From: Nuno Sá Date: Wed, 11 Aug 2021 13:32:20 +0000 (+0200) Subject: iio: ltc2983: fix device probe X-Git-Tag: accepted/tizen/unified/20230118.172025~6524^2~113^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b76d26d69ecc97ebb24aaf40427a13c808a4f488;p=platform%2Fkernel%2Flinux-rpi.git iio: ltc2983: fix device probe There is no reason to assume that the IRQ rising edge (indicating that the device start up phase is done) will happen after we request the IRQ. If the device is already up by the time we request it, the call to 'wait_for_completion_timeout()' will timeout and we will fail the device probe even though there's nothing wrong. Fix it by just polling the status register until we get the indication that the device is up and running. As a side effect of this fix, requesting the IRQ is also moved to after the setup function. Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983") Reported-and-tested-by: Drew Fustini Reviewed-by: Drew Fustini Signed-off-by: Nuno Sá Reviewed-by: Andy Shevchenko Cc: Link: https://lore.kernel.org/r/20210811133220.190264-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index 3b5ba26..3b4a0e6 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -89,6 +89,8 @@ #define LTC2983_STATUS_START_MASK BIT(7) #define LTC2983_STATUS_START(x) FIELD_PREP(LTC2983_STATUS_START_MASK, x) +#define LTC2983_STATUS_UP_MASK GENMASK(7, 6) +#define LTC2983_STATUS_UP(reg) FIELD_GET(LTC2983_STATUS_UP_MASK, reg) #define LTC2983_STATUS_CHAN_SEL_MASK GENMASK(4, 0) #define LTC2983_STATUS_CHAN_SEL(x) \ @@ -1362,17 +1364,16 @@ put_child: static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio) { - u32 iio_chan_t = 0, iio_chan_v = 0, chan, iio_idx = 0; + u32 iio_chan_t = 0, iio_chan_v = 0, chan, iio_idx = 0, status; int ret; - unsigned long time; - - /* make sure the device is up */ - time = wait_for_completion_timeout(&st->completion, - msecs_to_jiffies(250)); - if (!time) { + /* make sure the device is up: start bit (7) is 0 and done bit (6) is 1 */ + ret = regmap_read_poll_timeout(st->regmap, LTC2983_STATUS_REG, status, + LTC2983_STATUS_UP(status) == 1, 25000, + 25000 * 10); + if (ret) { dev_err(&st->spi->dev, "Device startup timed out\n"); - return -ETIMEDOUT; + return ret; } st->iio_chan = devm_kzalloc(&st->spi->dev, @@ -1492,10 +1493,11 @@ static int ltc2983_probe(struct spi_device *spi) ret = ltc2983_parse_dt(st); if (ret) return ret; - /* - * let's request the irq now so it is used to sync the device - * startup in ltc2983_setup() - */ + + ret = ltc2983_setup(st, true); + if (ret) + return ret; + ret = devm_request_irq(&spi->dev, spi->irq, ltc2983_irq_handler, IRQF_TRIGGER_RISING, name, st); if (ret) { @@ -1503,10 +1505,6 @@ static int ltc2983_probe(struct spi_device *spi) return ret; } - ret = ltc2983_setup(st, true); - if (ret) - return ret; - indio_dev->name = name; indio_dev->num_channels = st->iio_channels; indio_dev->channels = st->iio_chan;