From: Bruce Allan Date: Fri, 16 Dec 2011 00:46:38 +0000 (+0000) Subject: e1000e: ICHx/PCHx LOMs should use LPLU setting in NVM when going to Sx X-Git-Tag: v3.4-rc1~177^2~466 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c077a9065b8d4612e4d55bd53c3563ca10d5c944;p=platform%2Fkernel%2Flinux-stable.git e1000e: ICHx/PCHx LOMs should use LPLU setting in NVM when going to Sx When going to Sx with an ICHx/PCH device, the default Low Power Link Up (LPLU, a.k.a. reverse auto-negotiation) behavior should be whatever is set in the NVM. However, the function e1000_suspend_workarounds_ich8lan() called when going to Sx always enabled LPLU in all power states. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 50a61fc..00b5e34 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -3698,9 +3698,10 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) * * During S0 to Sx transition, it is possible the link remains at gig * instead of negotiating to a lower speed. Before going to Sx, set - * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation - * to a lower speed. For PCH and newer parts, the OEM bits PHY register - * (LED, GbE disable and LPLU configurations) also needs to be written. + * 'Gig Disable' to force link speed negotiation to a lower speed based on + * the LPLU setting in the NVM or custom setting. For PCH and newer parts, + * the OEM bits PHY register (LED, GbE disable and LPLU configurations) also + * needs to be written. **/ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) { @@ -3708,7 +3709,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) s32 ret_val; phy_ctrl = er32(PHY_CTRL); - phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; + phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); if (hw->mac.type == e1000_ich8lan)