From: Kamlakant Patel Date: Thu, 27 Aug 2015 12:19:29 +0000 (+0530) Subject: spi: Add DT bindings documentation for Netlogic XLP SPI controller X-Git-Tag: v5.15~15214^2^4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bf9628373418328daf67b6508fc3713fc6f5067d;p=platform%2Fkernel%2Flinux-starfive.git spi: Add DT bindings documentation for Netlogic XLP SPI controller Add DT bindings documentation for SPI controller driver used by Netlogic XLP MIPS64 SoCs. Signed-off-by: Kamlakant Patel Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt new file mode 100644 index 0000000..40e82d5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt @@ -0,0 +1,39 @@ +SPI Master controller for Netlogic XLP MIPS64 SOCs +================================================== + +Currently this SPI controller driver is supported for the following +Netlogic XLP SoCs: + XLP832, XLP316, XLP208, XLP980, XLP532 + +Required properties: +- compatible : Should be "netlogic,xlp832-spi". +- #address-cells : Number of cells required to define a chip select address + on the SPI bus. +- #size-cells : Should be zero. +- reg : Should contain register location and length. +- clocks : Phandle of the spi clock +- interrupts : Interrupt number used by this controller. +- interrupt-parent : Phandle of the parent interrupt controller. + +SPI slave nodes must be children of the SPI master node and can contain +properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. + +Example: + + spi: xlp_spi@3a100 { + compatible = "netlogic,xlp832-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x3a100 0x100>; + clocks = <&spi_clk>; + interrupts = <34>; + interrupt-parent = <&pic>; + + spi_nor@1 { + compatible = "spansion,s25sl12801"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; /* Chip Select */ + spi-max-frequency = <40000000>; + }; +};