From: Ondrej Zary Date: Tue, 27 Sep 2016 19:00:23 +0000 (+0200) Subject: scsi: g_NCR5380: Remove deprecated __setup X-Git-Tag: v4.14-rc1~2270^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c47946c2dda311216ac11e981809b2d70609258f;p=platform%2Fkernel%2Flinux-rpi.git scsi: g_NCR5380: Remove deprecated __setup Remove deprecated __setup for parsing command line parameters. g_NCR5380.* parameters could be used instead. This might break existing setups with g_NCR5380 built-in (if there are any). But it has to go in order to remove the overrides[] array. Signed-off-by: Ondrej Zary Acked-by: Finn Thain Signed-off-by: Martin K. Petersen --- diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt index fd88015..843cbae 100644 --- a/Documentation/scsi/g_NCR5380.txt +++ b/Documentation/scsi/g_NCR5380.txt @@ -21,16 +21,6 @@ NCR53c400 card, the Trantor T130B in its default configuration: The NCR53c400 does not support DMA but it does have Pseudo-DMA which is supported by the driver. -If the default configuration does not work for you, you can use the kernel -command lines (eg using the lilo append command): - ncr5380=addr,irq - ncr53c400=addr,irq - ncr53c400a=addr,irq - dtc3181e=addr,irq - -The driver does not probe for any addresses or ports other than those in -the OVERRIDE or given to the kernel as above. - This driver provides some information on what it has detected in /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot time. More info to come in the future. diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 516bd6c..7e50b44e 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -56,136 +56,6 @@ static struct override { #define NO_OVERRIDES ARRAY_SIZE(overrides) -#ifndef MODULE - -/** - * internal_setup - handle lilo command string override - * @board: BOARD_* identifier for the board - * @str: unused - * @ints: numeric parameters - * - * Do LILO command line initialization of the overrides array. Display - * errors when needed - * - * Locks: none - */ - -static void __init internal_setup(int board, char *str, int *ints) -{ - static int commandline_current; - switch (board) { - case BOARD_NCR5380: - if (ints[0] != 2 && ints[0] != 3) { - printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n"); - return; - } - break; - case BOARD_NCR53C400: - if (ints[0] != 2) { - printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n"); - return; - } - break; - case BOARD_NCR53C400A: - if (ints[0] != 2) { - printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n"); - return; - } - break; - case BOARD_DTC3181E: - if (ints[0] != 2) { - printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n"); - return; - } - break; - } - - if (commandline_current < NO_OVERRIDES) { - overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1]; - overrides[commandline_current].irq = ints[2]; - if (ints[0] == 3) - overrides[commandline_current].dma = ints[3]; - else - overrides[commandline_current].dma = DMA_NONE; - overrides[commandline_current].board = board; - ++commandline_current; - } -} - - -/** - * do_NCR53C80_setup - set up entry point - * @str: unused - * - * Setup function invoked at boot to parse the ncr5380= command - * line. - */ - -static int __init do_NCR5380_setup(char *str) -{ - int ints[10]; - - get_options(str, ARRAY_SIZE(ints), ints); - internal_setup(BOARD_NCR5380, str, ints); - return 1; -} - -/** - * do_NCR53C400_setup - set up entry point - * @str: unused - * @ints: integer parameters from kernel setup code - * - * Setup function invoked at boot to parse the ncr53c400= command - * line. - */ - -static int __init do_NCR53C400_setup(char *str) -{ - int ints[10]; - - get_options(str, ARRAY_SIZE(ints), ints); - internal_setup(BOARD_NCR53C400, str, ints); - return 1; -} - -/** - * do_NCR53C400A_setup - set up entry point - * @str: unused - * @ints: integer parameters from kernel setup code - * - * Setup function invoked at boot to parse the ncr53c400a= command - * line. - */ - -static int __init do_NCR53C400A_setup(char *str) -{ - int ints[10]; - - get_options(str, ARRAY_SIZE(ints), ints); - internal_setup(BOARD_NCR53C400A, str, ints); - return 1; -} - -/** - * do_DTC3181E_setup - set up entry point - * @str: unused - * @ints: integer parameters from kernel setup code - * - * Setup function invoked at boot to parse the dtc3181e= command - * line. - */ - -static int __init do_DTC3181E_setup(char *str) -{ - int ints[10]; - - get_options(str, ARRAY_SIZE(ints), ints); - internal_setup(BOARD_DTC3181E, str, ints); - return 1; -} - -#endif - #ifndef SCSI_G_NCR5380_MEM /* * Configure I/O address of 53C400A or DTC436 by writing magic numbers @@ -741,8 +611,3 @@ static struct isapnp_device_id id_table[] = { MODULE_DEVICE_TABLE(isapnp, id_table); #endif - -__setup("ncr5380=", do_NCR5380_setup); -__setup("ncr53c400=", do_NCR53C400_setup); -__setup("ncr53c400a=", do_NCR53C400A_setup); -__setup("dtc3181e=", do_DTC3181E_setup);