From: Florian Fainelli Date: Thu, 16 Jul 2015 22:51:17 +0000 (-0700) Subject: net: bcmgenet: Determine PHY type before scanning MDIO bus X-Git-Tag: v4.9.8~3644^2~341^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c624f89121020882b3db0a33cac8daf151d2930f;p=platform%2Fkernel%2Flinux-rpi3.git net: bcmgenet: Determine PHY type before scanning MDIO bus Our internal GPHY might be powered off before we attempt scanning the MDIO bus and bind a driver to it. The way we are currently determining whether a PHY is internal or not is done *after* we have successfully matched its driver. If the PHY is powered down, it will not respond to the MDIO bus, so we will not be able to bind a driver to it. Our Device Tree for GENET interfaces specifies a "phy-mode" value: "internal" which tells if this internal uses an internal PHY or not. If of_get_phy_mode() fails to parse the 'phy-mode' property, do an additional manual lookup, and if we find "internal" set the corresponding internal variable accordingly. Replace all uses of phy_is_internal() with a check against priv->internal_phy to avoid having to rely on whether or not priv->phydev is set correctly. Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 2efe72f..0765654 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1724,7 +1724,7 @@ static int init_umac(struct bcmgenet_priv *priv) int0_enable |= UMAC_IRQ_TXDMA_DONE; /* Monitor cable plug/unplugged event for internal PHY */ - if (phy_is_internal(priv->phydev)) { + if (priv->internal_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; } else if (priv->ext_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; @@ -2631,7 +2631,7 @@ static int bcmgenet_open(struct net_device *dev) /* If this is an internal GPHY, power it back on now, before UniMAC is * brought out of reset as absolutely no UniMAC activity is allowed */ - if (phy_is_internal(priv->phydev)) + if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); /* take MAC out of reset */ @@ -2650,7 +2650,7 @@ static int bcmgenet_open(struct net_device *dev) bcmgenet_set_hw_addr(priv, dev->dev_addr); - if (phy_is_internal(priv->phydev)) { + if (priv->internal_phy) { reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); reg |= EXT_ENERGY_DET_MASK; bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); @@ -2756,7 +2756,7 @@ static int bcmgenet_close(struct net_device *dev) free_irq(priv->irq0, priv); free_irq(priv->irq1, priv); - if (phy_is_internal(priv->phydev)) + if (priv->internal_phy) ret = bcmgenet_power_down(priv, GENET_POWER_PASSIVE); if (!IS_ERR(priv->clk)) @@ -3318,7 +3318,7 @@ static int bcmgenet_suspend(struct device *d) if (device_may_wakeup(d) && priv->wolopts) { ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC); clk_prepare_enable(priv->clk_wol); - } else if (phy_is_internal(priv->phydev)) { + } else if (priv->internal_phy) { ret = bcmgenet_power_down(priv, GENET_POWER_PASSIVE); } @@ -3347,7 +3347,7 @@ static int bcmgenet_resume(struct device *d) /* If this is an internal GPHY, power it back on now, before UniMAC is * brought out of reset as absolutely no UniMAC activity is allowed */ - if (phy_is_internal(priv->phydev)) + if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); bcmgenet_umac_reset(priv); @@ -3369,7 +3369,7 @@ static int bcmgenet_resume(struct device *d) bcmgenet_set_hw_addr(priv, dev->dev_addr); - if (phy_is_internal(priv->phydev)) { + if (priv->internal_phy) { reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); reg |= EXT_ENERGY_DET_MASK; bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 9f9ac00..84274de 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -593,6 +593,7 @@ struct bcmgenet_priv { /* MDIO bus variables */ wait_queue_head_t wq; struct phy_device *phydev; + bool internal_phy; struct device_node *phy_dn; struct device_node *mdio_dn; struct mii_bus *mii_bus; diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index c5f9c7b..35df947 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -227,10 +227,10 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) u32 port_ctrl; u32 reg; - priv->ext_phy = !phy_is_internal(priv->phydev) && + priv->ext_phy = !priv->internal_phy && (priv->phy_interface != PHY_INTERFACE_MODE_MOCA); - if (phy_is_internal(priv->phydev)) + if (priv->internal_phy) priv->phy_interface = PHY_INTERFACE_MODE_NA; switch (priv->phy_interface) { @@ -248,7 +248,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); - if (phy_is_internal(priv->phydev)) { + if (priv->internal_phy) { phy_name = "internal PHY"; bcmgenet_internal_phy_setup(dev); } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { @@ -386,7 +386,7 @@ static int bcmgenet_mii_probe(struct net_device *dev) /* The internal PHY has its link interrupts routed to the * Ethernet MAC ISRs */ - if (phy_is_internal(priv->phydev)) + if (priv->internal_phy) priv->mii_bus->irq[phydev->addr] = PHY_IGNORE_INTERRUPT; else priv->mii_bus->irq[phydev->addr] = PHY_POLL; @@ -479,7 +479,9 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) { struct device_node *dn = priv->pdev->dev.of_node; struct device *kdev = &priv->pdev->dev; + const char *phy_mode_str = NULL; char *compat; + int phy_mode; int ret; compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version); @@ -503,7 +505,24 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0); /* Get the link mode */ - priv->phy_interface = of_get_phy_mode(dn); + phy_mode = of_get_phy_mode(dn); + priv->phy_interface = phy_mode; + + /* We need to specifically look up whether this PHY interface is internal + * or not *before* we even try to probe the PHY driver over MDIO as we + * may have shut down the internal PHY for power saving purposes. + */ + if (phy_mode < 0) { + ret = of_property_read_string(dn, "phy-mode", &phy_mode_str); + if (ret < 0) { + dev_err(kdev, "invalid PHY mode property\n"); + return ret; + } + + priv->phy_interface = PHY_INTERFACE_MODE_NA; + if (!strcasecmp(phy_mode_str, "internal")) + priv->internal_phy = true; + } return 0; }