From: John G. Rogers Date: Sat, 24 Jul 2010 13:50:52 +0000 (-0400) Subject: USB: serial: enabling support for Segway RMP in ftdi_sio X-Git-Tag: v2.6.36-rc1~293^2~26 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=afad19648f70c6493193e0a774bd754b7790b4a0;p=profile%2Fivi%2Fkernel-adaptation-intel-automotive.git USB: serial: enabling support for Segway RMP in ftdi_sio I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by: John Rogers Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e298dc4..a3671db 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -746,6 +746,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index d01946d..74f0942 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1032,3 +1032,8 @@ #define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 #define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 +/* + * Segway Robotic Mobility Platform USB interface (using VID 0x0403) + * Submitted by John G. Rogers + */ +#define SEGWAY_RMP200_PID 0xe729