From: Michal Simek Date: Wed, 19 Jan 2022 11:01:51 +0000 (+0100) Subject: arm64: zynqmp: Remove SOM *u-boot.dtsi X-Git-Tag: v2022.07~174^2~20 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=af98bf62fab8f074822a225d7c2fb2a02a7734a8;p=platform%2Fkernel%2Fu-boot.git arm64: zynqmp: Remove SOM *u-boot.dtsi Disable mmc from u-boot.dtsi file because it was there only for kv260 board. With kr260 this is not needed because we will switch to full DT per board with SD/EMMC there too. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/3440d9f94361b4800658f313a5785f43ee84ecf3.1642590109.git.michal.simek@xilinx.com --- diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi deleted file mode 100644 index 467df9f..0000000 --- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for Xilinx ZynqMP K26/KV260 SD wiring - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * Michal Simek - */ - -/* SD0 only supports 3.3V, no level shifter */ -&sdhci1 { /* on CC - MIO 39 - 51 */ - status = "okay"; - no-1-8-v; - disable-wp; - broken-cd; - xlnx,mio-bank = <1>; - /* Do not run SD in HS mode from bootloader */ - sdhci-caps-mask = <0 0x200000>; - sdhci-caps = <0 0>; - max-frequency = <19000000>; -}; diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi deleted file mode 100644 index 34e6328..0000000 --- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * dts file for Xilinx ZynqMP Z2-VSOM - * - * (C) Copyright 2020 - 2021, Xilinx, Inc. - * - * Michal Simek - */ - -/* SD0 only supports 3.3V, no level shifter */ -&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */ - status = "okay"; - no-1-8-v; - disable-wp; - broken-cd; - xlnx,mio-bank = <1>; - /* Do not run SD in HS mode from bootloader */ - sdhci-caps-mask = <0 0x200000>; - sdhci-caps = <0 0>; - max-frequency = <19000000>; -};