From: Badhri Jagan Sridharan Date: Mon, 28 Aug 2017 17:23:20 +0000 (-0700) Subject: staging: typec: tcpm: typec: tcpm: Wait for CC debounce before PD excg X-Git-Tag: v4.14-rc1~148^2~59 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b965b6317ff147d379c7a60c852f6027a724634f;p=platform%2Fkernel%2Flinux-rpi.git staging: typec: tcpm: typec: tcpm: Wait for CC debounce before PD excg Once, Rp or Rd is switched, wait for PD_T_CC_DEBOUNCE. If not the PS_RDY message transmitted might result in failure. Also, Only wait for PD_T_SRCSWAPSTDBY while in PR_SWAP_SRC_SNK_TRANSITION_OFF. PD_T_PS_SOURCE_OFF is the overall time after which the initial sink would issue hard reset. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/typec/pd.h b/drivers/staging/typec/pd.h index 510ef72..30b32ad 100644 --- a/drivers/staging/typec/pd.h +++ b/drivers/staging/typec/pd.h @@ -278,6 +278,8 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_VCONN_SOURCE_ON 100 #define PD_T_SINK_REQUEST 100 /* 100 ms minimum */ #define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */ +#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */ +#define PD_T_NEWSRC 250 /* Maximum of 275ms */ #define PD_T_DRP_TRY 100 /* 75 - 150 ms */ #define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c index fa2e59b..36a70989 100644 --- a/drivers/staging/typec/tcpm.c +++ b/drivers/staging/typec/tcpm.c @@ -90,9 +90,11 @@ S(PR_SWAP_START), \ S(PR_SWAP_SRC_SNK_TRANSITION_OFF), \ S(PR_SWAP_SRC_SNK_SOURCE_OFF), \ + S(PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED), \ S(PR_SWAP_SRC_SNK_SINK_ON), \ S(PR_SWAP_SNK_SRC_SINK_OFF), \ S(PR_SWAP_SNK_SRC_SOURCE_ON), \ + S(PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP), \ \ S(VCONN_SWAP_ACCEPT), \ S(VCONN_SWAP_SEND), \ @@ -1400,7 +1402,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, SNK_TRANSITION_SINK_VBUS, 0); } break; - case PR_SWAP_SRC_SNK_SOURCE_OFF: + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: tcpm_set_state(port, PR_SWAP_SRC_SNK_SINK_ON, 0); break; case PR_SWAP_SNK_SRC_SINK_OFF: @@ -2684,11 +2686,17 @@ static void run_state_machine(struct tcpm_port *port) case PR_SWAP_SRC_SNK_TRANSITION_OFF: tcpm_set_vbus(port, false); port->explicit_contract = false; + /* allow time for Vbus discharge, must be < tSrcSwapStdby */ tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF, - PD_T_PS_SOURCE_OFF); + PD_T_SRCSWAPSTDBY); break; case PR_SWAP_SRC_SNK_SOURCE_OFF: tcpm_set_cc(port, TYPEC_CC_RD); + /* allow CC debounce */ + tcpm_set_state(port, PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED, + PD_T_CC_DEBOUNCE); + break; + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: /* * USB-PD standard, 6.2.1.4, Port Power Role: * "During the Power Role Swap Sequence, for the initial Source @@ -2715,6 +2723,15 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_cc(port, tcpm_rp_cc(port)); tcpm_set_vbus(port, true); /* + * allow time VBUS ramp-up, must be < tNewSrc + * Also, this window overlaps with CC debounce as well. + * So, Wait for the max of two which is PD_T_NEWSRC + */ + tcpm_set_state(port, PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP, + PD_T_NEWSRC); + break; + case PR_SWAP_SNK_SRC_SOURCE_ON_VBUS_RAMPED_UP: + /* * USB PD standard, 6.2.1.4: * "Subsequent Messages initiated by the Policy Engine, * such as the PS_RDY Message sent to indicate that Vbus @@ -2984,8 +3001,10 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, case PR_SWAP_SNK_SRC_SINK_OFF: case PR_SWAP_SRC_SNK_TRANSITION_OFF: case PR_SWAP_SRC_SNK_SOURCE_OFF: + case PR_SWAP_SRC_SNK_SOURCE_OFF_CC_DEBOUNCED: + case PR_SWAP_SNK_SRC_SOURCE_ON: /* - * CC state change is expected here; we just turned off power. + * CC state change is expected in PR_SWAP * Ignore it. */ break;