From: Jaehoon Chung Date: Sun, 10 May 2020 22:34:55 +0000 (+0900) Subject: amlogic: w400: add tizen-boot odroid-n2 script X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ada10bb36d442e0fb7ed4524789d53aff3958191;p=platform%2Fkernel%2Fu-boot.git amlogic: w400: add tizen-boot odroid-n2 script Add tizen-boot-odroid-n2 boot script. Signed-off-by: Jaehoon Chung --- diff --git a/board/amlogic/w400/tizen-boot-odroid-n2-64b.scr b/board/amlogic/w400/tizen-boot-odroid-n2-64b.scr new file mode 100644 index 0000000000..c1137295d1 --- /dev/null +++ b/board/amlogic/w400/tizen-boot-odroid-n2-64b.scr @@ -0,0 +1,151 @@ +# U-boot script for tizen RPI3 +# Auto Detection of Monitor settings based on your Screen information +setenv display_autodetect "true" + +# HDMI Mode +# Resolution Configuration +# Symbol | Resolution +# ----------------------+------------- +# "480x272p60hz" | 480x272 Progressive 60Hz +# "480x320p60hz" | 480x320 Progressive 60Hz +# "480p60hz" | 720x480 Progressive 60Hz +# "576p50hz" | 720x576 Progressive 50Hz +# "720p60hz" | 1280x720 Progressive 60Hz +# "720p50hz" | 1280x720 Progressive 50Hz +# "1080p60hz" | 1920x1080 Progressive 60Hz +# "1080p50hz" | 1920x1080 Progressive 50Hz +# "1080p30hz" | 1920x1080 Progressive 30Hz +# "1080p24hz" | 1920x1080 Progressive 24Hz +# "1080i60hz" | 1920x1080 Interlaced 60Hz +# "1080i50hz" | 1920x1080 Interlaced 50Hz +# "2160p60hz" | 3840x2160 Progressive 60Hz +# "2160p50hz" | 3840x2160 Progressive 50Hz +# "2160p30hz" | 3840x2160 Progressive 30Hz +# "2160p25hz" | 3840x2160 Progressive 25Hz +# "2160p24hz" | 3840x2160 Progressive 24Hz +# "smpte24hz" | 3840x2160 Progressive 24Hz SMPTE +# "2160p60hz420" | 3840x2160 Progressive 60Hz YCbCr 4:2:0 +# "2160p50hz420" | 3840x2160 Progressive 50Hz YCbCr 4:2:0 +# "640x480p60hz" | 640x480 Progressive 60Hz +# "800x480p60hz" | 800x480 Progressive 60Hz +# "800x600p60hz" | 800x600 Progressive 60Hz +# "1024x600p60hz" | 1024x600 Progressive 60Hz +# "1024x768p60hz" | 1024x768 Progressive 60Hz +# "1280x800p60hz" | 1280x800 Progressive 60Hz +# "1280x1024p60hz" | 1280x1024 Progressive 60Hz +# "1360x768p60hz" | 1360x768 Progressive 60Hz +# "1440x900p60hz" | 1440x900 Progressive 60Hz +# "1600x900p60hz" | 1600x900 Progressive 60Hz +# "1600x1200p60hz" | 1600x1200 Progressive 60Hz +# "1680x1050p60hz" | 1680x1050 Progressive 60Hz +# "1920x1200p60hz" | 1920x1200 Progressive 60Hz +# "2560x1080p60hz" | 2560x1080 Progressive 60Hz +# "2560x1440p60hz" | 2560x1440 Progressive 60Hz +# "2560x1600p60hz" | 2560x1600 Progressive 60Hz +# "3440x1440p60hz" | 3440x1440 Progressive 60Hz +setenv hdmimode "1080p60hz" + +# Monitor output +# Controls if HDMI PHY should output anything to the monitor +setenv monitor_onoff "false" # true or false + +# Overscan percentage +# This value scales down the actual screen size by the percentage below +# valid range is 80 to 100 +setenv overscan "100" + +### voutmode : hdmi or dvi +setenv voutmode "hdmi" +# setenv voutmode "dvi" + +# HPD enable/disable option +setenv disablehpd "false" + +# Hardkernel ODROID-VU7 support +# By default VU7 support is disabled +setenv disable_vu7 "true" +# setenv disable_vu7 "false" + +# max cpu frequency for big core, A73 in MHz unit +# setenv max_freq_a73 "2004" # 2.004 GHz +# setenv max_freq_a73 "1992" # 1.992 GHz +# setenv max_freq_a73 "1908" # 1.908 GHz +setenv max_freq_a73 "1800" # 1.8 GHz, default value +# setenv max_freq_a73 "1704" # 1.704 GHz + +# max cpu frequency for little core, A53 in MHz unit +# setenv max_freq_a53 "1992" # 1.992 GHz +setenv max_freq_a53 "1896" # 1.896 GHz, default value +# setenv max_freq_a53 "1704" # 1.704 GHz + + +# max cpu-cores +# Note: +# CPU's 0 and 1 are the A53 (small cores) +# CPU's 2 to 5 are the A73 (big cores) +# Lowering this value disables only the bigger cores (the last cores). +# setenv maxcpus "4" +# setenv maxcpus "5" +setenv maxcpus "6" + +# VU7 Settings +if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi + +# Set load addresses +setenv fdt_addr_r "0x1000000" +setenv tizen_kernel_addr_r "0x1100000" +setenv ramdisk_addr_r "0x3700000" + +# This is for jumping to flash mode on u-boot. +if test "${bootmode}" = "download"; then; + setenv ramdiskpart 8 + setenv ramdisksize c00000 + setenv bootmode flash +fi + +if test "${bootmode}" = "flash"; then; + if test -n "${ipaddr}"; then; + ip_opt=\"ip=${ipaddr}::${gateway}:${netmask}\" + fi +fi + +# boot from ram0 if there is sbin +if test -e $bootdev $mmcrootdev:$ramdiskpart sbin/init; then; + setenv rootdev ram0 +else + setenv rootdev mmcblk${mmcrootdev}p${mmcrootpart} + setenv bootmode normal +fi + +# setting console device if noting is set +if test -z "${console}"; then; + setenv console "console=ttyS0,115200n8" +fi +echo "console: ${console}" + +# Kernel image +kernel=Image +# DT image by model +setenv fdtfile \"meson64_odroidn2_drm.dtb\" + +setenv boot_prefixes \"/\" + +# To use comdline for using serial console. /* Normal mode */ +setenv bootargs \"${tizen_bootarg} root=/dev/${rootdev} rootwait rw ${amlogic} no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a53=${max_freq_a53} max_freq_a73=${max_freq_a73} maxcpus=${maxcpus} voutmode=${voutmode} ${cmode} disablehpd=${disablehpd} cvbscable=${cvbscable} overscan=${overscan} ${hid_quirks} monitor_onoff=${monitor_onoff} usb-xhci.tablesize=2 logo=osd0,loaded ${console}\" + +# Find the ramdisk offset and block count +part start $bootdev $mmcrootdev $ramdiskpart ramdisk_start +part size $bootdev $mmcrootdev $ramdiskpart ramdisk_size + +echo "Searching for kernel in"; for prefix in $boot_prefixes; do +if load $bootdev $mmcbootdev:$mmcbootpart $tizen_kernel_addr_r $prefix$kernel; then; + echo ${bootmode} "boot"; + load $bootdev $mmcbootdev:$mmcbootpart $fdt_addr_r $fdtfile; + if test -e mmc $mmcrootdev:$ramdiskpart sbin/init; then; + echo "Loading Ramdisk from partition"${ramdiskpart}; + mmc read $ramdisk_addr_r $ramdisk_start $ramdisk_size; + fi + booti $tizen_kernel_addr_r $ramdisk_addr_r:$ramdisksize $fdt_addr_r; +fi +done +