From: Andy Shevchenko Date: Thu, 9 Dec 2021 11:34:56 +0000 (+0200) Subject: pinctrl: Sort Kconfig and Makefile entries alphabetically X-Git-Tag: v6.6.17~8434^2~19 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b124c8bd50c7550ed966c09f69ffdbaaedc0aa15;p=platform%2Fkernel%2Flinux-rpi.git pinctrl: Sort Kconfig and Makefile entries alphabetically Sort Kconfig and Makefile entries alphabetically for better maintenance in the future. While at it fix some style issues, such as: - "Say Y"/"Say yes"/"Say Yes" --> "Say Y" - "pullup/pulldown" --> "pull-up and pull-down" - wrong indentation Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211209113456.33977-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index a3457a4..c27c9ee 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -31,6 +31,24 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_AMD + tristate "AMD GPIO pin control" + depends on HAS_IOMEM + depends on ACPI || COMPILE_TEST + select GPIOLIB + select GPIOLIB_IRQCHIP + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + The driver for memory mapped GPIO functionality on AMD platforms + (x86 or arm). Most of the pins are usually muxed to some other + functionality by firmware, so only a small amount is available + for GPIO use. + + Requires ACPI/FDT device enumeration code to set up a platform + device. + config PINCTRL_APPLE_GPIO tristate "Apple SoC GPIO pin controller driver" depends on ARCH_APPLE @@ -69,20 +87,6 @@ config PINCTRL_AS3722 open drain configuration for the GPIO pins of AS3722 devices. It also supports the GPIO functionality through gpiolib. -config PINCTRL_AXP209 - tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support" - depends on MFD_AXP20X - depends on OF - select PINMUX - select GENERIC_PINCONF - select GPIOLIB - help - AXP PMICs provides multiple GPIOs that can be muxed for different - functions. This driver bundles a pinctrl driver to select the function - muxing and a GPIO driver to handle the GPIO when the GPIO function is - selected. - Say yes to enable pinctrl and GPIO support for the AXP209 PMIC - config PINCTRL_AT91 bool "AT91 pinctrl driver" depends on OF @@ -109,23 +113,19 @@ config PINCTRL_AT91PIO4 Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4 controller available on sama5d2 SoC. -config PINCTRL_AMD - tristate "AMD GPIO pin control" - depends on HAS_IOMEM - depends on ACPI || COMPILE_TEST - select GPIOLIB - select GPIOLIB_IRQCHIP +config PINCTRL_AXP209 + tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support" + depends on MFD_AXP20X + depends on OF select PINMUX - select PINCONF select GENERIC_PINCONF + select GPIOLIB help - driver for memory mapped GPIO functionality on AMD platforms - (x86 or arm).Most pins are usually muxed to some other - functionality by firmware,so only a small amount is available - for gpio use. - - Requires ACPI/FDT device enumeration code to set up a platform - device. + AXP PMICs provides multiple GPIOs that can be muxed for different + functions. This driver bundles a pinctrl driver to select the function + muxing and a GPIO driver to handle the GPIO when the GPIO function is + selected. + Say Y to enable pinctrl and GPIO support for the AXP209 PMIC. config PINCTRL_BM1880 bool "Bitmain BM1880 Pinctrl driver" @@ -136,13 +136,13 @@ config PINCTRL_BM1880 Pinctrl driver for Bitmain BM1880 SoC. config PINCTRL_DA850_PUPD - tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups" + tristate "TI DA850/OMAP-L138/AM18XX pull-up and pull-down groups" depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST) select PINCONF select GENERIC_PINCONF help Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control - pullup/pulldown pin groups. + pull-up and pull-down pin groups. config PINCTRL_DA9062 tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support" @@ -154,7 +154,7 @@ config PINCTRL_DA9062 function muxing and a GPIO driver to handle the GPIO when the GPIO function is selected. - Say yes to enable pinctrl and GPIO support for the DA9062 PMIC. + Say Y to enable pinctrl and GPIO support for the DA9062 PMIC. config PINCTRL_DIGICOLOR bool @@ -162,12 +162,93 @@ config PINCTRL_DIGICOLOR select PINMUX select GENERIC_PINCONF +config PINCTRL_EQUILIBRIUM + tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC" + depends on OF && HAS_IOMEM + depends on X86 || COMPILE_TEST + select PINMUX + select PINCONF + select GPIOLIB + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + help + Equilibrium driver is a pinctrl and GPIO driver for Intel Lightning + Mountain network processor SoC that supports both the GPIO and pin + control frameworks. It provides interfaces to setup pin muxing, assign + desired pin functions, configure GPIO attributes for LGM SoC pins. + Pin muxing and pin config settings are retrieved from device tree. + +config PINCTRL_GEMINI + bool + depends on ARCH_GEMINI + default ARCH_GEMINI + select PINMUX + select GENERIC_PINCONF + select MFD_SYSCON + +config PINCTRL_INGENIC + bool "Pinctrl driver for the Ingenic JZ47xx SoCs" + default MACH_INGENIC + depends on OF + depends on MIPS || COMPILE_TEST + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select REGMAP_MMIO + +config PINCTRL_K210 + bool "Pinctrl driver for the Canaan Kendryte K210 SoC" + depends on RISCV && SOC_CANAAN && OF + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO + default SOC_CANAAN + help + Add support for the Canaan Kendryte K210 RISC-V SOC Field + Programmable IO Array (FPIOA) controller. + +config PINCTRL_KEEMBAY + tristate "Pinctrl driver for Intel Keem Bay SoC" + depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) + depends on HAS_IOMEM + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select GPIO_GENERIC + help + This selects pin control driver for the Intel Keem Bay SoC. + It provides pin config functions such as pull-up, pull-down, + interrupt, drive strength, sec lock, Schmitt trigger, slew + rate control and direction control. This module will be + called as pinctrl-keembay. + config PINCTRL_LANTIQ bool depends on LANTIQ select PINMUX select PINCONF +config PINCTRL_FALCON + bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ + +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + config PINCTRL_LPC18XX bool "NXP LPC18XX/43XX SCU pinctrl driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) @@ -177,18 +258,16 @@ config PINCTRL_LPC18XX help Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). -config PINCTRL_FALCON - bool - depends on SOC_FALCON - depends on PINCTRL_LANTIQ - -config PINCTRL_GEMINI - bool - depends on ARCH_GEMINI - default ARCH_GEMINI +config PINCTRL_MAX77620 + tristate "MAX77620/MAX20024 Pincontrol support" + depends on MFD_MAX77620 && OF select PINMUX select GENERIC_PINCONF - select MFD_SYSCON + help + Say Y here to enable Pin control support for Maxim MAX77620 PMIC. + This PMIC has 8 GPIO pins that work as GPIO as well as special + function in alternate mode. This driver also configure push-pull, + open drain, FPS slots etc. config PINCTRL_MCP23S08_I2C tristate @@ -212,99 +291,47 @@ config PINCTRL_MCP23S08 This provides a GPIO interface supporting inputs and outputs and a corresponding interrupt-controller. -config PINCTRL_OXNAS - bool +config PINCTRL_MICROCHIP_SGPIO + bool "Pinctrl driver for Microsemi/Microchip Serial GPIO" depends on OF - select PINMUX - select PINCONF - select GENERIC_PINCONF + depends on HAS_IOMEM select GPIOLIB - select OF_GPIO select GPIOLIB_IRQCHIP - select MFD_SYSCON - -config PINCTRL_ROCKCHIP - tristate "Rockchip gpio and pinctrl driver" - depends on ARCH_ROCKCHIP || COMPILE_TEST - depends on OF - select GPIOLIB - select PINMUX select GENERIC_PINCONF - select GENERIC_IRQ_CHIP - select MFD_SYSCON + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS select OF_GPIO - default ARCH_ROCKCHIP help - This support pinctrl and gpio driver for Rockchip SoCs. + Support for the serial GPIO interface used on Microsemi and + Microchip SoCs. By using a serial interface, the SIO + controller significantly extends the number of available + GPIOs with a minimum number of additional pins on the + device. The primary purpose of the SIO controller is to + connect control signals from SFP modules and to act as an + LED controller. -config PINCTRL_SINGLE - tristate "One-register-per-pin type device tree based pinctrl driver" +config PINCTRL_OCELOT + bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" depends on OF depends on HAS_IOMEM - select GENERIC_PINCTRL_GROUPS - select GENERIC_PINMUX_FUNCTIONS - select GENERIC_PINCONF - help - This selects the device tree based generic pinctrl driver. - -config PINCTRL_SX150X - bool "Semtech SX150x I2C GPIO expander pinctrl driver" - depends on I2C=y - select PINMUX - select PINCONF - select GENERIC_PINCONF select GPIOLIB select GPIOLIB_IRQCHIP - select REGMAP - help - Say yes here to provide support for Semtech SX150x-series I2C - GPIO expanders as pinctrl module. - Compatible models include: - - 8 bits: sx1508q, sx1502q - - 16 bits: sx1509q, sx1506q - -config PINCTRL_PISTACHIO - bool "IMG Pistachio SoC pinctrl driver" - depends on OF && (MIPS || COMPILE_TEST) - depends on GPIOLIB - select PINMUX select GENERIC_PINCONF - select GPIOLIB_IRQCHIP + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS select OF_GPIO - help - This support pinctrl and gpio driver for IMG Pistachio SoC. + select REGMAP_MMIO -config PINCTRL_ST +config PINCTRL_OXNAS bool depends on OF select PINMUX select PINCONF - select GPIOLIB_IRQCHIP - -config PINCTRL_STMFX - tristate "STMicroelectronics STMFX GPIO expander pinctrl driver" - depends on I2C - depends on OF_GPIO select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO select GPIOLIB_IRQCHIP - select MFD_STMFX - help - Driver for STMicroelectronics Multi-Function eXpander (STMFX) - GPIO expander. - This provides a GPIO interface supporting inputs and outputs, - and configuring push-pull, open-drain, and can also be used as - interrupt-controller. - -config PINCTRL_MAX77620 - tristate "MAX77620/MAX20024 Pincontrol support" - depends on MFD_MAX77620 && OF - select PINMUX - select GENERIC_PINCONF - help - Say Yes here to enable Pin control support for Maxim PMIC MAX77620. - This PMIC has 8 GPIO pins that work as GPIO as well as special - function in alternate mode. This driver also configure push-pull, - open drain, FPS slots etc. + select MFD_SYSCON config PINCTRL_PALMAS tristate "Pinctrl driver for the PALMAS Series MFD devices" @@ -334,41 +361,16 @@ config PINCTRL_PIC32MZDA def_bool y if PIC32MZDA select PINCTRL_PIC32 -config PINCTRL_ZYNQ - bool "Pinctrl driver for Xilinx Zynq" - depends on ARCH_ZYNQ - select PINMUX - select GENERIC_PINCONF - help - This selects the pinctrl driver for Xilinx Zynq. - -config PINCTRL_ZYNQMP - tristate "Pinctrl driver for Xilinx ZynqMP" - depends on ZYNQMP_FIRMWARE +config PINCTRL_PISTACHIO + bool "IMG Pistachio SoC pinctrl driver" + depends on OF && (MIPS || COMPILE_TEST) + depends on GPIOLIB select PINMUX select GENERIC_PINCONF - default ZYNQMP_FIRMWARE - help - This selects the pinctrl driver for Xilinx ZynqMP platform. - This driver will query the pin information from the firmware - and allow configuring the pins. - Configuration can include the mux function to select on those - pin(s)/group(s), and various pin configuration parameters - such as pull-up, slew rate, etc. - This driver can also be built as a module. If so, the module - will be called pinctrl-zynqmp. - -config PINCTRL_INGENIC - bool "Pinctrl driver for the Ingenic JZ47xx SoCs" - default MACH_INGENIC - depends on OF - depends on MIPS || COMPILE_TEST - select GENERIC_PINCONF - select GENERIC_PINCTRL_GROUPS - select GENERIC_PINMUX_FUNCTIONS - select GPIOLIB select GPIOLIB_IRQCHIP - select REGMAP_MMIO + select OF_GPIO + help + This support pinctrl and GPIO driver for IMG Pistachio SoC. config PINCTRL_RK805 tristate "Pinctrl and GPIO driver for RK805 PMIC" @@ -379,53 +381,75 @@ config PINCTRL_RK805 help This selects the pinctrl driver for RK805. -config PINCTRL_OCELOT - bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" +config PINCTRL_ROCKCHIP + tristate "Rockchip gpio and pinctrl driver" + depends on ARCH_ROCKCHIP || COMPILE_TEST depends on OF - depends on HAS_IOMEM select GPIOLIB - select GPIOLIB_IRQCHIP + select PINMUX select GENERIC_PINCONF - select GENERIC_PINCTRL_GROUPS - select GENERIC_PINMUX_FUNCTIONS + select GENERIC_IRQ_CHIP + select MFD_SYSCON select OF_GPIO - select REGMAP_MMIO + default ARCH_ROCKCHIP + help + This support pinctrl and GPIO driver for Rockchip SoCs. -config PINCTRL_MICROCHIP_SGPIO - bool "Pinctrl driver for Microsemi/Microchip Serial GPIO" +config PINCTRL_SINGLE + tristate "One-register-per-pin type device tree based pinctrl driver" depends on OF depends on HAS_IOMEM - select GPIOLIB - select GPIOLIB_IRQCHIP - select GENERIC_PINCONF select GENERIC_PINCTRL_GROUPS select GENERIC_PINMUX_FUNCTIONS - select OF_GPIO + select GENERIC_PINCONF help - Support for the serial GPIO interface used on Microsemi and - Microchip SoC's. By using a serial interface, the SIO - controller significantly extends the number of available - GPIOs with a minimum number of additional pins on the - device. The primary purpose of the SIO controller is to - connect control signals from SFP modules and to act as an - LED controller. + This selects the device tree based generic pinctrl driver. -config PINCTRL_K210 - bool "Pinctrl driver for the Canaan Kendryte K210 SoC" - depends on RISCV && SOC_CANAAN && OF - select GENERIC_PINMUX_FUNCTIONS +config PINCTRL_ST + bool + depends on OF + select PINMUX + select PINCONF + select GPIOLIB_IRQCHIP + +config PINCTRL_STMFX + tristate "STMicroelectronics STMFX GPIO expander pinctrl driver" + depends on I2C + depends on OF_GPIO + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select MFD_STMFX + help + Driver for STMicroelectronics Multi-Function eXpander (STMFX) + GPIO expander. + This provides a GPIO interface supporting inputs and outputs, + and configuring push-pull, open-drain, and can also be used as + interrupt-controller. + +config PINCTRL_SX150X + bool "Semtech SX150x I2C GPIO expander pinctrl driver" + depends on I2C=y + select PINMUX + select PINCONF select GENERIC_PINCONF select GPIOLIB - select OF_GPIO - select REGMAP_MMIO - default SOC_CANAAN + select GPIOLIB_IRQCHIP + select REGMAP help - Add support for the Canaan Kendryte K210 RISC-V SOC Field - Programmable IO Array (FPIOA) controller. + Say Y here to provide support for Semtech SX150x-series I2C + GPIO expanders as pinctrl module. + Compatible models include: + - 8 bits: sx1508q, sx1502q + - 16 bits: sx1509q, sx1506q -config PINCTRL_KEEMBAY - tristate "Pinctrl driver for Intel Keem Bay SoC" - depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) +config PINCTRL_TB10X + bool + depends on OF && ARC_PLAT_TB10X + select GPIOLIB + +config PINCTRL_THUNDERBAY + tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC" + depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST) depends on HAS_IOMEM select PINMUX select PINCONF @@ -436,18 +460,45 @@ config PINCTRL_KEEMBAY select GPIOLIB_IRQCHIP select GPIO_GENERIC help - This selects pin control driver for the Intel Keembay SoC. - It provides pin config functions such as pullup, pulldown, - interrupt, drive strength, sec lock, schmitt trigger, slew + This selects pin control driver for the Intel Thunder Bay SoC. + It provides pin config functions such as pull-up, pull-down, + interrupt, drive strength, sec lock, Schmitt trigger, slew rate control and direction control. This module will be - called as pinctrl-keembay. + called as pinctrl-thunderbay. + +config PINCTRL_ZYNQ + bool "Pinctrl driver for Xilinx Zynq" + depends on ARCH_ZYNQ + select PINMUX + select GENERIC_PINCONF + help + This selects the pinctrl driver for Xilinx Zynq. + +config PINCTRL_ZYNQMP + tristate "Pinctrl driver for Xilinx ZynqMP" + depends on ZYNQMP_FIRMWARE + select PINMUX + select GENERIC_PINCONF + default ZYNQMP_FIRMWARE + help + This selects the pinctrl driver for Xilinx ZynqMP platform. + This driver will query the pin information from the firmware + and allow configuring the pins. + Configuration can include the mux function to select on those + pin(s)/group(s), and various pin configuration parameters + such as pull-up, slew rate, etc. + This driver can also be built as a module. If so, the module + will be called pinctrl-zynqmp. source "drivers/pinctrl/actions/Kconfig" source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" source "drivers/pinctrl/berlin/Kconfig" +source "drivers/pinctrl/cirrus/Kconfig" source "drivers/pinctrl/freescale/Kconfig" source "drivers/pinctrl/intel/Kconfig" +source "drivers/pinctrl/mediatek/Kconfig" +source "drivers/pinctrl/meson/Kconfig" source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/nomadik/Kconfig" source "drivers/pinctrl/nuvoton/Kconfig" @@ -463,59 +514,7 @@ source "drivers/pinctrl/sunxi/Kconfig" source "drivers/pinctrl/tegra/Kconfig" source "drivers/pinctrl/ti/Kconfig" source "drivers/pinctrl/uniphier/Kconfig" -source "drivers/pinctrl/vt8500/Kconfig" -source "drivers/pinctrl/mediatek/Kconfig" -source "drivers/pinctrl/meson/Kconfig" -source "drivers/pinctrl/cirrus/Kconfig" source "drivers/pinctrl/visconti/Kconfig" - -config PINCTRL_XWAY - bool - depends on SOC_TYPE_XWAY - depends on PINCTRL_LANTIQ - -config PINCTRL_TB10X - bool - depends on OF && ARC_PLAT_TB10X - select GPIOLIB - -config PINCTRL_EQUILIBRIUM - tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC" - depends on OF && HAS_IOMEM - depends on X86 || COMPILE_TEST - select PINMUX - select PINCONF - select GPIOLIB - select GPIO_GENERIC - select GPIOLIB_IRQCHIP - select GENERIC_PINCONF - select GENERIC_PINCTRL_GROUPS - select GENERIC_PINMUX_FUNCTIONS - - help - Equilibrium pinctrl driver is a pinctrl & GPIO driver for Intel Lightning - Mountain network processor SoC that supports both the linux GPIO and pin - control frameworks. It provides interfaces to setup pinmux, assign desired - pin functions, configure GPIO attributes for LGM SoC pins. Pinmux and - pinconf settings are retrieved from device tree. - -config PINCTRL_THUNDERBAY - tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC" - depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST) - depends on HAS_IOMEM - select PINMUX - select PINCONF - select GENERIC_PINCONF - select GENERIC_PINCTRL_GROUPS - select GENERIC_PINMUX_FUNCTIONS - select GPIOLIB - select GPIOLIB_IRQCHIP - select GPIO_GENERIC - help - This selects pin control driver for the Intel Thunder Bay SoC. - It provides pin config functions such as pullup, pulldown, - interrupt, drive strength, sec lock, schmitt trigger, slew - rate control and direction control. This module will be - called as pinctrl-thunderbay. +source "drivers/pinctrl/vt8500/Kconfig" endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 0d5744e..6be6c3f 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -6,57 +6,59 @@ subdir-ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG obj-y += core.o pinctrl-utils.o obj-$(CONFIG_PINMUX) += pinmux.o obj-$(CONFIG_PINCONF) += pinconf.o -obj-$(CONFIG_OF) += devicetree.o obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o +obj-$(CONFIG_OF) += devicetree.o + +obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o -obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o -obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o +obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o obj-$(CONFIG_PINCTRL_BM1880) += pinctrl-bm1880.o obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o -obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o +obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o obj-$(CONFIG_PINCTRL_GEMINI) += pinctrl-gemini.o +obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o +obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o +obj-$(CONFIG_PINCTRL_KEEMBAY) += pinctrl-keembay.o +obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o +obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o +obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o +obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o obj-$(CONFIG_PINCTRL_MCP23S08_I2C) += pinctrl-mcp23s08_i2c.o obj-$(CONFIG_PINCTRL_MCP23S08_SPI) += pinctrl-mcp23s08_spi.o obj-$(CONFIG_PINCTRL_MCP23S08) += pinctrl-mcp23s08.o -obj-$(CONFIG_PINCTRL_MESON) += meson/ +obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o +obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o +obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o +obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o +obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o -obj-$(CONFIG_ARCH_TEGRA) += tegra/ -obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o -obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o -obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o -obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o -obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o -obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o -obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o -obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o -obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o -obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o -obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o -obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o -obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o -obj-$(CONFIG_PINCTRL_KEEMBAY) += pinctrl-keembay.o obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o +obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o +obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o obj-y += actions/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-y += bcm/ obj-$(CONFIG_PINCTRL_BERLIN) += berlin/ +obj-y += cirrus/ obj-y += freescale/ obj-$(CONFIG_X86) += intel/ +obj-y += mediatek/ +obj-$(CONFIG_PINCTRL_MESON) += meson/ obj-y += mvebu/ obj-y += nomadik/ obj-$(CONFIG_ARCH_NPCM7XX) += nuvoton/ @@ -69,9 +71,8 @@ obj-$(CONFIG_PINCTRL_SPEAR) += spear/ obj-y += sprd/ obj-$(CONFIG_PINCTRL_STM32) += stm32/ obj-$(CONFIG_PINCTRL_SUNXI) += sunxi/ +obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-y += ti/ obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/ -obj-$(CONFIG_ARCH_VT8500) += vt8500/ -obj-y += mediatek/ -obj-y += cirrus/ obj-$(CONFIG_PINCTRL_VISCONTI) += visconti/ +obj-$(CONFIG_ARCH_VT8500) += vt8500/