From: Nishanth Menon Date: Mon, 29 Jul 2013 17:03:03 +0000 (-0500) Subject: ARM: dts: omap5-uevm: update optional/unused regulator configurations X-Git-Tag: upstream/snapshot3+hdmi~4492^2~16^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bd3c5544a1e98a25d2d24c98779092e0f84373f7;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git ARM: dts: omap5-uevm: update optional/unused regulator configurations commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. The following optional/unused regulators can be updated: - SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be enabled only when audio is active. Since it does not come active by default, it does not require "always-on" or "boot-on". - LDO2 and LDO8 do not go to any peripheral or connector on the board. Further, these unused regulators should have been 2.8V for LDO2 and 3.0V for LDO8. Mark these LDOs as disabled in the dts until needed. Reported-by: Marc Jüttner Signed-off-by: Nishanth Menon Acked-by: J Keerthy Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 247c03c..65d7b60 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -331,8 +331,6 @@ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; @@ -355,10 +353,10 @@ ldo2_reg: ldo2 { /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { @@ -408,10 +406,11 @@ ldo8_reg: ldo8 { /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 {