From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 27 Aug 2020 13:43:48 +0000 (+0200)
Subject: ti: common: Remove additional i2c read for board detection
X-Git-Tag: v2020.10~39^2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b892b6d1e0afef8d47f256d5b3ca4687bed1bee3;p=platform%2Fkernel%2Fu-boot.git

ti: common: Remove additional i2c read for board detection

There shouldn't be a need to call additional i2c read if above failed
already. Based on comment it should be enough to try to detect legacy
boards which are mentioned in the comment.

Fixes: 2463f6728e82 ("ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT")
Fixes: 0bea813d0018 ("ARM: omap-common: Add standard access for board description EEPROM")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index e09ecda..8b3b4bc 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -113,18 +113,15 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 
 	/* Corrupted data??? */
 	if (hdr_read != header) {
-		rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 1 byte address (some legacy boards need this..)
 		 */
-		if (rc) {
-			rc =  i2c_set_chip_offset_len(dev, 1);
-			if (rc)
-				return rc;
+		rc = i2c_set_chip_offset_len(dev, 1);
+		if (rc)
+			return rc;
 
-			rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
-		}
+		rc = dm_i2c_read(dev, 0, (uint8_t *)&hdr_read, 4);
 		if (rc)
 			return rc;
 	}
@@ -153,16 +150,13 @@ static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
 
 	/* Corrupted data??? */
 	if (hdr_read != header) {
-		rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
 		/*
 		 * read the eeprom header using i2c again, but use only a
 		 * 1 byte address (some legacy boards need this..)
 		 */
 		byte = 1;
-		if (rc) {
-			rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
-				      4);
-		}
+		rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
+			      4);
 		if (rc)
 			return rc;
 	}