From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Tue, 3 Dec 2019 12:04:47 +0000 (+0200)
Subject: board: colibri_imx7: reserve DDR memory for Cortex-M4
X-Git-Tag: v2020.10~457^2~10
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c671d8af0bb07b028d808b994b83b2ec25578a44;p=platform%2Fkernel%2Fu-boot.git

board: colibri_imx7: reserve DDR memory for Cortex-M4

i.MX 7's Cortex-M4 core can run from DDR and uses DDR memory for
the rpmsg communication. Both use cases need a fixed location of
memory reserved. For the rpmsg use case the reserved area needs
to be in sync with the kernel's hardcoded vring descriptor location.

Use the linux,usable-memory property to carve out 1MB of memory
in case the M4 core is running. Also make sure that the i.MX 7
specific rpmsg driver does not get loaded in case we do not carve
out memory.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---

diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index 52c83ba..c9b509e 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -153,6 +153,8 @@ void init_src(void);
 void init_snvs(void);
 void imx_wdog_disable_powerdown(void);
 
+int arch_auxiliary_core_check_up(u32 core_id);
+
 int board_mmc_get_env_dev(int devno);
 
 int nxp_board_rev(void);
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index c001316..b0914a9 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -333,6 +333,43 @@ int checkboard(void)
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_IMX_BOOTAUX) && defined(CONFIG_ARCH_FIXUP_FDT_MEMORY)
+	int up;
+
+	up = arch_auxiliary_core_check_up(0);
+	if (up) {
+		int ret;
+		int areas = 1;
+		u64 start[2], size[2];
+
+		/*
+		 * Reserve 1MB of memory for M4 (1MiB is also the minimum
+		 * alignment for Linux due to MMU section size restrictions).
+		 */
+		start[0] = gd->bd->bi_dram[0].start;
+		size[0] = SZ_256M - SZ_1M;
+
+		/* If needed, create a second entry for memory beyond 256M */
+		if (gd->bd->bi_dram[0].size > SZ_256M) {
+			start[1] = gd->bd->bi_dram[0].start + SZ_256M;
+			size[1] = gd->bd->bi_dram[0].size - SZ_256M;
+			areas = 2;
+		}
+
+		ret = fdt_set_usable_memory(blob, start, size, areas);
+		if (ret) {
+			eprintf("Cannot set usable memory\n");
+			return ret;
+		}
+	} else {
+		int off;
+
+		off = fdt_node_offset_by_compatible(blob, -1,
+						    "fsl,imx7d-rpmsg");
+		if (off > 0)
+			fdt_status_disabled(blob, off);
+	}
+#endif
 #if defined(CONFIG_FDT_FIXUP_PARTITIONS)
 	static const struct node_info nodes[] = {
 		{ "fsl,imx7d-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */