From: Amelie Delaunay Date: Mon, 4 Nov 2019 10:55:28 +0000 (+0100) Subject: ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 X-Git-Tag: v5.4-rc7~1^2~1^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=afe3af89cd38ebab2e432a54590acb262c3e15ac;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 "push-pull" configuration is now fully handled by the gpiolib and the STMFX pinctrl driver. There is no longer need to declare a pinctrl group to only configure "push-pull" setting for the line. It is done directly by the gpiolib. Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings") Signed-off-by: Alexandre Torgue Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 89d29b5..9928d43 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -183,14 +183,12 @@ ov5640: camera@3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; DOVDD-supply = <&v2v8>; - powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; + reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; status = "okay"; @@ -226,12 +224,6 @@ drive-push-pull; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; };