From: Stephen Warren Date: Fri, 21 Mar 2014 00:06:01 +0000 (-0600) Subject: ARM: tegra: fix board DT pinmux setup X-Git-Tag: v4.0~2098^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bf5fd5bf0a96a8bbc9c073118fc646bae13e24bd;p=platform%2Fkernel%2Flinux-amlogic.git ARM: tegra: fix board DT pinmux setup Neither Tegra114 nor Tegra124 allow "low power mode" to be configured on SDIO1 or SDIO3 drive groups. Remove the attempt to configure that option from the Dalmore and Venice2 DTs. The Venice2 DT contained duplicate configurations for most sdmmc1_* pins. Remove the duplicate pins from one of the nodes, and fix the configuration since the remaining clk pin is output-only. Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 73aecfb..eb54353 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -715,7 +715,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = ; @@ -725,7 +724,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <22>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = ; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c6dcef5..0b54743 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -138,14 +138,9 @@ nvidia,enable-input = ; }; sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0", - "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,enable-input = ; + nvidia,enable-input = ; nvidia,pull = ; nvidia,tristate = ; }; @@ -423,7 +418,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <32>; nvidia,pull-up-strength = <42>; nvidia,slew-rate-rising = ; @@ -433,7 +427,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <20>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = ;