From: Yao Qi <yao@codesourcery.com>
Date: Wed, 10 Apr 2013 06:12:01 +0000 (+0000)
Subject: gdb/testsuite/
X-Git-Tag: cygwin-64bit-premerge~141
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b7a273f8c632d5bc5005fb7ece063a5ed0091bc5;p=external%2Fbinutils.git

gdb/testsuite/

	* gdb.trace/actions.exp (check_tracepoint): New.
	(top level): Start the tracing and check the actions of
	tracepoints.  Save trace data to tfile format.  Restart GDB
	and read trace file in tfile target.  Check the actions of
	tracepoints again.
	* gdb.trace/while-stepping.exp: Likewise.
---

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 7017475..574aff8 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,5 +1,14 @@
 2013-04-10  Yao Qi  <yao@codesourcery.com>
 
+	* gdb.trace/actions.exp (check_tracepoint): New.
+	(top level): Start the tracing and check the actions of
+	tracepoints.  Save trace data to tfile format.  Restart GDB
+	and read trace file in tfile target.  Check the actions of
+	tracepoints again.
+	* gdb.trace/while-stepping.exp: Likewise.
+
+2013-04-10  Yao Qi  <yao@codesourcery.com>
+
 	* gdb.trace/report.exp: Use standard_output_file for saved
 	trace file.
 
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
index f8a5266..5fa1b97 100644
--- a/gdb/testsuite/gdb.trace/actions.exp
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -235,3 +235,87 @@ gdb_test "info tracepoints" \
 \[\t \]+not installed on target." \
 		"5.10a: verify teval actions set for two tracepoints"
 
+gdb_test "break main"
+gdb_run_cmd
+gdb_test "" "Breakpoint .*"
+if ![gdb_target_supports_trace] {
+    unsupported "target does not support trace"
+    return -1
+}
+
+gdb_trace_setactions "set actions for first tracepoint" \
+    "$trcpt1" \
+    "collect \$regs" "^$" \
+    "end" ""
+
+# Check the definition of tracepoints.  These tracepoints may have
+# different number in different runs.
+
+proc check_tracepoint { data_source } {
+    with_test_prefix "$data_source" {
+	global gdb_prompt
+	global srcfile
+
+	set tp_on_gdb_c_test 0
+	set tp_on_gdb_asm_test 0
+	set tp_on_gdb_recursion_test 0
+
+	# Since the three tracepoints may appear in different orders, so
+	# we can't do 'info tracepoints' to match the output.  Instead, we
+	# show each tracepoint one by one and record the number of each
+	# tracepoint shown up the output.  Check the number finally.
+	for {set i 1} {$i < 4} {incr i 1} {
+	    set test "info tracepoints $i"
+	    gdb_test_multiple "info tracepoints $i" $test {
+		-re "\[0-9\]+\[\t \]+tracepoint     keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+\\r\\n\[\t \]+collect \\\$regs\\r\\n\[\t \]+installed on target" {
+		    incr tp_on_gdb_c_test
+		    exp_continue
+		}
+		-re "\[0-9\]+\[\t \]+tracepoint     keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+\\r\\n\[\t \]+teval \\\$tsv \\+= 1\\r\\n\[\t \]+installed on target" {
+		    incr tp_on_gdb_asm_test
+		    exp_continue
+		}
+		-re "\[0-9\]+\[\t \]+tracepoint     keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+\\r\\n\[\t \]+collect gdb_long_test\\r\\n\[\t \]+installed on target" {
+		    incr tp_on_gdb_recursion_test
+		    exp_continue
+		}
+		-re "${gdb_prompt} $" {
+		}
+	    }
+	}
+
+	if {$tp_on_gdb_c_test == 1} {
+	    pass "tracepoint on gdb_c_test"
+	} else {
+	    fail "tracepoint on gdb_c_test"
+	}
+	if {$tp_on_gdb_asm_test == 1} {
+	    pass "tracepoint on gdb_asm_test"
+	} else {
+	    fail "tracepoint on gdb_asm_test"
+	}
+	if {$tp_on_gdb_recursion_test == 1} {
+	    pass "tracepoint on gdb_recursion_test"
+	} else {
+	    fail "tracepoint on gdb_recursion_test $tp_on_gdb_recursion_test"
+	}
+    }
+}
+
+# Start and stop the tracing, so that we can save tracepoints
+# definitions to trace file.
+gdb_test_no_output "tstart" ""
+check_tracepoint "live"
+gdb_test_no_output "tstop" ""
+set tracefile [standard_output_file ${testfile}]
+gdb_test "tsave ${tracefile}.tf" \
+    "Trace data saved to file '${tracefile}.tf'\.\\r"
+
+# Restart GDB and read the trace data in tfile target.
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_file_cmd $binfile
+gdb_test "target tfile ${tracefile}.tf" ".*" \
+    "change to tfile target"
+check_tracepoint "tfile"
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
index b80132b..0b823a4 100644
--- a/gdb/testsuite/gdb.trace/while-stepping.exp
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -99,3 +99,49 @@ gdb_test "info tracepoints" \
 .*end.*" \
 	"5.16: confirm actions, step without collecting anything"
 
+gdb_test "break main"
+gdb_run_cmd
+gdb_test "" "Breakpoint .*"
+if ![gdb_target_supports_trace] {
+    unsupported "target does not support trace"
+    return -1
+}
+
+gdb_trace_setactions "set stepcount to $stepcount" \
+	"" \
+	"while-stepping $stepcount" "" \
+	"collect \$regs " "^$" \
+	"collect \$locals " "^$" \
+	"end" ""
+
+proc check_tracepoint { data_source } {
+    with_test_prefix "$data_source" {
+	global srcfile
+	global stepcount
+
+	gdb_test "info tracepoints" \
+	    "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+tracepoint     keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+.
+\[\t \]+while-stepping $stepcount.*
+\[\t \]+collect \\\$regs.*
+\[\t \]+collect \\\$locals.*
+\[\t \]+end.*"
+    }
+}
+
+gdb_test_no_output "tstart"
+check_tracepoint "live"
+gdb_test_no_output "tstop"
+set tracefile [standard_output_file ${testfile}]
+gdb_test "tsave ${tracefile}.tf" \
+    "Trace data saved to file '${tracefile}.tf'\.\\r" \
+    "save tfile trace file"
+
+# Restart GDB and read the trace data in tfile target.
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_file_cmd $binfile
+gdb_test "target tfile ${tracefile}.tf" ".*" \
+    "change to tfile target"
+check_tracepoint "tfile"