From: Guenter Roeck Date: Wed, 14 May 2014 20:12:49 +0000 (-0700) Subject: net: phy: Don't call phy_resume if phy_init_hw failed X-Git-Tag: v4.9.8~6360^2~31 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b394745df2d9d4c30bf1bcc55773bec6f3bc7c67;p=platform%2Fkernel%2Flinux-rpi3.git net: phy: Don't call phy_resume if phy_init_hw failed After the call to phy_init_hw failed in phy_attach_direct, phy_detach is called to detach the phy device from its network device. If the attached driver is a generic phy driver, this also detaches the driver. Subsequently phy_resume is called, which assumes without checking that a driver is attached to the device. This will result in a crash such as Unable to handle kernel paging request for data at address 0xffffffffffffff90 Faulting instruction address: 0xc0000000003a0e18 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0000000003a0e18] .phy_attach_direct+0x68/0x17c LR [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c Call Trace: [c0000003fc0475d0] [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c (unreliable) [c0000003fc047670] [c0000000003a0ff8] .phy_connect_direct+0x28/0x98 [c0000003fc047700] [c0000000003f0074] .of_phy_connect+0x4c/0xa4 Only call phy_resume if phy_init_hw was successful. Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0ce6066..4987a1c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -614,8 +614,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, err = phy_init_hw(phydev); if (err) phy_detach(phydev); - - phy_resume(phydev); + else + phy_resume(phydev); return err; }