From: Nils Carlson Date: Wed, 16 Dec 2009 00:47:42 +0000 (-0800) Subject: edac: i5100 add 6 ranks per channel X-Git-Tag: v3.0~6495^2~57 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=bbead2104e912571c3afb2aafe5ece1b446b56d9;p=platform%2Fkernel%2Flinux-amlogic.git edac: i5100 add 6 ranks per channel Add support for 6 ranks per channel to the i5100 chipset. I have tested the patch as far as possible with correctible errors and things appear good. The DIMM mapping is correct for our board, but boards may differ. Signed-off-by: Nils Carlson Acked-by: Arthur Jones Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index 9a93318..7785d8f 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -9,6 +9,11 @@ * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet * http://download.intel.com/design/chipsets/datashts/318378.pdf * + * The intel 5100 has two independent channels. EDAC core currently + * can not reflect this configuration so instead the chip-select + * rows for each respective channel are layed out one after another, + * the first half belonging to channel 0, the second half belonging + * to channel 1. */ #include #include @@ -734,7 +739,6 @@ static int i5100_read_spd_byte(const struct mem_ctl_info *mci, * fill dimm chip select map * * FIXME: - * o only valid for 4 ranks per channel * o not the only way to may chip selects to dimm slots * o investigate if there is some way to obtain this map from the bios */ @@ -743,8 +747,6 @@ static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci) struct i5100_priv *priv = mci->pvt_info; int i; - WARN_ON(priv->ranksperchan != 4); - for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) { int j; @@ -753,12 +755,21 @@ static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci) } /* only 2 chip selects per slot... */ - priv->dimm_csmap[0][0] = 0; - priv->dimm_csmap[0][1] = 3; - priv->dimm_csmap[1][0] = 1; - priv->dimm_csmap[1][1] = 2; - priv->dimm_csmap[2][0] = 2; - priv->dimm_csmap[3][0] = 3; + if (priv->ranksperchan == 4) { + priv->dimm_csmap[0][0] = 0; + priv->dimm_csmap[0][1] = 3; + priv->dimm_csmap[1][0] = 1; + priv->dimm_csmap[1][1] = 2; + priv->dimm_csmap[2][0] = 2; + priv->dimm_csmap[3][0] = 3; + } else { + priv->dimm_csmap[0][0] = 0; + priv->dimm_csmap[0][1] = 1; + priv->dimm_csmap[1][0] = 2; + priv->dimm_csmap[1][1] = 3; + priv->dimm_csmap[2][0] = 4; + priv->dimm_csmap[2][1] = 5; + } } static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev, @@ -905,13 +916,6 @@ static int __devinit i5100_init_one(struct pci_dev *pdev, pci_read_config_dword(pdev, I5100_MS, &dw); ranksperch = !!(dw & (1 << 8)) * 2 + 4; - if (ranksperch != 4) { - /* FIXME: get 6 ranks / channel to work - need hw... */ - printk(KERN_INFO "i5100_edac: unsupported configuration.\n"); - ret = -ENODEV; - goto bail_pdev; - } - /* enable error reporting... */ pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw); dw &= ~I5100_FERR_NF_MEM_ANY_MASK;