From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 24 Oct 2012 16:14:04 +0000 (+0200)
Subject: ehci: Retry to fill the queue while waiting for td completion
X-Git-Tag: TizenStudio_2.0_p2.3.2~208^2~3171^2~28
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b4ea86649915eca5551a5166f76e7a9d9032de50;p=sdk%2Femulator%2Fqemu.git

ehci: Retry to fill the queue while waiting for td completion

If the guest is using multiple transfers to try and keep the usb bus busy /
used at maximum efficiency, currently we would see / do the following:

1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) report transfer 2 completion to guest
5) submit transfer 1 to the device
6) report transfer 1 completion to guest
7) submit transfer 2 to the device
8) report transfer 2 completion to guest
etc.

So after the initial submission we would effectively only have 1 transfer
in flight, rather then 2. This is caused by us not checking the queue for
addition of new transfers by the guest (ie the resubmission of a recently
finished transfer), while waiting for a pending transfer to complete.
This patch does add a check for this, changing the sequence to:

1) submit transfer 1 to the device
2) submit transfer 2 to the device
3) report transfer 1 completion to guest
4) submit transfer 1 to the device
5) report transfer 2 completion to guest
6) submit transfer 2 to the device
etc.

Thus keeping 2 transfers in flight (most of the time, and always 1),
as intended by the guest.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---

diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 8bd87c7..a02fe96 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -381,7 +381,7 @@ struct EHCIQueue {
     uint32_t qhaddr;       /* address QH read from                 */
     uint32_t qtdaddr;      /* address QTD read from                */
     USBDevice *dev;
-    QTAILQ_HEAD(, EHCIPacket) packets;
+    QTAILQ_HEAD(pkts_head, EHCIPacket) packets;
 };
 
 typedef QTAILQ_HEAD(EHCIQueueHead, EHCIQueue) EHCIQueueHead;
@@ -488,6 +488,7 @@ static const char *ehci_mmio_names[] = {
 
 static int ehci_state_executing(EHCIQueue *q);
 static int ehci_state_writeback(EHCIQueue *q);
+static int ehci_fill_queue(EHCIPacket *p);
 
 static const char *nr2str(const char **n, size_t len, uint32_t nr)
 {
@@ -1994,7 +1995,7 @@ static int ehci_state_fetchqtd(EHCIQueue *q)
 {
     EHCIqtd qtd;
     EHCIPacket *p;
-    int again = 0;
+    int again = 1;
 
     get_dwords(q->ehci, NLPTR_GET(q->qtdaddr), (uint32_t *) &qtd,
                sizeof(EHCIqtd) >> 2);
@@ -2022,7 +2023,6 @@ static int ehci_state_fetchqtd(EHCIQueue *q)
             p = NULL;
         }
         ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
-        again = 1;
     } else if (p != NULL) {
         switch (p->async) {
         case EHCI_ASYNC_NONE:
@@ -2031,6 +2031,9 @@ static int ehci_state_fetchqtd(EHCIQueue *q)
             ehci_set_state(q->ehci, q->async, EST_EXECUTE);
             break;
         case EHCI_ASYNC_INFLIGHT:
+            /* Check if the guest has added new tds to the queue */
+            again = (ehci_fill_queue(QTAILQ_LAST(&q->packets, pkts_head)) ==
+                     USB_RET_PROCERR) ? -1 : 1;
             /* Unfinished async handled packet, go horizontal */
             ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
             break;
@@ -2042,13 +2045,11 @@ static int ehci_state_fetchqtd(EHCIQueue *q)
             ehci_set_state(q->ehci, q->async, EST_EXECUTING);
             break;
         }
-        again = 1;
     } else {
         p = ehci_alloc_packet(q);
         p->qtdaddr = q->qtdaddr;
         p->qtd = qtd;
         ehci_set_state(q->ehci, q->async, EST_EXECUTE);
-        again = 1;
     }
 
     return again;