From: Jaehoon Chung Date: Thu, 17 Nov 2016 07:40:40 +0000 (+0900) Subject: mmc: dw_mmc: The "clock-freq-min-max" property was deprecated X-Git-Tag: v4.14-rc1~1898^2~73 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b023030f10573de738bbe8df63d43acab64c9f7b;p=platform%2Fkernel%2Flinux-rpi3.git mmc: dw_mmc: The "clock-freq-min-max" property was deprecated The "clock-freq-min-max" property was deprecated. There is "max-frequency" property in drivers/mmc/core/host.c "max-frequency" can be replaced with "clock-freq-min-max". Minimum clock value might be set to 100K by default. Then MMC core should try to find the correct value from 400K to 100K. So it just needs to set Maximum clock value. Signed-off-by: Jaehoon Chung Reviewed-by: Shawn Lin Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index bfa461a..1279a22 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -59,8 +59,9 @@ Optional properties: is specified and the ciu clock is specified then we'll try to set the ciu clock to this at probe time. -* clock-freq-min-max: Minimum and Maximum clock frequency for card output +* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. + (Use the "max-frequency" instead of "clock-freq-min-max".) * num-slots: specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 3c553dc2..881ca3e 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2609,6 +2609,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) mmc->f_min = DW_MCI_FREQ_MIN; mmc->f_max = DW_MCI_FREQ_MAX; } else { + dev_info(host->dev, + "'clock-freq-min-max' property was deprecated.\n"); mmc->f_min = freq[0]; mmc->f_max = freq[1]; }