From: Jeff Kirsher Date: Wed, 22 Jun 2011 00:55:27 +0000 (-0700) Subject: ftgmac100/ftmac100: Move the Faraday drivers X-Git-Tag: v3.2-rc1~129^2~536 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=baf0fbfe7ea34cd676e3362a62033d8ca1c52d99;p=profile%2Fivi%2Fkernel-x86-ivi.git ftgmac100/ftmac100: Move the Faraday drivers Move the Faraday driver into drivers/net/ethernet/faraday/ and make the necessary Kconfig and Makefile changes. CC: "Po-Yu Chuang" Signed-off-by: Jeff Kirsher Acked-by: Po-Yu Chuang --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7f09cd5..8da9f96 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -922,15 +922,6 @@ config XILINX_EMACLITE help This driver supports the 10/100 Ethernet Lite from Xilinx. -config FTMAC100 - tristate "Faraday FTMAC100 10/100 Ethernet support" - depends on ARM - select MII - help - This driver supports the FTMAC100 10/100 Ethernet controller - from Faraday. It is used on Faraday A320, Andes AG101 and some - other ARM/NDS32 SoC's. - config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY @@ -1286,15 +1277,6 @@ config PCH_GBE ML7223 is companion chip for Intel Atom E6xx series. ML7223 is completely compatible for Intel EG20T PCH. -config FTGMAC100 - tristate "Faraday FTGMAC100 Gigabit Ethernet support" - depends on ARM - select PHYLIB - help - This driver supports the FTGMAC100 Gigabit Ethernet controller - from Faraday. It is used on Faraday A369, Andes AG102 and some - other ARM/NDS32 SoC's. - endif # NETDEV_1000 # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ffcb609..0b341dc 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -79,8 +79,6 @@ ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o endif obj-$(CONFIG_FORCEDETH) += forcedeth.o -obj-$(CONFIG_FTGMAC100) += ftgmac100.o -obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 45d3eff..110071e 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -20,6 +20,7 @@ source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" +source "drivers/net/ethernet/faraday/Kconfig" source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 09536de..4a6edf7 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/ +obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig new file mode 100644 index 0000000..b0d76f0 --- /dev/null +++ b/drivers/net/ethernet/faraday/Kconfig @@ -0,0 +1,38 @@ +# +# Faraday device configuration +# + +config NET_VENDOR_FARADAY + bool "Faraday devices" + depends on ARM + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Faraday cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_FARADAY + +config FTMAC100 + tristate "Faraday FTMAC100 10/100 Ethernet support" + depends on ARM + select MII + ---help--- + This driver supports the FTMAC100 10/100 Ethernet controller + from Faraday. It is used on Faraday A320, Andes AG101 and some + other ARM/NDS32 SoC's. + +config FTGMAC100 + tristate "Faraday FTGMAC100 Gigabit Ethernet support" + depends on ARM + select PHYLIB + ---help--- + This driver supports the FTGMAC100 Gigabit Ethernet controller + from Faraday. It is used on Faraday A369, Andes AG102 and some + other ARM/NDS32 SoC's. + +endif # NET_VENDOR_FARADAY diff --git a/drivers/net/ethernet/faraday/Makefile b/drivers/net/ethernet/faraday/Makefile new file mode 100644 index 0000000..408b539 --- /dev/null +++ b/drivers/net/ethernet/faraday/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Faraday device drivers. +# + +obj-$(CONFIG_FTGMAC100) += ftgmac100.o +obj-$(CONFIG_FTMAC100) += ftmac100.o diff --git a/drivers/net/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c similarity index 100% rename from drivers/net/ftgmac100.c rename to drivers/net/ethernet/faraday/ftgmac100.c diff --git a/drivers/net/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h similarity index 100% rename from drivers/net/ftgmac100.h rename to drivers/net/ethernet/faraday/ftgmac100.h diff --git a/drivers/net/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c similarity index 100% rename from drivers/net/ftmac100.c rename to drivers/net/ethernet/faraday/ftmac100.c diff --git a/drivers/net/ftmac100.h b/drivers/net/ethernet/faraday/ftmac100.h similarity index 100% rename from drivers/net/ftmac100.h rename to drivers/net/ethernet/faraday/ftmac100.h