From: Sean Anderson <sean.anderson@seco.com>
Date: Tue, 26 Apr 2022 18:31:49 +0000 (-0400)
Subject: ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB
X-Git-Tag: v2022.10~89^2~20^2~22
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bcb3dae32517a384138a953521436b37512fdd1c;p=platform%2Fkernel%2Fu-boot.git

ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB

These frequency calculations depend on the RCW format, which is not
dependent on any particular board. Switch to using ARCH symbols instead
of TARGET.

This whole function could probably use less ifdefs, but for now just do
a minimal conversion.

Fixes: 24cb6f2295 ("fsl-layerscape: Add fsl_esdhc peripheral clock support")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 570105a..840e6d4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -29,8 +29,8 @@ void get_sys_info(struct sys_info *sys_info)
  * mux 2 clock for LS1043A/LS1046A.
  */
 #if defined(CONFIG_SYS_DPAA_FMAN) || \
-	    defined(CONFIG_TARGET_LS1046ARDB) || \
-	    defined(CONFIG_TARGET_LS1043ARDB)
+	    defined(CONFIG_ARCH_LS1046A) || \
+	    defined(CONFIG_ARCH_LS1043A)
 	u32 rcw_tmp;
 #endif
 	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
@@ -129,13 +129,13 @@ void get_sys_info(struct sys_info *sys_info)
 
 #define HWA_CGA_M2_CLK_SEL	0x00000007
 #define HWA_CGA_M2_CLK_SHIFT	0
-#if defined(CONFIG_TARGET_LS1046ARDB) || defined(CONFIG_TARGET_LS1043ARDB)
+#if defined(CONFIG_ARCH_LS1046A) || defined(CONFIG_ARCH_LS1043A)
 	rcw_tmp = in_be32(&gur->rcwsr[15]);
 	switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
 	case 1:
 		sys_info->freq_cga_m2 = freq_c_pll[1];
 		break;
-#if defined(CONFIG_TARGET_LS1046ARDB)
+#if defined(CONFIG_ARCH_LS1046A)
 	case 2:
 		sys_info->freq_cga_m2 = freq_c_pll[1] / 2;
 		break;
@@ -143,7 +143,7 @@ void get_sys_info(struct sys_info *sys_info)
 	case 3:
 		sys_info->freq_cga_m2 = freq_c_pll[1] / 3;
 		break;
-#if defined(CONFIG_TARGET_LS1046ARDB)
+#if defined(CONFIG_ARCH_LS1046A)
 	case 6:
 		sys_info->freq_cga_m2 = freq_c_pll[0] / 2;
 		break;