From: Daniel Kochmański Date: Fri, 29 May 2015 15:21:00 +0000 (+0200) Subject: sunxi: spl: Remove redundant check from `board_mmc_init` for signature X-Git-Tag: v2015.10-rc1~69^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bf5b9b103c9ad9fa041b9913fb3a031c14566f5d;p=platform%2Fkernel%2Fu-boot.git sunxi: spl: Remove redundant check from `board_mmc_init` for signature Remove the boot signature check from board_mmc_init() in spl mode, as it is already done in spl_boot_device() in this case, and update the comments to reflect this. Signed-off-by: Daniel Kochmański CC: Roy Spliet Cc: Ian Campbell [hdegoede@redhat.com: Disable the check only for SPL instead of always] Acked-by: Hans De Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 76e4b9b..7220af3 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -294,17 +294,19 @@ int board_mmc_init(bd_t *bis) return -1; #endif -#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 +#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2 /* - * Both mmc0 and mmc2 are bootable, figure out where we're booting - * from. Try mmc0 first, just like the brom does. + * On systems with an emmc (mmc2), figure out if we are booting from + * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc. + * are searched there first. Note we only do this for u-boot proper, + * not for the SPL, see spl_boot_device(). */ - if (sunxi_mmc_has_egon_boot_signature(mmc0)) - return 0; - - /* no bootable card in mmc0, so we must be booting from mmc2, swap */ - mmc0->block_dev.dev = 1; - mmc1->block_dev.dev = 0; + if (!sunxi_mmc_has_egon_boot_signature(mmc0) && + sunxi_mmc_has_egon_boot_signature(mmc1)) { + /* Booting from emmc / mmc2, swap */ + mmc0->block_dev.dev = 1; + mmc1->block_dev.dev = 0; + } #endif return 0;