From: Harry Pan Date: Wed, 28 Nov 2018 16:40:41 +0000 (+0800) Subject: usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device X-Git-Tag: v3.18.129~13 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b8d5012991fb9770848de292a48498a9db3aeed1;p=profile%2Fwearable%2Fplatform%2Fkernel%2Flinux-3.18-exynos7270.git usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device commit 2f2dde6ba89b1ef1fe23c1138131b315d9aa4019 upstream. Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by: Harry Pan Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index c52ffc6..e480cf3 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -177,6 +177,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Midiman M-Audio Keystation 88es */ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* SanDisk Ultra Fit and Ultra Flair */ + { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },