From: Hans de Goede Date: Sun, 16 Nov 2014 12:56:57 +0000 (+0100) Subject: clk: sunxi: gmac-tx-clk mux is not a CLK_MUX_INDEX_BIT mux X-Git-Tag: v5.15~16605^2~15^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c1ec51603053260b138fc98e2ed18a5a9bea4515;p=platform%2Fkernel%2Flinux-starfive.git clk: sunxi: gmac-tx-clk mux is not a CLK_MUX_INDEX_BIT mux A CLK_MUX_INDEX_BIT mux has one bit per parent, but the sun7i-a20-gmac-clk has 2 bits selecting between 3 possible parents using values of 0, 1, 2, which makes it a regular mux which should not have CLK_MUX_INDEX_BIT set in its flag. However we do not support parent 1 (an external clock), so use a table to select parent 0 or 2, which are the 2 parents we support. Note this has not been causing any issues sofar, because we start with a parent setting of parent 0, and only ever re-parent to parent 2 (for which we use an index of 1 as we skip parent 1) and with CLK_MUX_INDEX_BIT set we write a value of 2 for index 1. Tested on both a cubietruck (which uses rgmii mode) as well as a cs908 (an a31s board which uses mii mode). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- diff --git a/drivers/clk/sunxi/clk-a20-gmac.c b/drivers/clk/sunxi/clk-a20-gmac.c index 5296fd6..0dcf4f2 100644 --- a/drivers/clk/sunxi/clk-a20-gmac.c +++ b/drivers/clk/sunxi/clk-a20-gmac.c @@ -53,6 +53,11 @@ static DEFINE_SPINLOCK(gmac_lock); #define SUN7I_A20_GMAC_MASK 0x3 #define SUN7I_A20_GMAC_PARENTS 2 +static u32 sun7i_a20_gmac_mux_table[SUN7I_A20_GMAC_PARENTS] = { + 0x00, /* Select mii_phy_tx_clk */ + 0x02, /* Select gmac_int_tx_clk */ +}; + static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) { struct clk *clk; @@ -90,7 +95,7 @@ static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) gate->lock = &gmac_lock; mux->reg = reg; mux->mask = SUN7I_A20_GMAC_MASK; - mux->flags = CLK_MUX_INDEX_BIT; + mux->table = sun7i_a20_gmac_mux_table; mux->lock = &gmac_lock; clk = clk_register_composite(NULL, clk_name,