From: Andrew Cagney Date: Wed, 28 Oct 1998 02:01:32 +0000 (+0000) Subject: Unify (well almost) --enable-build-warnings configuration option X-Git-Tag: gdb-4_18~954 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b9a9cde40b84c0c939b1f068befce7530393b4de;p=platform%2Fupstream%2Fbinutils.git Unify (well almost) --enable-build-warnings configuration option across GDB and SIM directories. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 9f30779..1aa1f21 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,11 @@ +Wed Oct 28 12:32:58 1998 Andrew Cagney + + * configure.in (--enable-build-warnings): Finish rename from + --enable-warnings. + (enable-build-warnings): Add -Wpointer-arth, allow =* for + sim/common compatibility. + * configure: Re-generate. + Wed Oct 21 08:44:30 1998 Andrew Cagney * 29k-share/udi/udip2soc.c: Replace sys_errlist with strerror(). diff --git a/gdb/configure b/gdb/configure index 29870c7..f69fa31 100755 --- a/gdb/configure +++ b/gdb/configure @@ -18,13 +18,15 @@ ac_help="$ac_help ac_help="$ac_help --enable-netrom " ac_help="$ac_help - --enable-build-warnings Enable compiler warnings if gcc is used" + --enable-build-warnings Enable build-time compiler warnings if gcc is used" ac_help="$ac_help --with-mmalloc Use memory mapped malloc package" +# start-sanitize-carp ac_help="$ac_help --enable-carp Configure alternative readaptive paradigm " ac_help="$ac_help --enable-targets alternative target configurations" +# end-sanitize-carp ac_help="$ac_help --enable-ide Enable IDE support" ac_help="$ac_help @@ -4616,20 +4618,22 @@ if test "${enable_netrom}" = "yes"; then CONFIG_SRCS="${CONFIG_SRCS} remote-nrom.c" fi -# Check whether --enable-warnings or --disable-warnings was given. -if test "${enable_warnings+set}" = set; then - enableval="$enable_warnings" - case "${enableval}" in -yes) enable_build_warnings=yes ;; -no) enable_build_warnings=no ;; -*) { echo "configure: error: bad value ${enableval} given for warnings options" 1>&2; exit 1; } ;; +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations" +case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + *) ;; esac +else + build_warnings="" fi - -if test "x$enable_build_warnings" = xyes -a "x$GCC" = xyes +if test "x${build_warnings}" != x -a "x$GCC" = xyes then - WARN_CFLAGS="-Wall -Wstrict-prototypes -Wmissing-prototypes" + WARN_CFLAGS="${build_warnings}" else WARN_CFLAGS="" fi @@ -4891,12 +4895,12 @@ fi # In the cygwin32 environment, we need some additional flags. echo $ac_n "checking for cygwin32""... $ac_c" 1>&6 -echo "configure:4895: checking for cygwin32" >&5 +echo "configure:4897: checking for cygwin32" >&5 if eval "test \"`echo '$''{'gdb_cv_os_cygwin32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 -echo "configure:4959: checking for Tcl configuration" >&5 +echo "configure:4961: checking for Tcl configuration" >&5 if eval "test \"`echo '$''{'ac_cv_c_tclconfig'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5063,7 +5067,7 @@ if test "${with_tkconfig+set}" = set; then fi echo $ac_n "checking for Tk configuration""... $ac_c" 1>&6 -echo "configure:5067: checking for Tk configuration" >&5 +echo "configure:5069: checking for Tk configuration" >&5 if eval "test \"`echo '$''{'ac_cv_c_tkconfig'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5159,7 +5163,7 @@ fi no_tcl=true echo $ac_n "checking for Tcl private headers. dir=${configdir}""... $ac_c" 1>&6 -echo "configure:5163: checking for Tcl private headers. dir=${configdir}" >&5 +echo "configure:5165: checking for Tcl private headers. dir=${configdir}" >&5 # Check whether --with-tclinclude or --without-tclinclude was given. if test "${with_tclinclude+set}" = set; then withval="$with_tclinclude" @@ -5225,17 +5229,17 @@ fi if test x"${ac_cv_c_tclh}" = x ; then ac_safe=`echo "tclInt.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for tclInt.h""... $ac_c" 1>&6 -echo "configure:5229: checking for tclInt.h" >&5 +echo "configure:5231: checking for tclInt.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5239: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5295,7 +5299,7 @@ fi # no_tk=true echo $ac_n "checking for Tk private headers""... $ac_c" 1>&6 -echo "configure:5299: checking for Tk private headers" >&5 +echo "configure:5301: checking for Tk private headers" >&5 # Check whether --with-tkinclude or --without-tkinclude was given. if test "${with_tkinclude+set}" = set; then withval="$with_tkinclude" @@ -5361,17 +5365,17 @@ fi if test x"${ac_cv_c_tkh}" = x ; then ac_safe=`echo "tk.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for tk.h""... $ac_c" 1>&6 -echo "configure:5365: checking for tk.h" >&5 +echo "configure:5367: checking for tk.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5377: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5417,7 +5421,7 @@ fi echo $ac_n "checking for Itcl private headers. srcdir=${srcdir}""... $ac_c" 1>&6 -echo "configure:5421: checking for Itcl private headers. srcdir=${srcdir}" >&5 +echo "configure:5423: checking for Itcl private headers. srcdir=${srcdir}" >&5 if test x"${ac_cv_c_itclh}" = x ; then for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ; do if test -f $i/src/itcl.h ; then @@ -5440,7 +5444,7 @@ fi echo $ac_n "checking for Tix private headers. srcdir=${srcdir}""... $ac_c" 1>&6 -echo "configure:5444: checking for Tix private headers. srcdir=${srcdir}" >&5 +echo "configure:5446: checking for Tix private headers. srcdir=${srcdir}" >&5 if test x"${ac_cv_c_tixh}" = x ; then for i in ${srcdir}/../tix ${srcdir}/../../tix ${srcdir}/../../../tix ; do if test -f $i/generic/tix.h ; then @@ -5534,7 +5538,7 @@ fi # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:5538: checking for X" >&5 +echo "configure:5540: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -5596,12 +5600,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5607: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5670,14 +5674,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -5940,7 +5944,7 @@ links="${links} nm.h" fi # start-sanitize-gdbtk echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:5944: checking whether ln -s works" >&5 +echo "configure:5946: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5975,19 +5979,19 @@ fi echo $ac_n "checking for cygwin32 environment""... $ac_c" 1>&6 -echo "configure:5979: checking for cygwin32 environment" >&5 +echo "configure:5981: checking for cygwin32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin32=yes else @@ -6004,19 +6008,19 @@ echo "$ac_t""$ac_cv_cygwin32" 1>&6 CYGWIN32= test "$ac_cv_cygwin32" = yes && CYGWIN32=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:6008: checking for mingw32 environment" >&5 +echo "configure:6010: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:6022: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -6035,7 +6039,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:6039: checking for executable suffix" >&5 +echo "configure:6041: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6045,10 +6049,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:6049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:6051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done diff --git a/gdb/configure.in b/gdb/configure.in index 8f1afa8..d1537ad 100644 --- a/gdb/configure.in +++ b/gdb/configure.in @@ -294,17 +294,23 @@ if test "${enable_netrom}" = "yes"; then CONFIG_SRCS="${CONFIG_SRCS} remote-nrom.c" fi -AC_ARG_ENABLE(warnings, -[ --enable-build-warnings Enable compiler warnings if gcc is used], -[case "${enableval}" in -yes) enable_build_warnings=yes ;; -no) enable_build_warnings=no ;; -*) AC_MSG_ERROR(bad value ${enableval} given for warnings options) ;; -esac]) - -if test "x$enable_build_warnings" = xyes -a "x$GCC" = xyes +AC_ARG_ENABLE(build-warnings, +[ --enable-build-warnings Enable build-time compiler warnings if gcc is used], +[build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations" +case "${enableval}" in + yes) ;; + no) build_warnings="-w";; +dnl ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` +dnl build_warnings="${build_warnings} ${t}";; +dnl *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` +dnl build_warnings="${t} ${build_warnings}";; +dnl *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; + *) ;; +esac],[build_warnings=""])dnl + +if test "x${build_warnings}" != x -a "x$GCC" = xyes then - WARN_CFLAGS="-Wall -Wstrict-prototypes -Wmissing-prototypes" + WARN_CFLAGS="${build_warnings}" else WARN_CFLAGS="" fi diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 3921ec6..368f448 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,96 @@ +Wed Oct 28 12:00:57 1998 Andrew Cagney + + * aclocal.m4 (enable-build-warnings): Replace + enable-sim-warnings. Extend =LIST syntax so that prepend and + append of options is possible. Drop -Werror, add + -Wstrict-prototypes for GDB compatibility. + * Make-common.in (SIM_WARNINGS): Update. + +Mon Oct 19 13:56:32 1998 Doug Evans + + * Make-common.in (CGEN_INCLUDE_DEPS): Define. + (sim-core.o): Delete duplicate dependence on $(SIM_EXTRA_DEPS). + (sim-cpu.o,sim-endian.o,sim-hw.o): Ditto. + (cgen-run.o,cgen-scache.o,cgen-trace.o,cgen-utils.o): Delete + explicit cgen header dependencies, require SIM_EXTRA_DEPS to include + CGEN_INCLUDE_DEPS. + * cgen-cpu.h: New file. + * cgen-engine.h: New file. + * cgen-scache.h: New file. + * cgen-sim.h: Delete portions moved to new files. + * genmloop.sh: Generate two files eng.hin,mloop.cin explicitly, + rather than sending result to stdout. + +Fri Oct 9 14:20:22 1998 Doug Evans + + * Make-common.in (sim-reg.o): New rule. + (cgen-run.o): New rule. + * cgen-ops.h: Delete many BI macros. Change all UBI -> BI. + * cgen-run.c (prime_cpu): New function. + * cgen-scache.c: Add pseudo-basic-block (pbb) scaching support. + (scache_option_handler, case OPTION_PROFILE_SCACHE): Handle explicitly + mentioned cpu. + (scache_flush_cpu,scache_lookup,scache_lookup_or_alloc): New fns. + * cgen-sim.h (CGEN_INSN_VIRTUAL_TYPE): New enum. + (CGEN_INSN_VIRTUAL_P): New macro. + (SEM_PC): New typedef. + (SEMANTIC_FN): Change type of result to SEM_PC. + (SEM_SET_FULL_CODE,SEM_SET_FAST_CODE,SEM_SET_CODE): New macros. + (IDESC_CTI_P,IDESC_SKIP_P): New macros. + (SCACHE_MAP): New typedef. + (CPU_SCACHE): Add pbb support. + (scace_lookup,scache_lookup_or_alloc,scache_flush_cpu): Declare. + (SEM_BRANCH_INIT_EXTRACT,SEM_BRANCH_INIT,SEM_BRANCH_FINI): New macros. + (CGEN_CPU): New members running_p,insn_count,{fast,full}_engine_fn, + max_slice_insns. + (INSN_NAME): Delete. + (cgen_insn_name): Declare. + (sim_engine_invalid_insn): Renamed from sim_engine_illegal_insn. + * cgen-trace.c (trace_buf): Shrink from 1024 to 256 bytes. + (first_insn_p): Make static. + (trace_insn): Handle virtual insns specially. + (cgen_trace_printf): Ensure we haven't overflowed the buffer. + * cgen-types.h (UBI): Delete. + (MODE_TYPE): New enum. + (HOSTINT,HOSTUINT,HOSTPTR): Delete. + * cgen-utils.c (mode_names): Delete UBI. Add INT,UINT,PTR. + (cgen_virtual_opcode_table): New global. + (cgen_insn_name): New function. + (sim_disassemble_insn): Ignore virtual insns. + * genmloop.sh: Delete top level loop generation. Add pbb support. + * sim-cpu.h (CPU_INSN_NAME_FN): New typedef. + (sim_cpu_base): New members max_insns,insn_name,model_data. + (CPU_PC_GET,CPU_PC_SET): New macros. + (sim_pc_get,sim_pc_set): Declare. + * sim-model.c (model_set): Call model init fn. + * sim-model.h (MODEL_FN): New typedef. + (INSN_TIMING): New member model_fn. + (MODEL): New members num,init. + * sim-profile.c (sim_profile_print_bar): Renamed from print_bar. + All callers updated. + (profile_insn_init): New fn. + (profile_print_insn): Update, INSN_NAME -> CPU_INSN_NAME. + Exit early if insn profiling not supported. + (profile_print_memory): Update, MAX_MODES -> MODE_TARGET_MAX. + (profile_install): Record profile_insn_init as init fn. + (profile_uninstall): Free PROFILE_INSN_COUNT if non-null. + * sim-profile.h: Update, MAX_MODES -> MODE_TARGET_MAX. + (PROFILE_DATA): Delete member exec_time. + Change insn_count to pointer to array, rather than the array. + (sim_profile_print_bar): Declare. + +Wed Oct 7 16:56:42 1998 Doug Evans + + * cgen-run.c: New file. + * sim-reg.c: New file. + +Mon Sep 14 10:58:19 1998 Frank Ch. Eigler + + * aclocal.m4: Add checks for -lsocket and -lnsl. + + * dv-sockser.c (dv_sockser_init): Use SO_REUSEADDR to + allow local port reuse on listening socket. + Tue Sep 1 15:36:52 1998 Frank Ch. Eigler * sim-config.h: Remove reference to linux kernel header. diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 4d950b8..809160b 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -94,7 +94,7 @@ SIM_RESERVED_BITS = @sim_reserved_bits@ SIM_SCACHE = @sim_scache@ SIM_SMP = @sim_smp@ SIM_STDCALL = @sim_stdcall@ -SIM_WARNINGS = @sim_warnings@ +SIM_WARNINGS = @build_warnings@ SIM_XOR_ENDIAN = @sim_xor_endian@ HDEFINES = @HDEFINES@ @@ -175,7 +175,13 @@ SIM_NEW_COMMON_OBJS = \ \ $(SIM_HW_OBJS) \ - +CGEN_INCLUDE_DEPS = \ + $(srccom)/cgen-types.h \ + $(srccom)/cgen-sim.h \ + $(srccom)/cgen-scache.h \ + $(srccom)/cgen-cpu.h \ + $(srccom)/cgen-trace.h \ + $(srcdir)/../../include/opcode/cgen.h ## End COMMON_PRE_CONFIG_FRAG @@ -357,16 +363,13 @@ sim-config.o: $(srccom)/sim-config.c $(sim-config_h) \ $(CC) -c $(srccom)/sim-config.c $(ALL_CFLAGS) sim-core.o: $(srccom)/sim-core.c $(sim_main_headers) \ - $(sim-core_h) $(sim-n-core_h) \ - $(SIM_EXTRA_DEPS) + $(sim-core_h) $(sim-n-core_h) $(CC) -c $(srccom)/sim-core.c $(ALL_CFLAGS) -sim-cpu.o: $(srccom)/sim-cpu.c $(sim_main_headers) \ - $(SIM_EXTRA_DEPS) +sim-cpu.o: $(srccom)/sim-cpu.c $(sim_main_headers) $(CC) -c $(srccom)/sim-cpu.c $(ALL_CFLAGS) -sim-endian.o: $(srccom)/sim-endian.c $(sim-endian_h) $(sim-n-endian_h) \ - $(SIM_EXTRA_DEPS) +sim-endian.o: $(srccom)/sim-endian.c $(sim-endian_h) $(sim-n-endian_h) $(CC) -c $(srccom)/sim-endian.c $(ALL_CFLAGS) sim-engine.o: $(srccom)/sim-engine.c $(sim_main_headers) $(sim-engine_h) @@ -390,7 +393,7 @@ sim-hrw.o: $(srccom)/sim-hrw.c $(sim-assert_h) $(sim_core_h) \ $(SIM_EXTRA_DEPS) $(CC) -c $(srccom)/sim-hrw.c $(ALL_CFLAGS) -sim-hw.o: $(srccom)/sim-hw.c $(sim_main_headers) $(SIM_EXTRA_DEPS) +sim-hw.o: $(srccom)/sim-hw.c $(sim_main_headers) $(CC) -c $(srccom)/sim-hw.c $(ALL_CFLAGS) sim-info.o: $(srccom)/sim-info.c $(sim-assert_h) \ @@ -424,6 +427,10 @@ sim-reason.o: $(srccom)/sim-reason.c $(sim_main_headers) \ $(srcroot)/include/remote-sim.h $(CC) -c $(srccom)/sim-reason.c $(ALL_CFLAGS) +sim-reg.o: $(srccom)/sim-reg.c $(sim_main_headers) \ + $(srcroot)/include/remote-sim.h + $(CC) -c $(srccom)/sim-reg.c $(ALL_CFLAGS) + sim-resume.o: $(srccom)/sim-resume.c $(sim_main_headers) \ $(srcroot)/include/remote-sim.h $(CC) -c $(srccom)/sim-resume.c $(ALL_CFLAGS) @@ -509,6 +516,7 @@ hw-properties.o: $(srccom)/hw-properties.c $(hw_main_headers) hw-tree.o: $(srccom)/hw-tree.c $(hw_main_headers) $(hw-tree_h) $(CC) -c $(srccom)/hw-tree.c $(ALL_CFLAGS) +# Devices. dv-core.o: $(srccom)/dv-core.c $(hw_main_headers) $(sim_main_headers) $(CC) -c $(srccom)/dv-core.c $(ALL_CFLAGS) @@ -519,29 +527,28 @@ dv-glue.o: $(srccom)/dv-glue.c $(hw_main_headers) $(sim_main_headers) dv-pal.o: $(srccom)/dv-pal.c $(hw_main_headers) $(sim_main_headers) $(CC) -c $(srccom)/dv-pal.c $(ALL_CFLAGS) +dv-sockser.o: $(srccom)/dv-sockser.h $(sim_main_headers) + $(CC) -c $(srccom)/dv-sockser.c $(ALL_CFLAGS) + nrun.o: $(srccom)/nrun.c config.h tconfig.h \ $(srcroot)/include/remote-sim.h $(srcroot)/include/callback.h \ $(sim_main_headers) $(CC) -c $(srccom)/nrun.c $(ALL_CFLAGS) -# Devices. - -dv-sockser.o: $(srccom)/dv-sockser.h $(sim_main_headers) - $(CC) -c $(srccom)/dv-sockser.c $(ALL_CFLAGS) - # CGEN support. -cgen-scache.o: $(srccom)/cgen-scache.c $(sim_main_headers) \ - $(srccom)/cgen-sim.h +cgen-run.o: $(srccom)/cgen-run.c $(sim_main_headers) + $(CC) -c $(srccom)/cgen-run.c $(ALL_CFLAGS) + +cgen-scache.o: $(srccom)/cgen-scache.c $(sim_main_headers) $(CC) -c $(srccom)/cgen-scache.c $(ALL_CFLAGS) -cgen-trace.o: $(srccom)/cgen-trace.c $(sim_main_headers) \ - $(srccom)/cgen-sim.h $(srccom)/cgen-trace.h +cgen-trace.o: $(srccom)/cgen-trace.c $(sim_main_headers) $(CC) -c $(srccom)/cgen-trace.c $(ALL_CFLAGS) cgen-utils.o: $(srccom)/cgen-utils.c $(sim_main_headers) \ - $(srccom)/cgen-sim.h $(srccom)/cgen-mem.h $(srccom)/cgen-ops.h + $(srccom)/cgen-mem.h $(srccom)/cgen-ops.h $(CC) -c $(srccom)/cgen-utils.c $(ALL_CFLAGS) # Support targets. @@ -550,7 +557,7 @@ install: install-common $(SIM_EXTRA_INSTALL) install-common: installdirs n=`echo run | sed '$(program_transform_name)'`; \ - $(INSTALL_PROGRAM) run$(EXEEXT) $(bindir)/$$n + $(INSTALL_PROGRAM) run$(EXEEXT) $(bindir)/$$n$(EXEEXT) n=`echo libsim.a | sed s/libsim.a/lib$(target_alias)-sim.a/`; \ $(INSTALL_DATA) libsim.a $(libdir)/$$n ; \ ( cd $(libdir) ; $(RANLIB) $$n ) @@ -584,6 +591,7 @@ clean: $(SIM_EXTRA_CLEAN) if [ ! -f Make-common.in ] ; then \ rm -f $(BUILT_SRC_FROM_COMMON) ; \ fi + rm -f tmp-mloop.hin tmp-mloop.h tmp-mloop.cin tmp-mloop.c distclean mostlyclean maintainer-clean realclean: clean rm -f TAGS @@ -614,49 +622,56 @@ stamp-h: config.in config.status # CGEN support -SCHEME = @SCHEME@ -SCHEMEFLAGS = -s -srccgen = $(srcroot)/cgen +CGENDIR = @cgendir@ +CGEN = @cgen@ +CGENFLAGS = -v +srccgen = $(CGENDIR) -CGEN_VERBOSE = -v -CGEN_MAIN_SCM = $(srccgen)/object.scm $(srccgen)/utils.scm \ +CGEN_MAIN_SCM = $(srccgen)/cos.scm $(srccgen)/utils.scm \ $(srccgen)/attr.scm $(srccgen)/enum.scm $(srccgen)/types.scm \ $(srccgen)/utils-cgen.scm $(srccgen)/cpu.scm \ $(srccgen)/mode.scm $(srccgen)/mach.scm \ $(srccgen)/model.scm $(srccgen)/hardware.scm \ $(srccgen)/ifield.scm $(srccgen)/iformat.scm \ $(srccgen)/operand.scm $(srccgen)/insn.scm \ - $(srccgen)/cdl-c.scm $(srccgen)/sim.scm + $(srccgen)/rtl.scm $(srccgen)/sim.scm CGEN_CPU_SCM = $(srccgen)/sim-cpu.scm $(srccgen)/sim-model.scm CGEN_DECODE_SCM = $(srccgen)/sim-decode.scm # Various choices for which cpu specific files to generate. CGEN_CPU_EXTR = -E tmp-ext.c1 CGEN_CPU_READ = -R tmp-read.c1 +CGEN_CPU_WRITE = -W tmp-write.c1 CGEN_CPU_SEM = -S tmp-sem.c1 -CGEN_CPU_SEMSW = -W tmp-semsw.c1 +CGEN_CPU_SEMSW = -X tmp-semsw.c1 + +CGEN_FLAGS_TO_PASS = \ + CGEN=$(CGEN) \ + CGENFLAGS=$(CGENFLAGS) # We store the generated files in the source directory until we decide to # ship a Scheme interpreter with gdb/binutils. Maybe we never will. cgen-arch: force $(SHELL) $(srccom)/cgen.sh arch $(srcdir) \ - $(SCHEME) $(SCHEMEFLAGS) \ - $(srccgen) $(CGEN_VERBOSE) \ + $(CGEN) $(CGENDIR) $(CGENFLAGS) \ $(arch) "$(FLAGS)" ignored ignored ignored ignored cgen-cpu: force $(SHELL) $(srccom)/cgen.sh cpu $(srcdir) \ - $(SCHEME) $(SCHEMEFLAGS) \ - $(srccgen) $(CGEN_VERBOSE) \ + $(CGEN) $(CGENDIR) $(CGENFLAGS) \ $(arch) "$(FLAGS)" $(cpu) $(mach) "$(SUFFIX)" "$(EXTRAFILES)" cgen-decode: force $(SHELL) $(srccom)/cgen.sh decode $(srcdir) \ - $(SCHEME) $(SCHEMEFLAGS) \ - $(srccgen) $(CGEN_VERBOSE) \ + $(CGEN) $(CGENDIR) $(CGENFLAGS) \ $(arch) "$(FLAGS)" $(cpu) $(mach) "$(SUFFIX)" ignored +cgen-cpu-decode: force + $(SHELL) $(srccom)/cgen.sh cpu-decode $(srcdir) \ + $(CGEN) $(CGENDIR) $(CGENFLAGS) \ + $(arch) "$(FLAGS)" $(cpu) $(mach) "$(SUFFIX)" "$(EXTRAFILES)" + # end-sanitize-cygnus ## End COMMON_POST_CONFIG_FRAG diff --git a/sim/common/aclocal.m4 b/sim/common/aclocal.m4 index 2b906bd..02750bb 100644 --- a/sim/common/aclocal.m4 +++ b/sim/common/aclocal.m4 @@ -56,6 +56,10 @@ AC_CHECK_HEADERS(sys/time.h sys/resource.h) AC_CHECK_HEADERS(fcntl.h fpu_control.h) AC_CHECK_FUNCS(getrusage time sigaction __setfpucw) +# Check for socket libraries +AC_CHECK_LIB(socket, bind) +AC_CHECK_LIB(nsl, gethostbyname) + . ${srcdir}/../../bfd/configure.host dnl Standard (and optional) simulator options. @@ -201,6 +205,8 @@ AC_SUBST(sim_profile) dnl Types used by common code AC_TYPE_SIGNAL +dnl Detect exe extension +AM_EXEEXT dnl These are available to append to as desired. sim_link_files= @@ -551,44 +557,65 @@ AC_SUBST(sim_default_model) dnl --enable-sim-hardware is for users of the simulator -dnl arg[1] is a space separated list of devices that override the defaults -dnl arg[2] is a space separated list of extra target specific devices. +dnl arg[1] Enable sim-hw by default? ("yes" or "no") +dnl arg[2] is a space separated list of devices that override the defaults +dnl arg[3] is a space separated list of extra target specific devices. AC_DEFUN(SIM_AC_OPTION_HARDWARE, [ -sim_hardware="-DWITH_HW=1" -sim_hw_obj="hw-device.o hw-ports.o hw-properties.o hw-base.o hw-tree.o sim-hw.o" -hardware="ifelse([$1],,[core pal glue],[$1]) ifelse([$2],,,[$2])" +if test x"[$1]" = x"yes"; then + sim_hw_p=yes +else + sim_hw_p=no +fi +if test "[$2]"; then + hardware="core pal glue" +else + hardware="core pal glue [$3]" +fi +sim_hw_cflags="-DWITH_HW=1" +sim_hw="$hardware" +sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`" AC_ARG_ENABLE(sim-hardware, [ --enable-sim-hardware=LIST Specify the hardware to be included in the build.], [ case "${enableval}" in - yes) ;; - no) hardware=""; sim_hardware="-DWITH_HW=0"; sim_hw_obj="";; - ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; - *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; - *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; + yes) sim_hw_p=yes;; + no) sim_hw_p=no;; + ,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; esac -dnl remove duplicates -sim_hw="" -for i in x $hardware ; do - case " $f " in - x) ;; - *" $i "*) ;; - *) sim_hw="$sim_hw $i" ;; - esac -done -sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`" -if test x"$silent" != x"yes" && test x"$hardware" != x""; then - echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" +if test "$sim_hw_p" != yes; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +else + sim_hw_cflags="-DWITH_HW=1" + # remove duplicates + sim_hw="" + sim_hw_objs="\$(SIM_COMMON_HW_OBJS)" + for i in x $hardware ; do + case " $f " in + x) ;; + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";; + esac + done +fi +if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" fi],[ -sim_hw="$hardware" -sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`" +if test "$sim_hw_p" != yes; then + sim_hw_objs= + sim_hw_cflags="-DWITH_HW=0" + sim_hw= +fi if test x"$silent" != x"yes"; then - echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" + echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs" fi])dnl ]) -AC_SUBST(sim_hardware) -AC_SUBST(sim_hw_obj) +AC_SUBST(sim_hw_cflags) +AC_SUBST(sim_hw_objs) AC_SUBST(sim_hw) @@ -755,22 +782,27 @@ fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl AC_SUBST(sim_xor_endian) -dnl --enable-sim-warnings is for developers of the simulator. +dnl --enable-build-warnings is for developers of the simulator. dnl it enables extra GCC specific warnings. AC_DEFUN(SIM_AC_OPTION_WARNINGS, [ -AC_ARG_ENABLE(sim-warnings, -[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings], -[case "${enableval}" in - yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; - no) sim_warnings="-w";; - *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +AC_ARG_ENABLE(build-warnings, +[ --enable-build-warnings[=LIST] Enable build-time compiler warnings], +[build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations" +case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac -if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then - echo "Setting warning flags = $sim_warnings" 6>&1 -fi],[sim_warnings=""])dnl +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 +fi],[build_warnings=""])dnl ]) -AC_SUBST(sim_warnings) +AC_SUBST(build_warnings) dnl Generate the Makefile in a target specific directory. @@ -1143,3 +1175,48 @@ AC_DEFUN(AM_LC_MESSAGES, fi fi]) +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + +dnl AM_CYGWIN32() +dnl You might think we can do this by checking for a cygwin32-specific +dnl cpp define. +AC_DEFUN(AM_CYGWIN32, +[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32, +[AC_TRY_COMPILE(,[int main () { return __CYGWIN32__; }], +am_cv_cygwin32=yes, am_cv_cygwin32=no) +rm -f conftest*]) +CYGWIN32= +test "$am_cv_cygwin32" = yes && CYGWIN32=yes]) + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + +dnl AM_EXEEXT() +dnl This knows we add .exe if we're building in the Cygwin32 +dnl environment. But if we're not, then it compiles a test program +dnl to see if there is a suffix for executables. +AC_DEFUN(AM_EXEEXT, +dnl AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AM_CYGWIN32]) +AC_MSG_CHECKING([for executable suffix]) +[AC_CACHE_VAL(am_cv_exeext, +[if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test*]) +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +AC_MSG_RESULT(${am_cv_exeext}) +AC_SUBST(EXEEXT)]) + diff --git a/sim/common/configure b/sim/common/configure index 024ca83..bf78704 100755 --- a/sim/common/configure +++ b/sim/common/configure @@ -119,8 +119,20 @@ sim_inline="-DDEFAULT_INLINE=0" +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + + + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + + + # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.12.2 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -470,7 +482,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.12.2" exit 0 ;; -with-* | --with-*) @@ -640,9 +652,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -659,7 +673,7 @@ fi # This is intended for use by the target specific directories, and by us. echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:663: checking how to run the C preprocessor" >&5 +echo "configure:677: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -674,14 +688,14 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:684: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -691,14 +705,31 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:701: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -711,6 +742,8 @@ fi rm -f conftest* fi rm -f conftest* +fi +rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" @@ -720,7 +753,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:724: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -747,7 +780,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:751: checking for POSIXized ISC" >&5 +echo "configure:784: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -768,12 +801,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:772: checking for ANSI C header files" >&5 +echo "configure:805: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -781,8 +814,8 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:785: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes @@ -798,7 +831,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -816,7 +849,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -837,7 +870,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -848,7 +881,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -872,12 +905,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:876: checking for working const" >&5 +echo "configure:909: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -947,21 +980,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:951: checking for inline" >&5 +echo "configure:984: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -987,12 +1020,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:991: checking for off_t" >&5 +echo "configure:1024: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1020,12 +1053,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1024: checking for size_t" >&5 +echo "configure:1057: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1055,19 +1088,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1059: checking for working alloca.h" >&5 +echo "configure:1092: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1088,25 +1121,30 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1092: checking for alloca" >&5 +echo "configure:1125: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < +# ifdef _MSC_VER +# include +# define alloca _alloca # else -# ifdef _AIX - #pragma alloca +# if HAVE_ALLOCA_H +# include # else -# ifndef alloca /* predefined by HP cc +Olibcalls */ +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); +# endif # endif # endif # endif @@ -1116,7 +1154,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1141,19 +1179,19 @@ if test $ac_cv_func_alloca_works = no; then # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o + ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1152: checking whether alloca needs Cray hooks" >&5 +echo "configure:1190: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1182: checking for $ac_func" >&5 +echo "configure:1220: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1233,7 +1271,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1237: checking stack direction for C alloca" >&5 +echo "configure:1275: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1241,7 +1279,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1285,18 +1323,18 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1289: checking for $ac_hdr" >&5 +echo "configure:1327: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1299: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -1324,12 +1362,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1328: checking for $ac_func" >&5 +echo "configure:1366: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1377,7 +1415,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1381: checking for working mmap" >&5 +echo "configure:1419: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1385,7 +1423,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1598,7 +1636,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1602: checking host system type" >&5 +echo "configure:1640: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1619,7 +1657,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1623: checking target system type" >&5 +echo "configure:1661: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1637,7 +1675,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1641: checking build system type" >&5 +echo "configure:1679: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1681,14 +1719,14 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1685: checking for $ac_word" >&5 +echo "configure:1723: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -1710,14 +1748,14 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1714: checking for $ac_word" >&5 +echo "configure:1752: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. @@ -1754,25 +1792,58 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1802: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1762: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1792,12 +1863,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1796: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1801: checking whether we are using GNU C" >&5 +echo "configure:1872: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1877,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1817,11 +1888,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1825: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1836,16 +1911,20 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi # Find a good install program. We prefer a C program (faster), @@ -1860,12 +1939,12 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1864: checking for a BSD compatible install" >&5 +echo "configure:1943: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -1926,14 +2005,14 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1930: checking for $ac_word" >&5 +echo "configure:2009: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -1960,18 +2039,18 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1964: checking for $ac_hdr" >&5 +echo "configure:2043: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2000,12 +2079,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2004: checking for $ac_func" >&5 +echo "configure:2083: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2057,12 +2136,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2061: checking for $ac_func" >&5 +echo "configure:2140: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2119,19 +2198,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2123: checking for LC_MESSAGES" >&5 +echo "configure:2202: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2152,7 +2231,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2156: checking whether NLS is requested" >&5 +echo "configure:2235: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2172,7 +2251,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2176: checking whether included gettext is requested" >&5 +echo "configure:2255: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2191,18 +2270,18 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2195: checking for libintl.h" >&5 +echo "configure:2274: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2205: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2218,19 +2297,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2222: checking for gettext in libc" >&5 +echo "configure:2301: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2246,7 +2325,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2250: checking for bindtextdomain in -lintl" >&5 +echo "configure:2329: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2254,7 +2333,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2281,19 +2360,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2285: checking for gettext in libintl" >&5 +echo "configure:2364: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2321,7 +2400,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2325: checking for $ac_word" >&5 +echo "configure:2404: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2355,12 +2434,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2359: checking for $ac_func" >&5 +echo "configure:2438: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2410,7 +2489,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2414: checking for $ac_word" >&5 +echo "configure:2493: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2422,7 +2501,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2445,7 +2524,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2449: checking for $ac_word" >&5 +echo "configure:2528: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2477,7 +2556,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2517,7 +2596,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2521: checking for $ac_word" >&5 +echo "configure:2600: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2551,7 +2630,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2555: checking for $ac_word" >&5 +echo "configure:2634: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2563,7 +2642,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2586,7 +2665,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2590: checking for $ac_word" >&5 +echo "configure:2669: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2676,7 +2755,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2680: checking for catalogs to be installed" >&5 +echo "configure:2759: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2704,18 +2783,18 @@ echo "configure:2680: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2708: checking for linux/version.h" >&5 +echo "configure:2787: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2783,18 +2862,18 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2787: checking for $ac_hdr" >&5 +echo "configure:2866: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2823,18 +2902,18 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2827: checking for $ac_hdr" >&5 +echo "configure:2906: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2863,18 +2942,18 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2867: checking for $ac_hdr" >&5 +echo "configure:2946: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2902,12 +2981,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_func" >&5 +echo "configure:2985: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2955,6 +3034,102 @@ fi done +# Check for socket libraries +echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 +echo "configure:3040: checking for bind in -lsocket" >&5 +ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + +echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lnsl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + + . ${srcdir}/../../bfd/configure.host @@ -3103,12 +3278,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3107: checking return type of signal handlers" >&5 +echo "configure:3282: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -3125,7 +3300,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3144,6 +3319,30 @@ EOF +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:3324: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test* +fi + +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +echo "$ac_t""${am_cv_exeext}" 1>&6 + sim_link_files= sim_link_links= @@ -3198,18 +3397,18 @@ for ac_hdr in stdlib.h string.h strings.h time.h sys/times.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3202: checking for $ac_hdr" >&5 +echo "configure:3401: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:3411: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -3325,7 +3524,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3354,8 +3553,8 @@ s%@sim_hostendian@%$sim_hostendian%g s%@sim_float@%$sim_float%g s%@sim_scache@%$sim_scache%g s%@sim_default_model@%$sim_default_model%g -s%@sim_hardware@%$sim_hardware%g -s%@sim_hw_obj@%$sim_hw_obj%g +s%@sim_hw_cflags@%$sim_hw_cflags%g +s%@sim_hw_objs@%$sim_hw_objs%g s%@sim_hw@%$sim_hw%g s%@sim_inline@%$sim_inline%g s%@sim_packages@%$sim_packages%g @@ -3364,7 +3563,7 @@ s%@sim_reserved_bits@%$sim_reserved_bits%g s%@sim_smp@%$sim_smp%g s%@sim_stdcall@%$sim_stdcall%g s%@sim_xor_endian@%$sim_xor_endian%g -s%@sim_warnings@%$sim_warnings%g +s%@build_warnings@%$build_warnings%g s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g @@ -3439,6 +3638,7 @@ s%@sim_debug@%$sim_debug%g s%@sim_stdio@%$sim_stdio%g s%@sim_trace@%$sim_trace%g s%@sim_profile@%$sim_profile%g +s%@EXEEXT@%$EXEEXT%g s%@CPP_FOR_TARGET@%$CPP_FOR_TARGET%g s%@TARGET_SUBDIR@%$TARGET_SUBDIR%g diff --git a/sim/mips/configure b/sim/mips/configure index 19f1a11..a26b818 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -168,7 +168,7 @@ ac_help="$ac_help ac_help="$ac_help --enable-sim-hostendian=end Specify host byte endian orientation." ac_help="$ac_help - --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings" + --enable-build-warnings[=LIST] Enable build-time compiler warnings" ac_help="$ac_help --enable-sim-endian=endian Specify target byte endian orientation." ac_help="$ac_help @@ -3601,19 +3601,24 @@ fi fi -# Check whether --enable-sim-warnings or --disable-sim-warnings was given. -if test "${enable_sim_warnings+set}" = set; then - enableval="$enable_sim_warnings" - case "${enableval}" in - yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; - no) sim_warnings="-w";; - *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations" +case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac -if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then - echo "Setting warning flags = $sim_warnings" 6>&1 +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 fi else - sim_warnings="" + build_warnings="" fi @@ -4102,7 +4107,7 @@ esac # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:4106: checking for X" >&5 +echo "configure:4111: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -4164,12 +4169,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4238,14 +4243,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -4359,7 +4364,7 @@ then # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:4363: checking for X" >&5 +echo "configure:4368: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -4421,12 +4426,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4435: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4495,14 +4500,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -4592,12 +4597,12 @@ fi if test "$no_x" = ""; then if test "$x_includes" = ""; then cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4606: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -4617,15 +4622,15 @@ rm -f conftest* fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then echo $ac_n "checking for X11 header files""... $ac_c" 1>&6 -echo "configure:4621: checking for X11 header files" >&5 +echo "configure:4626: checking for X11 header files" >&5 XINCLUDES="# no special path needed" cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4629: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -4661,7 +4666,7 @@ rm -f conftest* if test "$no_x" = yes; then echo $ac_n "checking for X11 libraries""... $ac_c" 1>&6 -echo "configure:4665: checking for X11 libraries" >&5 +echo "configure:4670: checking for X11 libraries" >&5 XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/lib/X11 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do @@ -4681,7 +4686,7 @@ echo "configure:4665: checking for X11 libraries" >&5 fi if test "$XLIBSW" = nope ; then echo $ac_n "checking for XCreateWindow in -lXwindow""... $ac_c" 1>&6 -echo "configure:4685: checking for XCreateWindow in -lXwindow" >&5 +echo "configure:4690: checking for XCreateWindow in -lXwindow" >&5 ac_lib_var=`echo Xwindow'_'XCreateWindow | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4689,7 +4694,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lXwindow $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4816,7 +4821,7 @@ fi #-------------------------------------------------------------------- echo $ac_n "checking for main in -lXbsd""... $ac_c" 1>&6 -echo "configure:4820: checking for main in -lXbsd" >&5 +echo "configure:4825: checking for main in -lXbsd" >&5 ac_lib_var=`echo Xbsd'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4824,14 +4829,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lXbsd $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4855,7 +4860,7 @@ fi # CYGNUS LOCAL: Store any socket library(ies) in the cache, and don't # mess up the cache values of the functions we check for. echo $ac_n "checking for socket libraries""... $ac_c" 1>&6 -echo "configure:4859: checking for socket libraries" >&5 +echo "configure:4864: checking for socket libraries" >&5 if eval "test \"`echo '$''{'sim_cv_lib_sockets'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4863,12 +4868,12 @@ else sim_checkBoth=0 unset ac_cv_func_connect echo $ac_n "checking for connect""... $ac_c" 1>&6 -echo "configure:4867: checking for connect" >&5 +echo "configure:4872: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_connect=yes" else @@ -4914,7 +4919,7 @@ fi if test "$sim_checkSocket" = 1; then unset ac_cv_func_connect echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6 -echo "configure:4918: checking for main in -lsocket" >&5 +echo "configure:4923: checking for main in -lsocket" >&5 ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4922,14 +4927,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4956,12 +4961,12 @@ fi SOCKLIBSW="$SOCKLIBSW -lsocket -lnsl" unset ac_cv_func_accept echo $ac_n "checking for accept""... $ac_c" 1>&6 -echo "configure:4960: checking for accept" >&5 +echo "configure:4965: checking for accept" >&5 if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_accept=yes" else @@ -5011,12 +5016,12 @@ fi sim_oldLibs=$SOCKLIBSW SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets" echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 -echo "configure:5015: checking for gethostbyname" >&5 +echo "configure:5020: checking for gethostbyname" >&5 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5048: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_gethostbyname=yes" else @@ -5057,7 +5062,7 @@ if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then else echo "$ac_t""no" 1>&6 echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6 -echo "configure:5061: checking for main in -lnsl" >&5 +echo "configure:5066: checking for main in -lnsl" >&5 ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5065,14 +5070,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5132,17 +5137,17 @@ for ac_hdr in string.h strings.h stdlib.h stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:5136: checking for $ac_hdr" >&5 +echo "configure:5141: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5169,7 +5174,7 @@ fi done echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6 -echo "configure:5173: checking for fabs in -lm" >&5 +echo "configure:5178: checking for fabs in -lm" >&5 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5177,7 +5182,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5218,12 +5223,12 @@ fi for ac_func in aint anint sqrt do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5222: checking for $ac_func" >&5 +echo "configure:5227: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5402,7 +5407,7 @@ s%@sim_reserved_bits@%$sim_reserved_bits%g s%@sim_smp@%$sim_smp%g s%@sim_stdcall@%$sim_stdcall%g s%@sim_xor_endian@%$sim_xor_endian%g -s%@sim_warnings@%$sim_warnings%g +s%@build_warnings@%$build_warnings%g s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g diff --git a/sim/testsuite/configure b/sim/testsuite/configure new file mode 100755 index 0000000..ce8fb1a --- /dev/null +++ b/sim/testsuite/configure @@ -0,0 +1,1062 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.12.2 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.12.2" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=common/bits-tst.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +CC=${CC-cc} + +ac_aux_dir= +for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:575: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:596: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:614: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + + +# Directories to use in all configurations. +configdirs="" + +# add test sub-directory for appropriate targets +testdir=`echo ${target} | sed -e 's/-.*-/-/'` +if test -r ${srcdir}/${testdir}/configure ; then + configdirs="${configdirs} $testdir" +fi + +# add any extra subdirectories +case $target in + # start-sanitize-sky + mips64r5900-sky-elf) configdirs="${configdirs}" ;; + # end-sanitize-sky + *) ;; +esac + +case $target in + m32r-*-*) use_cgen=yes ;; + *) use_cgen=no ;; +esac +if test $use_cgen = yes ; then + # Extract the first word of "guile", so it can be a program name with args. +set dummy guile; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:662: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_SCHEME'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$SCHEME"; then + ac_cv_prog_SCHEME="$SCHEME" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_SCHEME="guile" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_SCHEME" && ac_cv_prog_SCHEME="guile" +fi +fi +SCHEME="$ac_cv_prog_SCHEME" +if test -n "$SCHEME"; then + echo "$ac_t""$SCHEME" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +fi + +# Compute the target architecture. +# FIXME: Will need to canonicalize some values. +# FIXME: Should be in generally accessable place. +case $target in + *) arch=${target_cpu} ;; +esac + + +# configure the subdirectories too +subdirs="$configdirs" + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set) 2>&1 | grep ac_space` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@CC@%$CC%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@SCHEME@%$SCHEME%g +s%@arch@%$arch%g +s%@subdirs@%$subdirs%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + +if test "$no_recursion" != yes; then + + # Remove --cache-file and --srcdir arguments so they do not pile up. + ac_sub_configure_args= + ac_prev= + for ac_arg in $ac_configure_args; do + if test -n "$ac_prev"; then + ac_prev= + continue + fi + case "$ac_arg" in + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + ;; + *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;; + esac + done + + for ac_config_dir in $configdirs; do + + # Do not complain, so a configure script can configure whichever + # parts of a large source tree are present. + if test ! -d $srcdir/$ac_config_dir; then + continue + fi + + echo configuring in $ac_config_dir + + case "$srcdir" in + .) ;; + *) + if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :; + else + { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; } + fi + ;; + esac + + ac_popdir=`pwd` + cd $ac_config_dir + + # A "../" for each directory in /$ac_config_dir. + ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'` + + case "$srcdir" in + .) # No --srcdir option. We are building in place. + ac_sub_srcdir=$srcdir ;; + /*) # Absolute path. + ac_sub_srcdir=$srcdir/$ac_config_dir ;; + *) # Relative path. + ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;; + esac + + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_sub_srcdir/configure; then + ac_sub_configure=$ac_sub_srcdir/configure + elif test -f $ac_sub_srcdir/configure.in; then + ac_sub_configure=$ac_configure + else + echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2 + ac_sub_configure= + fi + + # The recursion is here. + if test -n "$ac_sub_configure"; then + + # Make the cache file name correct relative to the subdirectory. + case "$cache_file" in + /*) ac_sub_cache_file=$cache_file ;; + *) # Relative path. + ac_sub_cache_file="$ac_dots$cache_file" ;; + esac + + echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir" + # The eval makes quoting arguments work. + if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir + then : + else + { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; } + fi + fi + + cd $ac_popdir + done +fi + diff --git a/sim/tic80/configure b/sim/tic80/configure index b1a6104..c8ee6d3 100755 --- a/sim/tic80/configure +++ b/sim/tic80/configure @@ -133,7 +133,7 @@ sim_inline="-DDEFAULT_INLINE=0" # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.12.2 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -170,7 +170,7 @@ ac_help="$ac_help ac_help="$ac_help --enable-sim-hostendian=end Specify host byte endian orientation." ac_help="$ac_help - --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings" + --enable-build-warnings[=LIST] Enable build-time compiler warnings" ac_help="$ac_help --enable-sim-reserved-bits Specify whether to check reserved bits in instruction." ac_help="$ac_help @@ -497,7 +497,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.12.2" exit 0 ;; -with-* | --with-*) @@ -667,9 +667,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -685,7 +687,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:689: checking how to run the C preprocessor" >&5 +echo "configure:691: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -700,14 +702,14 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -717,14 +719,31 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:727: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:729: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:746: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -737,6 +756,8 @@ fi rm -f conftest* fi rm -f conftest* +fi +rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" @@ -746,7 +767,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:750: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:771: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -773,7 +794,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:777: checking for POSIXized ISC" >&5 +echo "configure:798: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -794,12 +815,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:798: checking for ANSI C header files" >&5 +echo "configure:819: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -807,8 +828,8 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes @@ -824,7 +845,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -842,7 +863,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -863,7 +884,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -874,7 +895,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -898,12 +919,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:902: checking for working const" >&5 +echo "configure:923: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:977: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -973,21 +994,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:977: checking for inline" >&5 +echo "configure:998: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1012: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1013,12 +1034,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1017: checking for off_t" >&5 +echo "configure:1038: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1046,12 +1067,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1050: checking for size_t" >&5 +echo "configure:1071: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1081,19 +1102,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1085: checking for working alloca.h" >&5 +echo "configure:1106: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1114,25 +1135,30 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1118: checking for alloca" >&5 +echo "configure:1139: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < +# ifdef _MSC_VER +# include +# define alloca _alloca # else -# ifdef _AIX - #pragma alloca +# if HAVE_ALLOCA_H +# include # else -# ifndef alloca /* predefined by HP cc +Olibcalls */ +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); +# endif # endif # endif # endif @@ -1142,7 +1168,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1167,19 +1193,19 @@ if test $ac_cv_func_alloca_works = no; then # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o + ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1178: checking whether alloca needs Cray hooks" >&5 +echo "configure:1204: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1208: checking for $ac_func" >&5 +echo "configure:1234: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1259,7 +1285,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1263: checking stack direction for C alloca" >&5 +echo "configure:1289: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1267,7 +1293,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1311,18 +1337,18 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1315: checking for $ac_hdr" >&5 +echo "configure:1341: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -1350,12 +1376,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1354: checking for $ac_func" >&5 +echo "configure:1380: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1403,7 +1429,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1407: checking for working mmap" >&5 +echo "configure:1433: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1411,7 +1437,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1624,7 +1650,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1628: checking host system type" >&5 +echo "configure:1654: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1645,7 +1671,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1649: checking target system type" >&5 +echo "configure:1675: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1663,7 +1689,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1667: checking build system type" >&5 +echo "configure:1693: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1707,14 +1733,14 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1711: checking for $ac_word" >&5 +echo "configure:1737: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -1736,14 +1762,14 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1740: checking for $ac_word" >&5 +echo "configure:1766: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. @@ -1780,25 +1806,58 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1816: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1788: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1847: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1818,12 +1877,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1822: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1881: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1827: checking whether we are using GNU C" >&5 +echo "configure:1886: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1832,7 +1891,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1843,11 +1902,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1851: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1914: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1862,16 +1925,20 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi # Find a good install program. We prefer a C program (faster), @@ -1886,12 +1953,12 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1890: checking for a BSD compatible install" >&5 +echo "configure:1957: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -1952,14 +2019,14 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1956: checking for $ac_word" >&5 +echo "configure:2023: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -1986,18 +2053,18 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1990: checking for $ac_hdr" >&5 +echo "configure:2057: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2026,12 +2093,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2030: checking for $ac_func" >&5 +echo "configure:2097: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2083,12 +2150,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2087: checking for $ac_func" >&5 +echo "configure:2154: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2145,19 +2212,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2149: checking for LC_MESSAGES" >&5 +echo "configure:2216: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2178,7 +2245,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2182: checking whether NLS is requested" >&5 +echo "configure:2249: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2198,7 +2265,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2202: checking whether included gettext is requested" >&5 +echo "configure:2269: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2217,18 +2284,18 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2221: checking for libintl.h" >&5 +echo "configure:2288: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2231: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2298: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2244,19 +2311,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2248: checking for gettext in libc" >&5 +echo "configure:2315: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2272,7 +2339,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2276: checking for bindtextdomain in -lintl" >&5 +echo "configure:2343: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2280,7 +2347,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2307,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2311: checking for gettext in libintl" >&5 +echo "configure:2378: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2347,7 +2414,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2351: checking for $ac_word" >&5 +echo "configure:2418: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2381,12 +2448,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2385: checking for $ac_func" >&5 +echo "configure:2452: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2436,7 +2503,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2440: checking for $ac_word" >&5 +echo "configure:2507: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2448,7 +2515,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2471,7 +2538,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2475: checking for $ac_word" >&5 +echo "configure:2542: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2503,7 +2570,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2543,7 +2610,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2547: checking for $ac_word" >&5 +echo "configure:2614: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2577,7 +2644,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2581: checking for $ac_word" >&5 +echo "configure:2648: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2589,7 +2656,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2612,7 +2679,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2616: checking for $ac_word" >&5 +echo "configure:2683: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2702,7 +2769,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2706: checking for catalogs to be installed" >&5 +echo "configure:2773: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2730,18 +2797,18 @@ echo "configure:2706: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2734: checking for linux/version.h" >&5 +echo "configure:2801: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2744: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2809,18 +2876,18 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2813: checking for $ac_hdr" >&5 +echo "configure:2880: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2823: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2849,18 +2916,18 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2853: checking for $ac_hdr" >&5 +echo "configure:2920: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2863: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2889,18 +2956,18 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2893: checking for $ac_hdr" >&5 +echo "configure:2960: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2928,12 +2995,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2932: checking for $ac_func" >&5 +echo "configure:2999: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2981,6 +3048,102 @@ fi done +# Check for socket libraries +echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 +echo "configure:3054: checking for bind in -lsocket" >&5 +ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + +echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +echo "configure:3101: checking for gethostbyname in -lnsl" >&5 +ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lnsl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <&6 +fi + + . ${srcdir}/../../bfd/configure.host @@ -3129,12 +3292,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3133: checking return type of signal handlers" >&5 +echo "configure:3296: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -3151,7 +3314,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3318: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3171,7 +3334,7 @@ EOF echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3175: checking for executable suffix" >&5 +echo "configure:3338: checking for executable suffix" >&5 if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3370,14 +3533,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3374: checking whether byte ordering is bigendian" >&5 +echo "configure:3537: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include @@ -3388,11 +3551,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3392: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3555: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include @@ -3403,7 +3566,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3407: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3423,7 +3586,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3470,19 +3633,24 @@ fi fi -# Check whether --enable-sim-warnings or --disable-sim-warnings was given. -if test "${enable_sim_warnings+set}" = set; then - enableval="$enable_sim_warnings" - case "${enableval}" in - yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; - no) sim_warnings="-w";; - *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations" +case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac -if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then - echo "Setting warning flags = $sim_warnings" 6>&1 +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 fi else - sim_warnings="" + build_warnings="" fi @@ -3567,18 +3735,18 @@ for ac_hdr in stdlib.h unistd.h string.h strings.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3571: checking for $ac_hdr" >&5 +echo "configure:3739: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:3749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -3606,12 +3774,12 @@ done for ac_func in getpid kill do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3610: checking for $ac_func" >&5 +echo "configure:3778: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3751,7 +3919,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3790,7 +3958,7 @@ s%@sim_reserved_bits@%$sim_reserved_bits%g s%@sim_smp@%$sim_smp%g s%@sim_stdcall@%$sim_stdcall%g s%@sim_xor_endian@%$sim_xor_endian%g -s%@sim_warnings@%$sim_warnings%g +s%@build_warnings@%$build_warnings%g s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g diff --git a/sim/w65/configure b/sim/w65/configure index 6cc31aa..0ddd01d 100755 --- a/sim/w65/configure +++ b/sim/w65/configure @@ -133,7 +133,7 @@ sim_inline="-DDEFAULT_INLINE=0" # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.12.2 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -469,7 +469,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.12.2" exit 0 ;; -with-* | --with-*) @@ -639,9 +639,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -705,7 +707,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:709: checking host system type" >&5 +echo "configure:711: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -726,7 +728,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:730: checking target system type" >&5 +echo "configure:732: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -744,7 +746,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:748: checking build system type" >&5 +echo "configure:750: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -788,14 +790,14 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:792: checking for $ac_word" >&5 +echo "configure:794: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -817,14 +819,14 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:821: checking for $ac_word" >&5 +echo "configure:823: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. @@ -861,25 +863,58 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:873: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:869: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:904: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -899,12 +934,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:903: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:908: checking whether we are using GNU C" >&5 +echo "configure:943: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -913,7 +948,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:952: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -924,11 +959,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:932: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:971: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -943,16 +982,20 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi # Find a good install program. We prefer a C program (faster), @@ -967,12 +1010,12 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:971: checking for a BSD compatible install" >&5 +echo "configure:1014: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -1027,14 +1070,14 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1031: checking for $ac_word" >&5 +echo "configure:1074: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -1064,7 +1107,7 @@ fi ALL_LINGUAS= echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1068: checking how to run the C preprocessor" >&5 +echo "configure:1111: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1079,14 +1122,14 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -1096,14 +1139,31 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1106: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -1116,6 +1176,8 @@ fi rm -f conftest* fi rm -f conftest* +fi +rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" @@ -1125,7 +1187,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1129: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1191: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1152,7 +1214,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:1156: checking for POSIXized ISC" >&5 +echo "configure:1218: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -1173,12 +1235,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1177: checking for ANSI C header files" >&5 +echo "configure:1239: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1186,8 +1248,8 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes @@ -1203,7 +1265,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1221,7 +1283,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1242,7 +1304,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1253,7 +1315,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1277,12 +1339,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1281: checking for working const" >&5 +echo "configure:1343: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1352,21 +1414,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1356: checking for inline" >&5 +echo "configure:1418: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1392,12 +1454,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1396: checking for off_t" >&5 +echo "configure:1458: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1425,12 +1487,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1429: checking for size_t" >&5 +echo "configure:1491: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1460,19 +1522,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1464: checking for working alloca.h" >&5 +echo "configure:1526: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1493,25 +1555,30 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1497: checking for alloca" >&5 +echo "configure:1559: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < +# ifdef _MSC_VER +# include +# define alloca _alloca # else -# ifdef _AIX - #pragma alloca +# if HAVE_ALLOCA_H +# include # else -# ifndef alloca /* predefined by HP cc +Olibcalls */ +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); +# endif # endif # endif # endif @@ -1521,7 +1588,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1546,19 +1613,19 @@ if test $ac_cv_func_alloca_works = no; then # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o + ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1557: checking whether alloca needs Cray hooks" >&5 +echo "configure:1624: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1587: checking for $ac_func" >&5 +echo "configure:1654: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1638,7 +1705,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1642: checking stack direction for C alloca" >&5 +echo "configure:1709: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1646,7 +1713,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1690,18 +1757,18 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1694: checking for $ac_hdr" >&5 +echo "configure:1761: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1704: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:1771: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -1729,12 +1796,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1733: checking for $ac_func" >&5 +echo "configure:1800: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1782,7 +1849,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1786: checking for working mmap" >&5 +echo "configure:1853: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1790,7 +1857,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1958,18 +2025,18 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1962: checking for $ac_hdr" >&5 +echo "configure:2029: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1972: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2039: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -1998,12 +2065,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2002: checking for $ac_func" >&5 +echo "configure:2069: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2055,12 +2122,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2059: checking for $ac_func" >&5 +echo "configure:2126: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2117,19 +2184,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2121: checking for LC_MESSAGES" >&5 +echo "configure:2188: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2150,7 +2217,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2154: checking whether NLS is requested" >&5 +echo "configure:2221: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2170,7 +2237,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2174: checking whether included gettext is requested" >&5 +echo "configure:2241: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2189,18 +2256,18 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2193: checking for libintl.h" >&5 +echo "configure:2260: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2270: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2216,19 +2283,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2220: checking for gettext in libc" >&5 +echo "configure:2287: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2244,7 +2311,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2248: checking for bindtextdomain in -lintl" >&5 +echo "configure:2315: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2252,7 +2319,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2279,19 +2346,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2283: checking for gettext in libintl" >&5 +echo "configure:2350: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2319,7 +2386,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2323: checking for $ac_word" >&5 +echo "configure:2390: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2353,12 +2420,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2357: checking for $ac_func" >&5 +echo "configure:2424: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2452: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2408,7 +2475,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2412: checking for $ac_word" >&5 +echo "configure:2479: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2420,7 +2487,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2443,7 +2510,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2447: checking for $ac_word" >&5 +echo "configure:2514: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2475,7 +2542,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2515,7 +2582,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2519: checking for $ac_word" >&5 +echo "configure:2586: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2549,7 +2616,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2553: checking for $ac_word" >&5 +echo "configure:2620: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2561,7 +2628,7 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then @@ -2584,7 +2651,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2588: checking for $ac_word" >&5 +echo "configure:2655: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2674,7 +2741,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2678: checking for catalogs to be installed" >&5 +echo "configure:2745: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2702,18 +2769,18 @@ echo "configure:2678: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2706: checking for linux/version.h" >&5 +echo "configure:2773: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2783: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2778,18 +2845,18 @@ for ac_hdr in stdlib.h time.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2782: checking for $ac_hdr" >&5 +echo "configure:2849: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2816,19 +2883,19 @@ done echo $ac_n "checking whether printf must be declared""... $ac_c" 1>&6 -echo "configure:2820: checking whether printf must be declared" >&5 +echo "configure:2887: checking whether printf must be declared" >&5 if eval "test \"`echo '$''{'sim_cv_decl_needed_printf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { int (*pfn) = (int (*)) printf ; return 0; } EOF -if { (eval echo configure:2832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* sim_cv_decl_needed_printf=no else @@ -2938,7 +3005,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -2977,7 +3044,7 @@ s%@sim_reserved_bits@%$sim_reserved_bits%g s%@sim_smp@%$sim_smp%g s%@sim_stdcall@%$sim_stdcall%g s%@sim_xor_endian@%$sim_xor_endian%g -s%@sim_warnings@%$sim_warnings%g +s%@build_warnings@%$build_warnings%g s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g