From: Ajay Gupta Date: Fri, 26 Oct 2018 16:36:58 +0000 (-0700) Subject: i2c: add i2c bus driver for NVIDIA GPU X-Git-Tag: v5.15~7609^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c71bcdcb42a7493348d3b45dee8139843bf45efc;p=platform%2Fkernel%2Flinux-starfive.git i2c: add i2c bus driver for NVIDIA GPU Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta Reviewed-by: Andy Shevchenko [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang --- diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu new file mode 100644 index 0000000..31884d2 --- /dev/null +++ b/Documentation/i2c/busses/i2c-nvidia-gpu @@ -0,0 +1,18 @@ +Kernel driver i2c-nvidia-gpu + +Datasheet: not publicly available. + +Authors: + Ajay Gupta + +Description +----------- + +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing +and later GPUs and it is used to communicate with Type-C controller on GPUs. + +If your 'lspci -v' listing shows something like the following, + +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1) + +then this driver should support the I2C controller of your GPU. diff --git a/MAINTAINERS b/MAINTAINERS index 259fe94..1835d3f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6861,6 +6861,13 @@ L: linux-acpi@vger.kernel.org S: Maintained F: drivers/i2c/i2c-core-acpi.c +I2C CONTROLLER DRIVER FOR NVIDIA GPU +M: Ajay Gupta +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-nvidia-gpu +F: drivers/i2c/busses/i2c-nvidia-gpu.c + I2C MUXES M: Peter Rosin L: linux-i2c@vger.kernel.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 77dc94b..f2c6819 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985 This driver can also be built as a module. If so, the module will be called i2c-nforce2-s4985. +config I2C_NVIDIA_GPU + tristate "NVIDIA GPU I2C controller" + depends on PCI + help + If you say yes to this option, support will be included for the + NVIDIA GPU I2C controller which is used to communicate with the GPU's + Type-C controller. This driver can also be built as a module called + i2c-nvidia-gpu. + config I2C_SIS5595 tristate "SiS 5595" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 18b26af..5f0cb69 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_ISCH) += i2c-isch.o obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o +obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c new file mode 100644 index 0000000..744f5e4 --- /dev/null +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nvidia GPU I2C controller Driver + * + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* I2C definitions */ +#define I2C_MST_CNTL 0x00 +#define I2C_MST_CNTL_GEN_START BIT(0) +#define I2C_MST_CNTL_GEN_STOP BIT(1) +#define I2C_MST_CNTL_CMD_READ (1 << 2) +#define I2C_MST_CNTL_CMD_WRITE (2 << 2) +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6 +#define I2C_MST_CNTL_GEN_NACK BIT(28) +#define I2C_MST_CNTL_STATUS GENMASK(30, 29) +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29) +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29) +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29) +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29) +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31) + +#define I2C_MST_ADDR 0x04 + +#define I2C_MST_I2C0_TIMING 0x08 +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24) + +#define I2C_MST_DATA 0x0c + +#define I2C_MST_HYBRID_PADCTL 0x20 +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0) +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14) +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15) + +struct gpu_i2c_dev { + struct device *dev; + void __iomem *regs; + struct i2c_adapter adapter; + struct i2c_board_info *gpu_ccgx_ucsi; +}; + +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) +{ + u32 val; + + /* enable I2C */ + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL); + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C | + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV; + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL); + + /* enable 100KHZ mode */ + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ; + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT); + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK; + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); +} + +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) +{ + unsigned long target = jiffies + msecs_to_jiffies(1000); + u32 val; + + do { + val = readl(i2cd->regs + I2C_MST_CNTL); + if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER)) + break; + if ((val & I2C_MST_CNTL_STATUS) != + I2C_MST_CNTL_STATUS_BUS_BUSY) + break; + usleep_range(500, 600); + } while (time_is_after_jiffies(target)); + + if (time_is_before_jiffies(target)) { + dev_err(i2cd->dev, "i2c timeout error %x\n", val); + return -ETIME; + } + + val = readl(i2cd->regs + I2C_MST_CNTL); + switch (val & I2C_MST_CNTL_STATUS) { + case I2C_MST_CNTL_STATUS_OKAY: + return 0; + case I2C_MST_CNTL_STATUS_NO_ACK: + return -EIO; + case I2C_MST_CNTL_STATUS_TIMEOUT: + return -ETIME; + default: + return 0; + } +} + +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len) +{ + int status; + u32 val; + + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ | + (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) | + I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK; + writel(val, i2cd->regs + I2C_MST_CNTL); + + status = gpu_i2c_check_status(i2cd); + if (status < 0) + return status; + + val = readl(i2cd->regs + I2C_MST_DATA); + switch (len) { + case 1: + data[0] = val; + break; + case 2: + put_unaligned_be16(val, data); + break; + case 3: + put_unaligned_be16(val >> 8, data); + data[2] = val; + break; + case 4: + put_unaligned_be32(val, data); + break; + default: + break; + } + return status; +} + +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) +{ + u32 val; + + writel(data, i2cd->regs + I2C_MST_DATA); + + val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT); + writel(val, i2cd->regs + I2C_MST_CNTL); + + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap); + int status, status2; + int i, j; + + /* + * The controller supports maximum 4 byte read due to known + * limitation of sending STOP after every read. + */ + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) { + /* program client address before starting read */ + writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR); + /* gpu_i2c_read has implicit start */ + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len); + if (status < 0) + goto stop; + } else { + u8 addr = i2c_8bit_addr_from_msg(msgs + i); + + status = gpu_i2c_start(i2cd); + if (status < 0) { + if (i == 0) + return status; + goto stop; + } + + status = gpu_i2c_write(i2cd, addr); + if (status < 0) + goto stop; + + for (j = 0; j < msgs[i].len; j++) { + status = gpu_i2c_write(i2cd, msgs[i].buf[j]); + if (status < 0) + goto stop; + } + } + } + status = gpu_i2c_stop(i2cd); + if (status < 0) + return status; + + return i; +stop: + status2 = gpu_i2c_stop(i2cd); + if (status2 < 0) + dev_err(i2cd->dev, "i2c stop failed %d\n", status2); + return status; +} + +static const struct i2c_adapter_quirks gpu_i2c_quirks = { + .max_read_len = 4, + .flags = I2C_AQ_COMB_WRITE_THEN_READ, +}; + +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm gpu_i2c_algorithm = { + .master_xfer = gpu_i2c_master_xfer, + .functionality = gpu_i2c_functionality, +}; + +/* + * This driver is for Nvidia GPU cards with USB Type-C interface. + * We want to identify the cards using vendor ID and class code only + * to avoid dependency of adding product id for any new card which + * requires this driver. + * Currently there is no class code defined for UCSI device over PCI + * so using UNKNOWN class for now and it will be updated when UCSI + * over PCI gets a class code. + * There is no other NVIDIA cards with UNKNOWN class code. Even if the + * driver gets loaded for an undesired card then eventually i2c_read() + * (initiated from UCSI i2c_client) will timeout or UCSI commands will + * timeout. + */ +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80 +static const struct pci_device_id gpu_i2c_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00}, + { } +}; +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids); + +static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) +{ + struct i2c_client *ccgx_client; + + i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev, + sizeof(*i2cd->gpu_ccgx_ucsi), + GFP_KERNEL); + if (!i2cd->gpu_ccgx_ucsi) + return -ENOMEM; + + strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi", + sizeof(i2cd->gpu_ccgx_ucsi->type)); + i2cd->gpu_ccgx_ucsi->addr = 0x8; + i2cd->gpu_ccgx_ucsi->irq = irq; + ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi); + if (!ccgx_client) + return -ENODEV; + + return 0; +} + +static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct gpu_i2c_dev *i2cd; + int status; + + i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL); + if (!i2cd) + return -ENOMEM; + + i2cd->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, i2cd); + + status = pcim_enable_device(pdev); + if (status < 0) { + dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status); + return status; + } + + pci_set_master(pdev); + + i2cd->regs = pcim_iomap(pdev, 0, 0); + if (!i2cd->regs) { + dev_err(&pdev->dev, "pcim_iomap failed\n"); + return -ENOMEM; + } + + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (status < 0) { + dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status); + return status; + } + + gpu_enable_i2c_bus(i2cd); + + i2c_set_adapdata(&i2cd->adapter, i2cd); + i2cd->adapter.owner = THIS_MODULE; + strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter", + sizeof(i2cd->adapter.name)); + i2cd->adapter.algo = &gpu_i2c_algorithm; + i2cd->adapter.quirks = &gpu_i2c_quirks; + i2cd->adapter.dev.parent = &pdev->dev; + status = i2c_add_adapter(&i2cd->adapter); + if (status < 0) + goto free_irq_vectors; + + status = gpu_populate_client(i2cd, pdev->irq); + if (status < 0) { + dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status); + goto del_adapter; + } + + return 0; + +del_adapter: + i2c_del_adapter(&i2cd->adapter); +free_irq_vectors: + pci_free_irq_vectors(pdev); + return status; +} + +static void gpu_i2c_remove(struct pci_dev *pdev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev); + + i2c_del_adapter(&i2cd->adapter); + pci_free_irq_vectors(pdev); +} + +static int gpu_i2c_resume(struct device *dev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev); + + gpu_enable_i2c_bus(i2cd); + return 0; +} + +UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); + +static struct pci_driver gpu_i2c_driver = { + .name = "nvidia-gpu", + .id_table = gpu_i2c_ids, + .probe = gpu_i2c_probe, + .remove = gpu_i2c_remove, + .driver = { + .pm = &gpu_i2c_driver_pm, + }, +}; + +module_pci_driver(gpu_i2c_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver"); +MODULE_LICENSE("GPL v2");