From: Guenter Roeck Date: Fri, 27 Mar 2015 01:36:34 +0000 (-0700) Subject: net: dsa: mv88e6171: Use common port configuration X-Git-Tag: v5.15~15978^2~124^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=b0019b70d02bae9757b5b9237f38fb8cf2899009;p=platform%2Fkernel%2Flinux-starfive.git net: dsa: mv88e6171: Use common port configuration Reviewed-by: Andrew Lunn Tested-by: Andrew Lunn Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c index 2f6662c..6ce6a3e 100644 --- a/drivers/net/dsa/mv88e6171.c +++ b/drivers/net/dsa/mv88e6171.c @@ -221,28 +221,6 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p) val |= 0x000c; REG_WRITE(addr, 0x04, val); - /* Port Control 1: disable trunking. Also, if this is the - * CPU port, enable learn messages to be sent to this port. - */ - REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - - /* Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the upstream port. - */ - val = (p & 0xf) << 12; - if (dsa_is_cpu_port(ds, p)) - val |= ds->phys_port_mask; - else - val |= 1 << dsa_upstream_port(ds); - REG_WRITE(addr, 0x06, val); - - /* Default VLAN ID and priority: don't set a default VLAN - * ID, and set the default packet priority to zero. - */ - REG_WRITE(addr, 0x07, 0x0000); - /* Port Control 2: don't force a good FCS, set the maximum * frame size to 10240 bytes, don't let the switch add or * strip 802.1q tags, don't discard tagged or untagged frames @@ -287,7 +265,7 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p) */ REG_WRITE(addr, 0x19, 0x7654); - return 0; + return mv88e6xxx_setup_port_common(ds, p); } static int mv88e6171_setup(struct dsa_switch *ds)