From: Yijing Wang Date: Thu, 30 May 2013 10:21:29 +0000 (+0800) Subject: net, ipw2x00: remove redundant D0 power state set X-Git-Tag: upstream/snapshot3+hdmi~4705^2~103^2^2~18 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bda96e8c6a751d8f57a5564e18adf33f2a2d857e;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git net, ipw2x00: remove redundant D0 power state set Pci_enable_device() will set device power state to D0, so it's no need to do it again in ipw2100_pci_init_one(). Signed-off-by: Yijing Wang Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 15920aa..f8ab193 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6242,8 +6242,6 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, if ((val & 0x0000ff00) != 0) pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); - pci_set_power_state(pci_dev, PCI_D0); - if (!ipw2100_hw_is_adapter_in_system(dev)) { printk(KERN_WARNING DRV_NAME "Device not found via register read.\n");