From: Alan Tull Date: Wed, 7 Oct 2015 15:36:27 +0000 (+0100) Subject: fpga manager: add sysfs interface document X-Git-Tag: v4.14-rc1~4418^2~64 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=afb79e993a949d02895b912eacc86ab0e416b6fd;p=platform%2Fkernel%2Flinux-rpi.git fpga manager: add sysfs interface document Add documentation under drivers/staging for new fpga manager's sysfs interface. Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager new file mode 100644 index 0000000..23056c5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager @@ -0,0 +1,37 @@ +What: /sys/class/fpga_manager//name +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull +Description: Name of low level fpga manager driver. + +What: /sys/class/fpga_manager//state +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull +Description: Read fpga manager state as a string. + The intent is to provide enough detail that if something goes + wrong during FPGA programming (something that the driver can't + fix) then userspace can know, i.e. if the firmware request + fails, that could be due to not being able to find the firmware + file. + + This is a superset of FPGA states and fpga manager driver + states. The fpga manager driver is walking through these steps + to get the FPGA into a known operating state. It's a sequence, + though some steps may get skipped. Valid FPGA states will vary + by manufacturer; this is a superset. + + * unknown = can't determine state + * power off = FPGA power is off + * power up = FPGA reports power is up + * reset = FPGA held in reset state + * firmware request = firmware class request in progress + * firmware request error = firmware request failed + * write init = preparing FPGA for programming + * write init error = Error while preparing FPGA for + programming + * write = FPGA ready to receive image data + * write error = Error while programming + * write complete = Doing post programming steps + * write complete error = Error while doing post programming + * operating = FPGA is programmed and operating