From: Chen-Yu Tsai <wens@csie.org>
Date: Sun, 29 Nov 2015 03:03:09 +0000 (+0800)
Subject: ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
X-Git-Tag: v4.14-rc1~3962^2~16^2~30
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=afd7d66c240ba734740b1b4daccd8b1cc735b788;p=platform%2Fkernel%2Flinux-rpi.git

ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes

This adds the supported PRCM clocks and reset controls to the A80 dtsi.
The DAUDIO module clocks are not supported yet.

Also update clock and reset phandles for r_uart.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 1118bf5..a4ce348 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -164,6 +164,14 @@
 					     "usb_phy2", "usb_hsic_12M";
 		};
 
+		pll3: clk@06000008 {
+			/* placeholder until implemented */
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-rate = <0>;
+			clock-output-names = "pll3";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -350,6 +358,68 @@
 					"apb1_uart2", "apb1_uart3",
 					"apb1_uart4", "apb1_uart5";
 		};
+
+		cpus_clk: clk@08001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: ahbs_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@0800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@08001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@08001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@08001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
 	};
 
 	soc {
@@ -764,13 +834,20 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		apbs_rst: reset@080014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
 		r_uart: serial@08002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
 			status = "disabled";
 		};
 	};