From: Christoph Hellwig Date: Fri, 21 Feb 2020 14:08:12 +0000 (-0800) Subject: scsi: ufshcd: use an enum for quirks X-Git-Tag: v5.15~4079^2~165 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c3f7d1fcb4a26a0f2a45e0e3bd8a1acc19481b8c;p=platform%2Fkernel%2Flinux-starfive.git scsi: ufshcd: use an enum for quirks Use an enum to specify the various quirks instead of #defines inside the structure definition. [mkp: fix typo] Link: https://lore.kernel.org/r/20200221140812.476338-3-hch@lst.de Reviewed-by: Bart Van Assche Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 6f22f466..d45a044 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -470,6 +470,48 @@ struct ufs_stats { struct ufs_err_reg_hist task_abort; }; +enum ufshcd_quirks { + /* Interrupt aggregation support is broken */ + UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, + + /* + * delay before each dme command is required as the unipro + * layer has shown instabilities + */ + UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1, + + /* + * If UFS host controller is having issue in processing LCC (Line + * Control Command) coming from device then enable this quirk. + * When this quirk is enabled, host controller driver should disable + * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE + * attribute of device to 0). + */ + UFSHCD_QUIRK_BROKEN_LCC = 1 << 2, + + /* + * The attribute PA_RXHSUNTERMCAP specifies whether or not the + * inbound Link supports unterminated line in HS mode. Setting this + * attribute to 1 fixes moving to HS gear. + */ + UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3, + + /* + * This quirk needs to be enabled if the host controller only allows + * accessing the peer dme attributes in AUTO mode (FAST AUTO or + * SLOW AUTO). + */ + UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4, + + /* + * This quirk needs to be enabled if the host controller doesn't + * advertise the correct version in UFS_VER register. If this quirk + * is enabled, standard UFS host driver will call the vendor specific + * ops (get_ufs_hci_version) to get the correct version. + */ + UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5, +}; + /** * struct ufs_hba - per adapter private structure * @mmio_base: UFSHCI base register address @@ -573,46 +615,6 @@ struct ufs_hba { bool is_irq_enabled; enum ufs_ref_clk_freq dev_ref_clk_freq; - /* Interrupt aggregation support is broken */ - #define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1 - - /* - * delay before each dme command is required as the unipro - * layer has shown instabilities - */ - #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS 0x2 - - /* - * If UFS host controller is having issue in processing LCC (Line - * Control Command) coming from device then enable this quirk. - * When this quirk is enabled, host controller driver should disable - * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE - * attribute of device to 0). - */ - #define UFSHCD_QUIRK_BROKEN_LCC 0x4 - - /* - * The attribute PA_RXHSUNTERMCAP specifies whether or not the - * inbound Link supports unterminated line in HS mode. Setting this - * attribute to 1 fixes moving to HS gear. - */ - #define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP 0x8 - - /* - * This quirk needs to be enabled if the host contoller only allows - * accessing the peer dme attributes in AUTO mode (FAST AUTO or - * SLOW AUTO). - */ - #define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE 0x10 - - /* - * This quirk needs to be enabled if the host contoller doesn't - * advertise the correct version in UFS_VER register. If this quirk - * is enabled, standard UFS host driver will call the vendor specific - * ops (get_ufs_hci_version) to get the correct version. - */ - #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20 - unsigned int quirks; /* Deviations from standard UFSHCI spec. */ /* Device deviations from standard UFS device spec. */