From: Marcin Kościelnicki Date: Sun, 17 Jan 2016 21:59:06 +0000 (+0100) Subject: gdbserver/s390: Add fast tracepoint support. X-Git-Tag: binutils-2_27~967 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=abd9baf9c61a76537766c81e235a4a5a49b7dee3;p=external%2Fbinutils.git gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file. --- diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index a7a8d2b..350bc4b 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,5 +1,66 @@ 2016-03-29 Marcin Kościelnicki + PR 18377 + * Makefile.in: Add s390 IPA files. + * configure.srv: Build IPA for s390. + * linux-s390-ipa.c: New file. + * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. + (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. + (tdesc_s390_linux32): Likewise. + (init_registers_s390_linux32v1): Likewise. + (tdesc_s390_linux32v1): Likewise. + (init_registers_s390_linux32v2): Likewise. + (tdesc_s390_linux32v2): Likewise. + (init_registers_s390_linux64): Likewise. + (tdesc_s390_linux64): Likewise. + (init_registers_s390_linux64v1): Likewise. + (tdesc_s390_linux64v1): Likewise. + (init_registers_s390_linux64v2): Likewise. + (tdesc_s390_linux64v2): Likewise. + (init_registers_s390_te_linux64): Likewise. + (tdesc_s390_te_linux64): Likewise. + (init_registers_s390_vx_linux64): Likewise. + (tdesc_s390_vx_linux64): Likewise. + (init_registers_s390_tevx_linux64): Likewise. + (tdesc_s390_tevx_linux64): Likewise. + (init_registers_s390x_linux64): Likewise. + (tdesc_s390x_linux64): Likewise. + (init_registers_s390x_linux64v1): Likewise. + (tdesc_s390x_linux64v1): Likewise. + (init_registers_s390x_linux64v2): Likewise. + (tdesc_s390x_linux64v2): Likewise. + (init_registers_s390x_te_linux64): Likewise. + (tdesc_s390x_te_linux64): Likewise. + (init_registers_s390x_vx_linux64): Likewise. + (tdesc_s390x_vx_linux64): Likewise. + (init_registers_s390x_tevx_linux64): Likewise. + (tdesc_s390x_tevx_linux64): Likewise. + (have_hwcap_s390_vx): New static variable. + (s390_arch_setup): Fill have_hwcap_s390_vx. + (s390_get_thread_area): New function. + (s390_ft_entry_gpr_esa): New const. + (s390_ft_entry_gpr_zarch): New const. + (s390_ft_entry_misc): New const. + (s390_ft_entry_fr): New const. + (s390_ft_entry_vr): New const. + (s390_ft_main_31): New const. + (s390_ft_main_64): New const. + (s390_ft_exit_fr): New const. + (s390_ft_exit_vr): New const. + (s390_ft_exit_misc): New const. + (s390_ft_exit_gpr_esa): New const. + (s390_ft_exit_gpr_zarch): New const. + (append_insns): New function. + (s390_relocate_instruction): New function. + (s390_install_fast_tracepoint_jump_pad): New function. + (s390_get_min_fast_tracepoint_insn_len): New function. + (s390_get_ipa_tdesc_idx): New function. + (struct linux_target_ops): Wire in the above functions. + (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. + * linux-s390-tdesc.h: New file. + +2016-03-29 Marcin Kościelnicki + * linux-s390-low.c (s390_supports_tracepoints): New function. (struct linux_target_ops): Fill supports_tracepoints hook. diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in index 257e9bf..48e843b 100644 --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -531,6 +531,54 @@ linux-aarch64-ipa.o: linux-aarch64-ipa.c aarch64-ipa.o: aarch64.c $(IPAGENT_COMPILE) $< $(POSTCOMPILE) +linux-s390-ipa.o: linux-s390-ipa.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux32-ipa.o: s390-linux32.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux32v1-ipa.o: s390-linux32v1.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux32v2-ipa.o: s390-linux32v2.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux64-ipa.o: s390-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux64v1-ipa.o: s390-linux64v1.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-linux64v2-ipa.o: s390-linux64v2.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-te-linux64-ipa.o: s390-te-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-vx-linux64-ipa.o: s390-vx-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390-tevx-linux64-ipa.o: s390-tevx-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-linux64-ipa.o: s390x-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-linux64v1-ipa.o: s390x-linux64v1.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-linux64v2-ipa.o: s390x-linux64v2.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-te-linux64-ipa.o: s390x-te-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-vx-linux64-ipa.o: s390x-vx-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) +s390x-tevx-linux64-ipa.o: s390x-tevx-linux64.c + $(IPAGENT_COMPILE) $< + $(POSTCOMPILE) tdesc-ipa.o: tdesc.c $(IPAGENT_COMPILE) $< $(POSTCOMPILE) diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv index a89b1d1..ce02876 100644 --- a/gdb/gdbserver/configure.srv +++ b/gdb/gdbserver/configure.srv @@ -307,6 +307,22 @@ case "${target}" in srv_linux_usrregs=yes srv_linux_regsets=yes srv_linux_thread_db=yes + ipa_obj="linux-s390-ipa.o" + ipa_obj="${ipa_obj} s390-linux32-ipa.o" + ipa_obj="${ipa_obj} s390-linux32v1-ipa.o" + ipa_obj="${ipa_obj} s390-linux32v2-ipa.o" + ipa_obj="${ipa_obj} s390-linux64-ipa.o" + ipa_obj="${ipa_obj} s390-linux64v1-ipa.o" + ipa_obj="${ipa_obj} s390-linux64v2-ipa.o" + ipa_obj="${ipa_obj} s390-vx-linux64-ipa.o" + ipa_obj="${ipa_obj} s390-te-linux64-ipa.o" + ipa_obj="${ipa_obj} s390-tevx-linux64-ipa.o" + ipa_obj="${ipa_obj} s390x-linux64-ipa.o" + ipa_obj="${ipa_obj} s390x-linux64v1-ipa.o" + ipa_obj="${ipa_obj} s390x-linux64v2-ipa.o" + ipa_obj="${ipa_obj} s390x-vx-linux64-ipa.o" + ipa_obj="${ipa_obj} s390x-te-linux64-ipa.o" + ipa_obj="${ipa_obj} s390x-tevx-linux64-ipa.o" ;; sh*-*-linux*) srv_regobj=reg-sh.o srv_tgtobj="$srv_linux_obj linux-sh-low.o" diff --git a/gdb/gdbserver/linux-s390-ipa.c b/gdb/gdbserver/linux-s390-ipa.c new file mode 100644 index 0000000..d804188 --- /dev/null +++ b/gdb/gdbserver/linux-s390-ipa.c @@ -0,0 +1,394 @@ +/* GNU/Linux S/390 specific low level interface, for the in-process + agent library for GDB. + + Copyright (C) 2016 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#include "server.h" +#include "tracepoint.h" +#include "linux-s390-tdesc.h" + +#define FT_FPR(x) (0x000 + (x) * 0x10) +#define FT_VR(x) (0x000 + (x) * 0x10) +#define FT_VR_L(x) (0x008 + (x) * 0x10) +#define FT_GPR(x) (0x200 + (x) * 8) +#define FT_GPR_U(x) (0x200 + (x) * 8) +#define FT_GPR_L(x) (0x204 + (x) * 8) +#define FT_GPR(x) (0x200 + (x) * 8) +#define FT_ACR(x) (0x280 + (x) * 4) +#define FT_PSWM 0x2c0 +#define FT_PSWM_U 0x2c0 +#define FT_PSWA 0x2c8 +#define FT_PSWA_L 0x2cc +#define FT_FPC 0x2d0 + +/* Mappings between registers collected by the jump pad and GDB's register + array layout used by regcache. + + See linux-s390-low.c (s390_install_fast_tracepoint_jump_pad) for more + details. */ + +#ifndef __s390x__ + +/* Used for s390-linux32, s390-linux32v1, s390-linux32v2. */ + +static const int s390_linux32_ft_collect_regmap[] = { + /* 32-bit PSWA and PSWM. */ + FT_PSWM_U, FT_PSWA_L, + /* 32-bit GPRs (mapped to lower halves of 64-bit slots). */ + FT_GPR_L (0), FT_GPR_L (1), FT_GPR_L (2), FT_GPR_L (3), + FT_GPR_L (4), FT_GPR_L (5), FT_GPR_L (6), FT_GPR_L (7), + FT_GPR_L (8), FT_GPR_L (9), FT_GPR_L (10), FT_GPR_L (11), + FT_GPR_L (12), FT_GPR_L (13), FT_GPR_L (14), FT_GPR_L (15), + /* ACRs */ + FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3), + FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7), + FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11), + FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15), + /* FPRs (mapped to upper halves of 128-bit VR slots). */ + FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3), + FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7), + FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11), + FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15), + /* orig_r2, last_break, system_call */ + -1, -1, -1, +}; + +/* Used for s390-linux64, s390-linux64v1, s390-linux64v2, s390-vx-linux64. */ + +static const int s390_linux64_ft_collect_regmap[] = { + /* 32-bit PSWA and PSWM. */ + FT_PSWM_U, FT_PSWA_L, + /* 32-bit halves of 64-bit GPRs. */ + FT_GPR_U (0), FT_GPR_L (0), + FT_GPR_U (1), FT_GPR_L (1), + FT_GPR_U (2), FT_GPR_L (2), + FT_GPR_U (3), FT_GPR_L (3), + FT_GPR_U (4), FT_GPR_L (4), + FT_GPR_U (5), FT_GPR_L (5), + FT_GPR_U (6), FT_GPR_L (6), + FT_GPR_U (7), FT_GPR_L (7), + FT_GPR_U (8), FT_GPR_L (8), + FT_GPR_U (9), FT_GPR_L (9), + FT_GPR_U (10), FT_GPR_L (10), + FT_GPR_U (11), FT_GPR_L (11), + FT_GPR_U (12), FT_GPR_L (12), + FT_GPR_U (13), FT_GPR_L (13), + FT_GPR_U (14), FT_GPR_L (14), + FT_GPR_U (15), FT_GPR_L (15), + /* ACRs */ + FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3), + FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7), + FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11), + FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15), + /* FPRs (mapped to upper halves of 128-bit VR slots). */ + FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3), + FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7), + FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11), + FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15), + /* orig_r2, last_break, system_call */ + -1, -1, -1, + /* Lower halves of 128-bit VRs. */ + FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3), + FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7), + FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11), + FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15), + /* And the next 16 VRs. */ + FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19), + FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23), + FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27), + FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31), +}; + +/* Used for s390-te-linux64, s390-tevx-linux64. */ + +static const int s390_te_linux64_ft_collect_regmap[] = { + /* 32-bit PSWA and PSWM. */ + FT_PSWM_U, FT_PSWA_L, + /* 32-bit halves of 64-bit GPRs. */ + FT_GPR_U (0), FT_GPR_L (0), + FT_GPR_U (1), FT_GPR_L (1), + FT_GPR_U (2), FT_GPR_L (2), + FT_GPR_U (3), FT_GPR_L (3), + FT_GPR_U (4), FT_GPR_L (4), + FT_GPR_U (5), FT_GPR_L (5), + FT_GPR_U (6), FT_GPR_L (6), + FT_GPR_U (7), FT_GPR_L (7), + FT_GPR_U (8), FT_GPR_L (8), + FT_GPR_U (9), FT_GPR_L (9), + FT_GPR_U (10), FT_GPR_L (10), + FT_GPR_U (11), FT_GPR_L (11), + FT_GPR_U (12), FT_GPR_L (12), + FT_GPR_U (13), FT_GPR_L (13), + FT_GPR_U (14), FT_GPR_L (14), + FT_GPR_U (15), FT_GPR_L (15), + /* ACRs */ + FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3), + FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7), + FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11), + FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15), + /* FPRs (mapped to upper halves of 128-bit VR slots). */ + FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3), + FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7), + FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11), + FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15), + /* orig_r2, last_break, system_call */ + -1, -1, -1, + /* TDB */ + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + /* Lower halves of 128-bit VRs. */ + FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3), + FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7), + FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11), + FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15), + /* And the next 16 VRs. */ + FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19), + FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23), + FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27), + FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31), +}; + +#else /* __s390x__ */ + +/* Used for s390x-linux64, s390x-linux64v1, s390x-linux64v2, s390x-vx-linux64. */ + +static const int s390x_ft_collect_regmap[] = { + /* 64-bit PSWA and PSWM. */ + FT_PSWM, FT_PSWA, + /* 64-bit GPRs. */ + FT_GPR (0), FT_GPR (1), FT_GPR (2), FT_GPR (3), + FT_GPR (4), FT_GPR (5), FT_GPR (6), FT_GPR (7), + FT_GPR (8), FT_GPR (9), FT_GPR (10), FT_GPR (11), + FT_GPR (12), FT_GPR (13), FT_GPR (14), FT_GPR (15), + /* ACRs */ + FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3), + FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7), + FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11), + FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15), + /* FPRs (mapped to upper halves of 128-bit VR slots). */ + FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3), + FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7), + FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11), + FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15), + /* orig_r2, last_break, system_call */ + -1, -1, -1, + /* Lower halves of 128-bit VRs. */ + FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3), + FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7), + FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11), + FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15), + /* And the next 16 VRs. */ + FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19), + FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23), + FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27), + FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31), +}; + +/* Used for s390x-te-linux64, s390x-tevx-linux64. */ + +static const int s390x_te_ft_collect_regmap[] = { + /* 64-bit PSWA and PSWM. */ + FT_PSWM, FT_PSWA, + /* 64-bit GPRs. */ + FT_GPR (0), FT_GPR (1), FT_GPR (2), FT_GPR (3), + FT_GPR (4), FT_GPR (5), FT_GPR (6), FT_GPR (7), + FT_GPR (8), FT_GPR (9), FT_GPR (10), FT_GPR (11), + FT_GPR (12), FT_GPR (13), FT_GPR (14), FT_GPR (15), + /* ACRs */ + FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3), + FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7), + FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11), + FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15), + /* FPRs (mapped to upper halves of 128-bit VR slots). */ + FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3), + FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7), + FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11), + FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15), + /* orig_r2, last_break, system_call */ + -1, -1, -1, + /* TDB */ + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + -1, -1, -1, -1, + /* Lower halves of 128-bit VRs. */ + FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3), + FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7), + FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11), + FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15), + /* And the next 16 VRs. */ + FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19), + FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23), + FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27), + FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31), +}; + +#endif + +/* Initialized by get_ipa_tdesc according to the tdesc in use. */ + +static const int *s390_regmap; +static int s390_regnum; + +/* Fill in REGCACHE with registers saved by the jump pad in BUF. */ + +void +supply_fast_tracepoint_registers (struct regcache *regcache, + const unsigned char *buf) +{ + int i; + for (i = 0; i < s390_regnum; i++) + if (s390_regmap[i] != -1) + supply_register (regcache, i, ((char *) buf) + s390_regmap[i]); +} + +IP_AGENT_EXPORT_FUNC ULONGEST +gdb_agent_get_raw_reg (const unsigned char *raw_regs, int regnum) +{ + int offset; + if (regnum >= s390_regnum) + return 0; + offset = s390_regmap[regnum]; + if (offset == -1) + return 0; + + /* The regnums are variable, better to figure out size by FT offset. */ + + /* 64-bit ones. */ + if (offset < FT_VR(16) +#ifdef __s390x__ + || (offset >= FT_GPR(0) && offset < FT_ACR(0)) + || offset == FT_PSWM + || offset == FT_PSWA +#endif + ) + return *(uint64_t *) (raw_regs + offset); + + if (offset >= FT_ACR(0 && offset < FT_PSWM) + || offset == FT_FPC +#ifndef __s390x__ + || (offset >= FT_GPR(0) && offset < FT_ACR(0)) + || offset == FT_PSWM_U + || offset == FT_PSWA_L +#endif + ) + return *(uint32_t *) (raw_regs + offset); + + /* This leaves 128-bit VX. No way to return them. */ + return 0; +} + +/* Return target_desc to use for IPA, given the tdesc index passed by + gdbserver. For s390, it also sets s390_regmap and s390_regnum. */ + +const struct target_desc * +get_ipa_tdesc (int idx) +{ +#define SET_REGMAP(regmap, skip_last) \ + do { \ + s390_regmap = regmap; \ + s390_regnum = (sizeof regmap / sizeof regmap[0]) - skip_last; \ + } while(0) + switch (idx) + { +#ifdef __s390x__ + case S390_TDESC_64: + /* Subtract number of VX regs. */ + SET_REGMAP(s390x_ft_collect_regmap, 32); + return tdesc_s390x_linux64; + case S390_TDESC_64V1: + SET_REGMAP(s390x_ft_collect_regmap, 32); + return tdesc_s390x_linux64v1; + case S390_TDESC_64V2: + SET_REGMAP(s390x_ft_collect_regmap, 32); + return tdesc_s390x_linux64v2; + case S390_TDESC_TE: + SET_REGMAP(s390x_te_ft_collect_regmap, 32); + return tdesc_s390x_te_linux64; + case S390_TDESC_VX: + SET_REGMAP(s390x_ft_collect_regmap, 0); + return tdesc_s390x_vx_linux64; + case S390_TDESC_TEVX: + SET_REGMAP(s390x_te_ft_collect_regmap, 0); + return tdesc_s390x_tevx_linux64; +#else + case S390_TDESC_32: + SET_REGMAP(s390_linux32_ft_collect_regmap, 0); + return tdesc_s390_linux32; + case S390_TDESC_32V1: + SET_REGMAP(s390_linux32_ft_collect_regmap, 0); + return tdesc_s390_linux32v1; + case S390_TDESC_32V2: + SET_REGMAP(s390_linux32_ft_collect_regmap, 0); + return tdesc_s390_linux32v2; + case S390_TDESC_64: + SET_REGMAP(s390_linux64_ft_collect_regmap, 32); + return tdesc_s390_linux64; + case S390_TDESC_64V1: + SET_REGMAP(s390_linux64_ft_collect_regmap, 32); + return tdesc_s390_linux64v1; + case S390_TDESC_64V2: + SET_REGMAP(s390_linux64_ft_collect_regmap, 32); + return tdesc_s390_linux64v2; + case S390_TDESC_TE: + SET_REGMAP(s390_te_linux64_ft_collect_regmap, 32); + return tdesc_s390_te_linux64; + case S390_TDESC_VX: + SET_REGMAP(s390_linux64_ft_collect_regmap, 0); + return tdesc_s390_vx_linux64; + case S390_TDESC_TEVX: + SET_REGMAP(s390_te_linux64_ft_collect_regmap, 0); + return tdesc_s390_tevx_linux64; +#endif + default: + internal_error (__FILE__, __LINE__, + "unknown ipa tdesc index: %d", idx); +#ifdef __s390x__ + return tdesc_s390x_linux64; +#else + return tdesc_s390_linux32; +#endif + } +} + +void +initialize_low_tracepoint (void) +{ +#ifdef __s390x__ + init_registers_s390x_linux64 (); + init_registers_s390x_linux64v1 (); + init_registers_s390x_linux64v2 (); + init_registers_s390x_te_linux64 (); + init_registers_s390x_vx_linux64 (); + init_registers_s390x_tevx_linux64 (); +#else + init_registers_s390_linux32 (); + init_registers_s390_linux32v1 (); + init_registers_s390_linux32v2 (); + init_registers_s390_linux64 (); + init_registers_s390_linux64v1 (); + init_registers_s390_linux64v2 (); + init_registers_s390_te_linux64 (); + init_registers_s390_vx_linux64 (); + init_registers_s390_tevx_linux64 (); +#endif +} diff --git a/gdb/gdbserver/linux-s390-low.c b/gdb/gdbserver/linux-s390-low.c index 2bcfa7a..628cd15 100644 --- a/gdb/gdbserver/linux-s390-low.c +++ b/gdb/gdbserver/linux-s390-low.c @@ -27,6 +27,9 @@ #include "nat/gdb_ptrace.h" #include #include +#include + +#include "linux-s390-tdesc.h" #ifndef HWCAP_S390_HIGH_GPRS #define HWCAP_S390_HIGH_GPRS 512 @@ -40,66 +43,6 @@ #define HWCAP_S390_VX 2048 #endif -/* Defined in auto-generated file s390-linux32.c. */ -void init_registers_s390_linux32 (void); -extern const struct target_desc *tdesc_s390_linux32; - -/* Defined in auto-generated file s390-linux32v1.c. */ -void init_registers_s390_linux32v1 (void); -extern const struct target_desc *tdesc_s390_linux32v1; - -/* Defined in auto-generated file s390-linux32v2.c. */ -void init_registers_s390_linux32v2 (void); -extern const struct target_desc *tdesc_s390_linux32v2; - -/* Defined in auto-generated file s390-linux64.c. */ -void init_registers_s390_linux64 (void); -extern const struct target_desc *tdesc_s390_linux64; - -/* Defined in auto-generated file s390-linux64v1.c. */ -void init_registers_s390_linux64v1 (void); -extern const struct target_desc *tdesc_s390_linux64v1; - -/* Defined in auto-generated file s390-linux64v2.c. */ -void init_registers_s390_linux64v2 (void); -extern const struct target_desc *tdesc_s390_linux64v2; - -/* Defined in auto-generated file s390-te-linux64.c. */ -void init_registers_s390_te_linux64 (void); -extern const struct target_desc *tdesc_s390_te_linux64; - -/* Defined in auto-generated file s390-vx-linux64.c. */ -void init_registers_s390_vx_linux64 (void); -extern const struct target_desc *tdesc_s390_vx_linux64; - -/* Defined in auto-generated file s390-tevx-linux64.c. */ -void init_registers_s390_tevx_linux64 (void); -extern const struct target_desc *tdesc_s390_tevx_linux64; - -/* Defined in auto-generated file s390x-linux64.c. */ -void init_registers_s390x_linux64 (void); -extern const struct target_desc *tdesc_s390x_linux64; - -/* Defined in auto-generated file s390x-linux64v1.c. */ -void init_registers_s390x_linux64v1 (void); -extern const struct target_desc *tdesc_s390x_linux64v1; - -/* Defined in auto-generated file s390x-linux64v2.c. */ -void init_registers_s390x_linux64v2 (void); -extern const struct target_desc *tdesc_s390x_linux64v2; - -/* Defined in auto-generated file s390x-te-linux64.c. */ -void init_registers_s390x_te_linux64 (void); -extern const struct target_desc *tdesc_s390x_te_linux64; - -/* Defined in auto-generated file s390x-vx-linux64.c. */ -void init_registers_s390x_vx_linux64 (void); -extern const struct target_desc *tdesc_s390x_vx_linux64; - -/* Defined in auto-generated file s390x-tevx-linux64.c. */ -void init_registers_s390x_tevx_linux64 (void); -extern const struct target_desc *tdesc_s390x_tevx_linux64; - #define s390_num_regs 52 static int s390_regmap[] = { @@ -539,6 +482,7 @@ s390_check_regset (int pid, int regset, int regsize) /* For a 31-bit inferior, whether the kernel supports using the full 64-bit GPRs. */ static int have_hwcap_s390_high_gprs = 0; +static int have_hwcap_s390_vx = 0; static void s390_arch_setup (void) @@ -621,6 +565,8 @@ s390_arch_setup (void) else tdesc = tdesc_s390_linux64; } + + have_hwcap_s390_vx = have_regset_vxrs; } /* Update target_regsets according to available register sets. */ @@ -753,6 +699,708 @@ s390_supports_tracepoints (void) return 1; } +/* Implementation of linux_target_ops method "get_thread_area". */ + +static int +s390_get_thread_area (int lwpid, CORE_ADDR *addrp) +{ + CORE_ADDR res = ptrace (PTRACE_PEEKUSER, lwpid, (long) PT_ACR0, (long) 0); +#ifdef __s390x__ + struct regcache *regcache = get_thread_regcache (current_thread, 0); + + if (register_size (regcache->tdesc, 0) == 4) + res &= 0xffffffffull; +#endif + *addrp = res; + return 0; +} + + +/* Fast tracepoint support. + + The register save area on stack is identical for all targets: + + 0x000+i*0x10: VR0-VR31 + 0x200+i*8: GR0-GR15 + 0x280+i*4: AR0-AR15 + 0x2c0: PSWM [64-bit] + 0x2c8: PSWA [64-bit] + 0x2d0: FPC + + If we're on 31-bit linux, we just don't store the high parts of the GPRs. + Likewise, if there's no VX support, we just store the FRs into the slots + of low VR halves. The agent code is responsible for rearranging that + into regcache. */ + +/* Code sequence saving GPRs for 31-bit target with no high GPRs. There's + one trick used at the very beginning: since there's no way to allocate + stack space without destroying CC (lay instruction can do it, but it's + only supported on later CPUs), we take 4 different execution paths for + every possible value of CC, allocate stack space, save %r0, stuff the + CC value in %r0 (shifted to match its position in PSWM high word), + then branch to common path. */ + +static const unsigned char s390_ft_entry_gpr_esa[] = { + 0xa7, 0x14, 0x00, 0x1e, /* jo .Lcc3 */ + 0xa7, 0x24, 0x00, 0x14, /* jh .Lcc2 */ + 0xa7, 0x44, 0x00, 0x0a, /* jl .Lcc1 */ + /* CC = 0 */ + 0xa7, 0xfa, 0xfd, 0x00, /* ahi %r15, -0x300 */ + 0x50, 0x00, 0xf2, 0x04, /* st %r0, 0x204(%r15) */ + 0xa7, 0x08, 0x00, 0x00, /* lhi %r0, 0 */ + 0xa7, 0xf4, 0x00, 0x18, /* j .Lccdone */ + /* .Lcc1: */ + 0xa7, 0xfa, 0xfd, 0x00, /* ahi %r15, -0x300 */ + 0x50, 0x00, 0xf2, 0x04, /* st %r0, 0x204(%r15) */ + 0xa7, 0x08, 0x10, 0x00, /* lhi %r0, 0x1000 */ + 0xa7, 0xf4, 0x00, 0x10, /* j .Lccdone */ + /* .Lcc2: */ + 0xa7, 0xfa, 0xfd, 0x00, /* ahi %r15, -0x300 */ + 0x50, 0x00, 0xf2, 0x04, /* st %r0, 0x204(%r15) */ + 0xa7, 0x08, 0x20, 0x00, /* lhi %r0, 0x2000 */ + 0xa7, 0xf4, 0x00, 0x08, /* j .Lccdone */ + /* .Lcc3: */ + 0xa7, 0xfa, 0xfd, 0x00, /* ahi %r15, -0x300 */ + 0x50, 0x00, 0xf2, 0x04, /* st %r0, 0x204(%r15) */ + 0xa7, 0x08, 0x30, 0x00, /* lhi %r0, 0x3000 */ + /* .Lccdone: */ + 0x50, 0x10, 0xf2, 0x0c, /* st %r1, 0x20c(%r15) */ + 0x50, 0x20, 0xf2, 0x14, /* st %r2, 0x214(%r15) */ + 0x50, 0x30, 0xf2, 0x1c, /* st %r3, 0x21c(%r15) */ + 0x50, 0x40, 0xf2, 0x24, /* st %r4, 0x224(%r15) */ + 0x50, 0x50, 0xf2, 0x2c, /* st %r5, 0x22c(%r15) */ + 0x50, 0x60, 0xf2, 0x34, /* st %r6, 0x234(%r15) */ + 0x50, 0x70, 0xf2, 0x3c, /* st %r7, 0x23c(%r15) */ + 0x50, 0x80, 0xf2, 0x44, /* st %r8, 0x244(%r15) */ + 0x50, 0x90, 0xf2, 0x4c, /* st %r9, 0x24c(%r15) */ + 0x50, 0xa0, 0xf2, 0x54, /* st %r10, 0x254(%r15) */ + 0x50, 0xb0, 0xf2, 0x5c, /* st %r11, 0x25c(%r15) */ + 0x50, 0xc0, 0xf2, 0x64, /* st %r12, 0x264(%r15) */ + 0x50, 0xd0, 0xf2, 0x6c, /* st %r13, 0x26c(%r15) */ + 0x50, 0xe0, 0xf2, 0x74, /* st %r14, 0x274(%r15) */ + /* Compute original value of %r15 and store it. We use ahi instead + of la to preserve the whole value, and not just the low 31 bits. + This is not particularly important here, but essential in the + zarch case where someone might be using the high word of %r15 + as an extra register. */ + 0x18, 0x1f, /* lr %r1, %r15 */ + 0xa7, 0x1a, 0x03, 0x00, /* ahi %r1, 0x300 */ + 0x50, 0x10, 0xf2, 0x7c, /* st %r1, 0x27c(%r15) */ +}; + +/* Code sequence saving GPRs for 31-bit target with high GPRs and for 64-bit + target. Same as above, except this time we can use load/store multiple, + since the 64-bit regs are tightly packed. */ + +static const unsigned char s390_ft_entry_gpr_zarch[] = { + 0xa7, 0x14, 0x00, 0x21, /* jo .Lcc3 */ + 0xa7, 0x24, 0x00, 0x16, /* jh .Lcc2 */ + 0xa7, 0x44, 0x00, 0x0b, /* jl .Lcc1 */ + /* CC = 0 */ + 0xa7, 0xfb, 0xfd, 0x00, /* aghi %r15, -0x300 */ + 0xeb, 0x0e, 0xf2, 0x00, 0x00, 0x24, /* stmg %r0, %r14, 0x200(%r15) */ + 0xa7, 0x08, 0x00, 0x00, /* lhi %r0, 0 */ + 0xa7, 0xf4, 0x00, 0x1b, /* j .Lccdone */ + /* .Lcc1: */ + 0xa7, 0xfb, 0xfd, 0x00, /* aghi %r15, -0x300 */ + 0xeb, 0x0e, 0xf2, 0x00, 0x00, 0x24, /* stmg %r0, %r14, 0x200(%r15) */ + 0xa7, 0x08, 0x10, 0x00, /* lhi %r0, 0x1000 */ + 0xa7, 0xf4, 0x00, 0x12, /* j .Lccdone */ + /* .Lcc2: */ + 0xa7, 0xfb, 0xfd, 0x00, /* aghi %r15, -0x300 */ + 0xeb, 0x0e, 0xf2, 0x00, 0x00, 0x24, /* stmg %r0, %r14, 0x200(%r15) */ + 0xa7, 0x08, 0x20, 0x00, /* lhi %r0, 0x2000 */ + 0xa7, 0xf4, 0x00, 0x09, /* j .Lccdone */ + /* .Lcc3: */ + 0xa7, 0xfb, 0xfd, 0x00, /* aghi %r15, -0x300 */ + 0xeb, 0x0e, 0xf2, 0x00, 0x00, 0x24, /* stmg %r0, %r14, 0x200(%r15) */ + 0xa7, 0x08, 0x30, 0x00, /* lhi %r0, 0x3000 */ + /* .Lccdone: */ + 0xb9, 0x04, 0x00, 0x1f, /* lgr %r1, %r15 */ + 0xa7, 0x1b, 0x03, 0x00, /* aghi %r1, 0x300 */ + 0xe3, 0x10, 0xf2, 0x78, 0x00, 0x24, /* stg %r1, 0x278(%r15) */ +}; + +/* Code sequence saving ARs, PSWM and FPC. PSWM has to be assembled from + current PSWM (read by epsw) and CC from entry (in %r0). */ + +static const unsigned char s390_ft_entry_misc[] = { + 0x9b, 0x0f, 0xf2, 0x80, /* stam %a0, %a15, 0x20(%%r15) */ + 0xb9, 0x8d, 0x00, 0x23, /* epsw %r2, %r3 */ + 0xa7, 0x18, 0xcf, 0xff, /* lhi %r1, ~0x3000 */ + 0x14, 0x21, /* nr %r2, %r1 */ + 0x16, 0x20, /* or %r2, %r0 */ + 0x50, 0x20, 0xf2, 0xc0, /* st %r2, 0x2c0(%r15) */ + 0x50, 0x30, 0xf2, 0xc4, /* st %r3, 0x2c4(%r15) */ + 0xb2, 0x9c, 0xf2, 0xd0, /* stfpc 0x2d0(%r15) */ +}; + +/* Code sequence saving FRs, used if VX not supported. */ + +static const unsigned char s390_ft_entry_fr[] = { + 0x60, 0x00, 0xf0, 0x00, /* std %f0, 0x000(%r15) */ + 0x60, 0x10, 0xf0, 0x10, /* std %f1, 0x010(%r15) */ + 0x60, 0x20, 0xf0, 0x20, /* std %f2, 0x020(%r15) */ + 0x60, 0x30, 0xf0, 0x30, /* std %f3, 0x030(%r15) */ + 0x60, 0x40, 0xf0, 0x40, /* std %f4, 0x040(%r15) */ + 0x60, 0x50, 0xf0, 0x50, /* std %f5, 0x050(%r15) */ + 0x60, 0x60, 0xf0, 0x60, /* std %f6, 0x060(%r15) */ + 0x60, 0x70, 0xf0, 0x70, /* std %f7, 0x070(%r15) */ + 0x60, 0x80, 0xf0, 0x80, /* std %f8, 0x080(%r15) */ + 0x60, 0x90, 0xf0, 0x90, /* std %f9, 0x090(%r15) */ + 0x60, 0xa0, 0xf0, 0xa0, /* std %f10, 0x0a0(%r15) */ + 0x60, 0xb0, 0xf0, 0xb0, /* std %f11, 0x0b0(%r15) */ + 0x60, 0xc0, 0xf0, 0xc0, /* std %f12, 0x0c0(%r15) */ + 0x60, 0xd0, 0xf0, 0xd0, /* std %f13, 0x0d0(%r15) */ + 0x60, 0xe0, 0xf0, 0xe0, /* std %f14, 0x0e0(%r15) */ + 0x60, 0xf0, 0xf0, 0xf0, /* std %f15, 0x0f0(%r15) */ +}; + +/* Code sequence saving VRs, used if VX not supported. */ + +static const unsigned char s390_ft_entry_vr[] = { + 0xe7, 0x0f, 0xf0, 0x00, 0x00, 0x3e, /* vstm %v0, %v15, 0x000(%r15) */ + 0xe7, 0x0f, 0xf1, 0x00, 0x0c, 0x3e, /* vstm %v16, %v31, 0x100(%r15) */ +}; + +/* Code sequence doing the collection call for 31-bit target. %r1 contains + the address of the literal pool. */ + +static const unsigned char s390_ft_main_31[] = { + /* Load the literals into registers. */ + 0x58, 0x50, 0x10, 0x00, /* l %r5, 0x0(%r1) */ + 0x58, 0x20, 0x10, 0x04, /* l %r2, 0x4(%r1) */ + 0x58, 0x40, 0x10, 0x08, /* l %r4, 0x8(%r1) */ + 0x58, 0x60, 0x10, 0x0c, /* l %r6, 0xc(%r1) */ + /* Save original PSWA (tracepoint address | 0x80000000). */ + 0x50, 0x50, 0xf2, 0xcc, /* st %r5, 0x2cc(%r15) */ + /* Construct a collecting_t object at %r15+0x2e0. */ + 0x50, 0x20, 0xf2, 0xe0, /* st %r2, 0x2e0(%r15) */ + 0x9b, 0x00, 0xf2, 0xe4, /* stam %a0, %a0, 0x2e4(%r15) */ + /* Move its address to %r0. */ + 0x41, 0x00, 0xf2, 0xe0, /* la %r0, 0x2e0(%r15) */ + /* Take the lock. */ + /* .Lloop: */ + 0xa7, 0x18, 0x00, 0x00, /* lhi %r1, 0 */ + 0xba, 0x10, 0x60, 0x00, /* cs %r1, %r0, 0(%r6) */ + 0xa7, 0x74, 0xff, 0xfc, /* jne .Lloop */ + /* Address of the register save block to %r3. */ + 0x18, 0x3f, /* lr %r3, %r15 */ + /* Make a stack frame, so that we can call the collector. */ + 0xa7, 0xfa, 0xff, 0xa0, /* ahi %r15, -0x60 */ + /* Call it. */ + 0x0d, 0xe4, /* basr %r14, %r4 */ + /* And get rid of the stack frame again. */ + 0x41, 0xf0, 0xf0, 0x60, /* la %r15, 0x60(%r15) */ + /* Leave the lock. */ + 0x07, 0xf0, /* br %r0 */ + 0xa7, 0x18, 0x00, 0x00, /* lhi %r1, 0 */ + 0x50, 0x10, 0x60, 0x00, /* st %t1, 0(%r6) */ +}; + +/* Code sequence doing the collection call for 64-bit target. %r1 contains + the address of the literal pool. */ + +static const unsigned char s390_ft_main_64[] = { + /* Load the literals into registers. */ + 0xe3, 0x50, 0x10, 0x00, 0x00, 0x04, /* lg %r5, 0x00(%r1) */ + 0xe3, 0x20, 0x10, 0x08, 0x00, 0x04, /* lg %r2, 0x08(%r1) */ + 0xe3, 0x40, 0x10, 0x10, 0x00, 0x04, /* lg %r4, 0x10(%r1) */ + 0xe3, 0x60, 0x10, 0x18, 0x00, 0x04, /* lg %r6, 0x18(%r1) */ + /* Save original PSWA (tracepoint address). */ + 0xe3, 0x50, 0xf2, 0xc8, 0x00, 0x24, /* stg %r5, 0x2c8(%r15) */ + /* Construct a collecting_t object at %r15+0x2e0. */ + 0xe3, 0x20, 0xf2, 0xe0, 0x00, 0x24, /* stg %r2, 0x2e0(%r15) */ + 0x9b, 0x01, 0xf2, 0xe8, /* stam %a0, %a1, 0x2e8(%r15) */ + /* Move its address to %r0. */ + 0x41, 0x00, 0xf2, 0xe0, /* la %r0, 0x2e0(%r15) */ + /* Take the lock. */ + /* .Lloop: */ + 0xa7, 0x19, 0x00, 0x00, /* lghi %r1, 0 */ + 0xeb, 0x10, 0x60, 0x00, 0x00, 0x30, /* csg %r1, %r0, 0(%r6) */ + 0xa7, 0x74, 0xff, 0xfb, /* jne .Lloop */ + /* Address of the register save block to %r3. */ + 0xb9, 0x04, 0x00, 0x3f, /* lgr %r3, %r15 */ + /* Make a stack frame, so that we can call the collector. */ + 0xa7, 0xfb, 0xff, 0x60, /* aghi %r15, -0xa0 */ + /* Call it. */ + 0x0d, 0xe4, /* basr %r14, %r4 */ + /* And get rid of the stack frame again. */ + 0x41, 0xf0, 0xf0, 0xa0, /* la %r15, 0xa0(%r15) */ + /* Leave the lock. */ + 0x07, 0xf0, /* br %r0 */ + 0xa7, 0x19, 0x00, 0x00, /* lghi %r1, 0 */ + 0xe3, 0x10, 0x60, 0x00, 0x00, 0x24, /* stg %t1, 0(%r6) */ +}; + +/* Code sequence restoring FRs, for targets with no VX support. */ + +static const unsigned char s390_ft_exit_fr[] = { + 0x68, 0x00, 0xf0, 0x00, /* ld %f0, 0x000(%r15) */ + 0x68, 0x10, 0xf0, 0x10, /* ld %f1, 0x010(%r15) */ + 0x68, 0x20, 0xf0, 0x20, /* ld %f2, 0x020(%r15) */ + 0x68, 0x30, 0xf0, 0x30, /* ld %f3, 0x030(%r15) */ + 0x68, 0x40, 0xf0, 0x40, /* ld %f4, 0x040(%r15) */ + 0x68, 0x50, 0xf0, 0x50, /* ld %f5, 0x050(%r15) */ + 0x68, 0x60, 0xf0, 0x60, /* ld %f6, 0x060(%r15) */ + 0x68, 0x70, 0xf0, 0x70, /* ld %f7, 0x070(%r15) */ + 0x68, 0x80, 0xf0, 0x80, /* ld %f8, 0x080(%r15) */ + 0x68, 0x90, 0xf0, 0x90, /* ld %f9, 0x090(%r15) */ + 0x68, 0xa0, 0xf0, 0xa0, /* ld %f10, 0x0a0(%r15) */ + 0x68, 0xb0, 0xf0, 0xb0, /* ld %f11, 0x0b0(%r15) */ + 0x68, 0xc0, 0xf0, 0xc0, /* ld %f12, 0x0c0(%r15) */ + 0x68, 0xd0, 0xf0, 0xd0, /* ld %f13, 0x0d0(%r15) */ + 0x68, 0xe0, 0xf0, 0xe0, /* ld %f14, 0x0e0(%r15) */ + 0x68, 0xf0, 0xf0, 0xf0, /* ld %f15, 0x0f0(%r15) */ +}; + +/* Code sequence restoring VRs. */ + +static const unsigned char s390_ft_exit_vr[] = { + 0xe7, 0x0f, 0xf0, 0x00, 0x00, 0x36, /* vlm %v0, %v15, 0x000(%r15) */ + 0xe7, 0x0f, 0xf1, 0x00, 0x0c, 0x36, /* vlm %v16, %v31, 0x100(%r15) */ +}; + +/* Code sequence restoring misc registers. As for PSWM, only CC should be + modified by C code, so we use the alr instruction to restore it by + manufacturing an operand that'll result in the original flags. */ + +static const unsigned char s390_ft_exit_misc[] = { + 0xb2, 0x9d, 0xf2, 0xd0, /* lfpc 0x2d0(%r15) */ + 0x58, 0x00, 0xf2, 0xc0, /* l %r0, 0x2c0(%r15) */ + /* Extract CC to high 2 bits of %r0. */ + 0x88, 0x00, 0x00, 0x0c, /* srl %r0, 12 */ + 0x89, 0x00, 0x00, 0x1e, /* sll %r0, 30 */ + /* Add %r0 to itself. Result will be nonzero iff CC bit 0 is set, and + will have carry iff CC bit 1 is set - resulting in the same flags + as the original. */ + 0x1e, 0x00, /* alr %r0, %r0 */ + 0x9a, 0x0f, 0xf2, 0x80, /* lam %a0, %a15, 0x280(%r15) */ +}; + +/* Code sequence restoring GPRs, for 31-bit targets with no high GPRs. */ + +static const unsigned char s390_ft_exit_gpr_esa[] = { + 0x58, 0x00, 0xf2, 0x04, /* l %r0, 0x204(%r15) */ + 0x58, 0x10, 0xf2, 0x0c, /* l %r1, 0x20c(%r15) */ + 0x58, 0x20, 0xf2, 0x14, /* l %r2, 0x214(%r15) */ + 0x58, 0x30, 0xf2, 0x1c, /* l %r3, 0x21c(%r15) */ + 0x58, 0x40, 0xf2, 0x24, /* l %r4, 0x224(%r15) */ + 0x58, 0x50, 0xf2, 0x2c, /* l %r5, 0x22c(%r15) */ + 0x58, 0x60, 0xf2, 0x34, /* l %r6, 0x234(%r15) */ + 0x58, 0x70, 0xf2, 0x3c, /* l %r7, 0x23c(%r15) */ + 0x58, 0x80, 0xf2, 0x44, /* l %r8, 0x244(%r15) */ + 0x58, 0x90, 0xf2, 0x4c, /* l %r9, 0x24c(%r15) */ + 0x58, 0xa0, 0xf2, 0x54, /* l %r10, 0x254(%r15) */ + 0x58, 0xb0, 0xf2, 0x5c, /* l %r11, 0x25c(%r15) */ + 0x58, 0xc0, 0xf2, 0x64, /* l %r12, 0x264(%r15) */ + 0x58, 0xd0, 0xf2, 0x6c, /* l %r13, 0x26c(%r15) */ + 0x58, 0xe0, 0xf2, 0x74, /* l %r14, 0x274(%r15) */ + 0x58, 0xf0, 0xf2, 0x7c, /* l %r15, 0x27c(%r15) */ +}; + +/* Code sequence restoring GPRs, for 64-bit targets and 31-bit targets + with high GPRs. */ + +static const unsigned char s390_ft_exit_gpr_zarch[] = { + 0xeb, 0x0f, 0xf2, 0x00, 0x00, 0x04, /* lmg %r0, %r15, 0x200(%r15) */ +}; + +/* Writes instructions to target, updating the to pointer. */ + +static void +append_insns (CORE_ADDR *to, size_t len, const unsigned char *buf) +{ + write_inferior_memory (*to, buf, len); + *to += len; +} + +/* Relocates an instruction from oldloc to *to, updating to. */ + +static int +s390_relocate_instruction (CORE_ADDR *to, CORE_ADDR oldloc, int is_64) +{ + gdb_byte buf[6]; + int ilen; + int op2; + /* 0: no fixup, 1: PC16DBL fixup, 2: PC32DBL fixup. */ + int mode = 0; + int is_bras = 0; + read_inferior_memory (oldloc, buf, sizeof buf); + if (buf[0] < 0x40) + ilen = 2; + else if (buf[0] < 0xc0) + ilen = 4; + else + ilen = 6; + switch (buf[0]) + { + case 0x05: /* BALR */ + case 0x0c: /* BASSM */ + case 0x0d: /* BASR */ + case 0x45: /* BAL */ + case 0x4d: /* BAS */ + /* These save a return address and mess around with registers. + We can't relocate them. */ + return 1; + case 0x84: /* BRXH */ + case 0x85: /* BRXLE */ + mode = 1; + break; + case 0xa7: + op2 = buf[1] & 0xf; + /* BRC, BRAS, BRCT, BRCTG */ + if (op2 >= 4 && op2 <= 7) + mode = 1; + /* BRAS */ + if (op2 == 5) + is_bras = 1; + break; + case 0xc0: + op2 = buf[1] & 0xf; + /* LARL, BRCL, BRASL */ + if (op2 == 0 || op2 == 4 || op2 == 5) + mode = 2; + /* BRASL */ + if (op2 == 5) + is_bras = 1; + break; + case 0xc4: + case 0xc6: + /* PC-relative addressing instructions. */ + mode = 2; + break; + case 0xc5: /* BPRP */ + case 0xc7: /* BPP */ + /* Branch prediction - just skip it. */ + return 0; + case 0xcc: + op2 = buf[1] & 0xf; + /* BRCTH */ + if (op2 == 6) + mode = 2; + break; + case 0xec: + op2 = buf[5]; + switch (op2) + { + case 0x44: /* BRXHG */ + case 0x45: /* BRXLG */ + case 0x64: /* CGRJ */ + case 0x65: /* CLGRJ */ + case 0x76: /* CRJ */ + case 0x77: /* CLRJ */ + mode = 1; + break; + } + break; + } + + if (mode != 0) + { + /* We'll have to relocate an instruction with a PC-relative field. + First, compute the target. */ + int64_t loffset = 0; + CORE_ADDR target; + if (mode == 1) + { + int16_t soffset = 0; + memcpy (&soffset, buf + 2, 2); + loffset = soffset; + } + else if (mode == 2) + { + int32_t soffset = 0; + memcpy (&soffset, buf + 2, 4); + loffset = soffset; + } + target = oldloc + loffset * 2; + if (!is_64) + target &= 0x7fffffff; + + if (is_bras) + { + /* BRAS or BRASL was used. We cannot just relocate those, since + they save the return address in a register. We can, however, + replace them with a LARL+JG sequence. */ + + /* Make the LARL. */ + int32_t soffset; + buf[0] = 0xc0; + buf[1] &= 0xf0; + loffset = oldloc + ilen - *to; + loffset >>= 1; + soffset = loffset; + if (soffset != loffset && is_64) + return 1; + memcpy (buf + 2, &soffset, 4); + append_insns (to, 6, buf); + + /* Note: this is not fully correct. In 31-bit mode, LARL will write + an address with the top bit 0, while BRAS/BRASL will write it + with top bit 1. It should not matter much, since linux compilers + use BR and not BSM to return from functions, but it could confuse + some poor stack unwinder. */ + + /* We'll now be writing a JG. */ + mode = 2; + buf[0] = 0xc0; + buf[1] = 0xf4; + ilen = 6; + } + + /* Compute the new offset and write it to the buffer. */ + loffset = target - *to; + loffset >>= 1; + + if (mode == 1) + { + int16_t soffset = loffset; + if (soffset != loffset) + return 1; + memcpy (buf + 2, &soffset, 2); + } + else if (mode == 2) + { + int32_t soffset = loffset; + if (soffset != loffset && is_64) + return 1; + memcpy (buf + 2, &soffset, 4); + } + } + append_insns (to, ilen, buf); + return 0; +} + +/* Implementation of linux_target_ops method + "install_fast_tracepoint_jump_pad". */ + +static int +s390_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, + CORE_ADDR tpaddr, + CORE_ADDR collector, + CORE_ADDR lockaddr, + ULONGEST orig_size, + CORE_ADDR *jump_entry, + CORE_ADDR *trampoline, + ULONGEST *trampoline_size, + unsigned char *jjump_pad_insn, + ULONGEST *jjump_pad_insn_size, + CORE_ADDR *adjusted_insn_addr, + CORE_ADDR *adjusted_insn_addr_end, + char *err) +{ + int i; + int64_t loffset; + int32_t offset; + unsigned char jbuf[6] = { 0xc0, 0xf4, 0, 0, 0, 0 }; /* jg ... */ + CORE_ADDR buildaddr = *jump_entry; +#ifdef __s390x__ + struct regcache *regcache = get_thread_regcache (current_thread, 0); + int is_64 = register_size (regcache->tdesc, 0) == 8; + int is_zarch = is_64 || have_hwcap_s390_high_gprs; + int has_vx = have_hwcap_s390_vx; +#else + int is_64 = 0, is_zarch = 0, has_vx = 0; +#endif + CORE_ADDR literals[4] = { + tpaddr, + tpoint, + collector, + lockaddr, + }; + + /* First, store the GPRs. */ + if (is_zarch) + append_insns (&buildaddr, sizeof s390_ft_entry_gpr_zarch, + s390_ft_entry_gpr_zarch); + else + append_insns (&buildaddr, sizeof s390_ft_entry_gpr_esa, + s390_ft_entry_gpr_esa); + + /* Second, misc registers (ARs, PSWM, FPC). PSWA will be stored below. */ + append_insns (&buildaddr, sizeof s390_ft_entry_misc, s390_ft_entry_misc); + + /* Third, FRs or VRs. */ + if (has_vx) + append_insns (&buildaddr, sizeof s390_ft_entry_vr, s390_ft_entry_vr); + else + append_insns (&buildaddr, sizeof s390_ft_entry_fr, s390_ft_entry_fr); + + /* Now, the main part of code - store PSWA, take lock, call collector, + leave lock. First, we'll need to fetch 4 literals. */ + if (is_64) { + unsigned char buf[] = { + 0x07, 0x07, /* nopr %r7 */ + 0x07, 0x07, /* nopr %r7 */ + 0x07, 0x07, /* nopr %r7 */ + 0xa7, 0x15, 0x00, 0x12, /* bras %r1, .Lend */ + 0, 0, 0, 0, 0, 0, 0, 0, /* tpaddr */ + 0, 0, 0, 0, 0, 0, 0, 0, /* tpoint */ + 0, 0, 0, 0, 0, 0, 0, 0, /* collector */ + 0, 0, 0, 0, 0, 0, 0, 0, /* lockaddr */ + /* .Lend: */ + }; + /* Find the proper start place in buf, so that literals will be + aligned. */ + int bufpos = (buildaddr + 2) & 7; + /* Stuff the literals into the buffer. */ + for (i = 0; i < 4; i++) { + uint64_t lit = literals[i]; + memcpy (&buf[sizeof buf - 32 + i * 8], &lit, 8); + } + append_insns (&buildaddr, sizeof buf - bufpos, buf + bufpos); + append_insns (&buildaddr, sizeof s390_ft_main_64, s390_ft_main_64); + } else { + unsigned char buf[] = { + 0x07, 0x07, /* nopr %r7 */ + 0xa7, 0x15, 0x00, 0x0a, /* bras %r1, .Lend */ + 0, 0, 0, 0, /* tpaddr */ + 0, 0, 0, 0, /* tpoint */ + 0, 0, 0, 0, /* collector */ + 0, 0, 0, 0, /* lockaddr */ + /* .Lend: */ + }; + /* Find the proper start place in buf, so that literals will be + aligned. */ + int bufpos = (buildaddr + 2) & 3; + /* First literal will be saved as the PSWA, make sure it has the high bit + set. */ + literals[0] |= 0x80000000; + /* Stuff the literals into the buffer. */ + for (i = 0; i < 4; i++) { + uint32_t lit = literals[i]; + memcpy (&buf[sizeof buf - 16 + i * 4], &lit, 4); + } + append_insns (&buildaddr, sizeof buf - bufpos, buf + bufpos); + append_insns (&buildaddr, sizeof s390_ft_main_31, s390_ft_main_31); + } + + /* Restore FRs or VRs. */ + if (has_vx) + append_insns (&buildaddr, sizeof s390_ft_exit_vr, s390_ft_exit_vr); + else + append_insns (&buildaddr, sizeof s390_ft_exit_fr, s390_ft_exit_fr); + + /* Restore misc registers. */ + append_insns (&buildaddr, sizeof s390_ft_exit_misc, s390_ft_exit_misc); + + /* Restore the GPRs. */ + if (is_zarch) + append_insns (&buildaddr, sizeof s390_ft_exit_gpr_zarch, + s390_ft_exit_gpr_zarch); + else + append_insns (&buildaddr, sizeof s390_ft_exit_gpr_esa, + s390_ft_exit_gpr_esa); + + /* Now, adjust the original instruction to execute in the jump + pad. */ + *adjusted_insn_addr = buildaddr; + if (s390_relocate_instruction (&buildaddr, tpaddr, is_64)) + { + sprintf (err, "E.Could not relocate instruction for tracepoint."); + return 1; + } + *adjusted_insn_addr_end = buildaddr; + + /* Finally, write a jump back to the program. */ + + loffset = (tpaddr + orig_size) - buildaddr; + loffset >>= 1; + offset = loffset; + if (is_64 && offset != loffset) + { + sprintf (err, + "E.Jump back from jump pad too far from tracepoint " + "(offset 0x%" PRIx64 " > int33).", loffset); + return 1; + } + memcpy (jbuf + 2, &offset, 4); + append_insns (&buildaddr, sizeof jbuf, jbuf); + + /* The jump pad is now built. Wire in a jump to our jump pad. This + is always done last (by our caller actually), so that we can + install fast tracepoints with threads running. This relies on + the agent's atomic write support. */ + loffset = *jump_entry - tpaddr; + loffset >>= 1; + offset = loffset; + if (is_64 && offset != loffset) + { + sprintf (err, + "E.Jump back from jump pad too far from tracepoint " + "(offset 0x%" PRIx64 " > int33).", loffset); + return 1; + } + memcpy (jbuf + 2, &offset, 4); + memcpy (jjump_pad_insn, jbuf, sizeof jbuf); + *jjump_pad_insn_size = sizeof jbuf; + + /* Return the end address of our pad. */ + *jump_entry = buildaddr; + + return 0; +} + +/* Implementation of linux_target_ops method + "get_min_fast_tracepoint_insn_len". */ + +static int +s390_get_min_fast_tracepoint_insn_len (void) +{ + /* We only support using 6-byte jumps to reach the tracepoint code. + If the tracepoint buffer were allocated sufficiently close (64kiB) + to the executable code, and the traced instruction itself was close + enough to the beginning, we could use 4-byte jumps, but this doesn't + seem to be worth the effort. */ + return 6; +} + +/* Implementation of linux_target_ops method "get_ipa_tdesc_idx". */ + +static int +s390_get_ipa_tdesc_idx (void) +{ + struct regcache *regcache = get_thread_regcache (current_thread, 0); + const struct target_desc *tdesc = regcache->tdesc; + +#ifdef __s390x__ + if (tdesc == tdesc_s390x_linux64) + return S390_TDESC_64; + if (tdesc == tdesc_s390x_linux64v1) + return S390_TDESC_64V1; + if (tdesc == tdesc_s390x_linux64v2) + return S390_TDESC_64V2; + if (tdesc == tdesc_s390x_te_linux64) + return S390_TDESC_TE; + if (tdesc == tdesc_s390x_vx_linux64) + return S390_TDESC_VX; + if (tdesc == tdesc_s390x_tevx_linux64) + return S390_TDESC_TEVX; +#endif + + if (tdesc == tdesc_s390_linux32) + return S390_TDESC_32; + if (tdesc == tdesc_s390_linux32v1) + return S390_TDESC_32V1; + if (tdesc == tdesc_s390_linux32v2) + return S390_TDESC_32V2; + if (tdesc == tdesc_s390_linux64) + return S390_TDESC_64; + if (tdesc == tdesc_s390_linux64v1) + return S390_TDESC_64V1; + if (tdesc == tdesc_s390_linux64v2) + return S390_TDESC_64V2; + if (tdesc == tdesc_s390_te_linux64) + return S390_TDESC_TE; + if (tdesc == tdesc_s390_vx_linux64) + return S390_TDESC_VX; + if (tdesc == tdesc_s390_tevx_linux64) + return S390_TDESC_TEVX; + + return 0; +} + struct linux_target_ops the_low_target = { s390_arch_setup, s390_regs_info, @@ -780,13 +1428,15 @@ struct linux_target_ops the_low_target = { NULL, /* prepare_to_resume */ NULL, /* process_qsupported */ s390_supports_tracepoints, - NULL, /* get_thread_area */ - NULL, /* install_fast_tracepoint_jump_pad */ + s390_get_thread_area, + s390_install_fast_tracepoint_jump_pad, NULL, /* emit_ops */ - NULL, /* get_min_fast_tracepoint_insn_len */ + s390_get_min_fast_tracepoint_insn_len, NULL, /* supports_range_stepping */ NULL, /* breakpoint_kind_from_current_state */ s390_supports_hardware_single_step, + NULL, /* get_syscall_trapinfo */ + s390_get_ipa_tdesc_idx, }; void @@ -803,12 +1453,14 @@ initialize_low_arch (void) init_registers_s390_te_linux64 (); init_registers_s390_vx_linux64 (); init_registers_s390_tevx_linux64 (); +#ifdef __s390x__ init_registers_s390x_linux64 (); init_registers_s390x_linux64v1 (); init_registers_s390x_linux64v2 (); init_registers_s390x_te_linux64 (); init_registers_s390x_vx_linux64 (); init_registers_s390x_tevx_linux64 (); +#endif initialize_regsets_info (&s390_regsets_info); initialize_regsets_info (&s390_regsets_info_3264); diff --git a/gdb/gdbserver/linux-s390-tdesc.h b/gdb/gdbserver/linux-s390-tdesc.h new file mode 100644 index 0000000..501cc88 --- /dev/null +++ b/gdb/gdbserver/linux-s390-tdesc.h @@ -0,0 +1,102 @@ +/* Low level support for s390, shared between gdbserver and IPA. + + Copyright (C) 2016 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +/* Note: since IPA obviously knows what ABI it's running on (s390 vs s390x), + it's sufficient to pass only the register set here. This, together with + the ABI known at IPA compile time, maps to a tdesc. */ + +enum s390_linux_tdesc { + S390_TDESC_32, + S390_TDESC_32V1, + S390_TDESC_32V2, + S390_TDESC_64, + S390_TDESC_64V1, + S390_TDESC_64V2, + S390_TDESC_TE, + S390_TDESC_VX, + S390_TDESC_TEVX, +}; + +#ifdef __s390x__ + +/* Defined in auto-generated file s390x-linux64.c. */ +void init_registers_s390x_linux64 (void); +extern const struct target_desc *tdesc_s390x_linux64; + +/* Defined in auto-generated file s390x-linux64v1.c. */ +void init_registers_s390x_linux64v1 (void); +extern const struct target_desc *tdesc_s390x_linux64v1; + +/* Defined in auto-generated file s390x-linux64v2.c. */ +void init_registers_s390x_linux64v2 (void); +extern const struct target_desc *tdesc_s390x_linux64v2; + +/* Defined in auto-generated file s390x-te-linux64.c. */ +void init_registers_s390x_te_linux64 (void); +extern const struct target_desc *tdesc_s390x_te_linux64; + +/* Defined in auto-generated file s390x-vx-linux64.c. */ +void init_registers_s390x_vx_linux64 (void); +extern const struct target_desc *tdesc_s390x_vx_linux64; + +/* Defined in auto-generated file s390x-tevx-linux64.c. */ +void init_registers_s390x_tevx_linux64 (void); +extern const struct target_desc *tdesc_s390x_tevx_linux64; + +#endif + +#if !defined __s390x__ || !defined IN_PROCESS_AGENT + +/* Defined in auto-generated file s390-linux32.c. */ +void init_registers_s390_linux32 (void); +extern const struct target_desc *tdesc_s390_linux32; + +/* Defined in auto-generated file s390-linux32v1.c. */ +void init_registers_s390_linux32v1 (void); +extern const struct target_desc *tdesc_s390_linux32v1; + +/* Defined in auto-generated file s390-linux32v2.c. */ +void init_registers_s390_linux32v2 (void); +extern const struct target_desc *tdesc_s390_linux32v2; + +/* Defined in auto-generated file s390-linux64.c. */ +void init_registers_s390_linux64 (void); +extern const struct target_desc *tdesc_s390_linux64; + +/* Defined in auto-generated file s390-linux64v1.c. */ +void init_registers_s390_linux64v1 (void); +extern const struct target_desc *tdesc_s390_linux64v1; + +/* Defined in auto-generated file s390-linux64v2.c. */ +void init_registers_s390_linux64v2 (void); +extern const struct target_desc *tdesc_s390_linux64v2; + +/* Defined in auto-generated file s390-te-linux64.c. */ +void init_registers_s390_te_linux64 (void); +extern const struct target_desc *tdesc_s390_te_linux64; + +/* Defined in auto-generated file s390-vx-linux64.c. */ +void init_registers_s390_vx_linux64 (void); +extern const struct target_desc *tdesc_s390_vx_linux64; + +/* Defined in auto-generated file s390-tevx-linux64.c. */ +void init_registers_s390_tevx_linux64 (void); +extern const struct target_desc *tdesc_s390_tevx_linux64; + +#endif