From: Thinh Nguyen Date: Fri, 22 Apr 2022 02:22:57 +0000 (-0700) Subject: usb: dwc3: gadget: Only End Transfer for ep0 data phase X-Git-Tag: v6.1-rc5~1161^2~42 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ace17b6ee4f92ab0375d12a1b42494f8590a96b6;p=platform%2Fkernel%2Flinux-starfive.git usb: dwc3: gadget: Only End Transfer for ep0 data phase The driver shouldn't be able to issue End Transfer to the control endpoint at anytime. Typically we should only do so in error cases such as invalid/unexpected direction of Data Phase as described in the control transfer flow of the programming guide. It _may_ end started data phase during controller deinitialization from soft disconnect or driver removal. However, that should not happen because the driver should be maintained in EP0_SETUP_PHASE during driver tear-down. On soft-connect, the controller should be reset from a soft-reset and there should be no issue starting the control endpoint. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/3c6643678863a26702e4115e9e19d7d94a30d49c.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 5e3311e..4f445f8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3685,6 +3685,17 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt) { + struct dwc3 *dwc = dep->dwc; + + /* + * Only issue End Transfer command to the control endpoint of a started + * Data Phase. Typically we should only do so in error cases such as + * invalid/unexpected direction as described in the control transfer + * flow of the programming guide. + */ + if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE) + return; + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) || (dep->flags & DWC3_EP_DELAY_STOP) || (dep->flags & DWC3_EP_END_TRANSFER_PENDING))