From: Andy Walls Date: Sun, 14 Dec 2008 22:21:35 +0000 (-0300) Subject: V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issues X-Git-Tag: v3.12-rc1~16854^2~188 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=aafc77066f4cc8b6de4af1a7d643c9646e19bad9;p=kernel%2Fkernel-generic.git V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issues VBI comment corrections to avoid future confusion about standards. Comments on cx18 VBI implementation shortcomings that need resolution. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 863ebf0..d7baf1b 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -609,18 +609,21 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line * length of 720 pixels @ 4:2:2 sampling. Thus... * - * For NTSC: + * For systems that use a 15.734 kHz horizontal rate, such as + * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have: * - * (1/15,734 kHz) * 2 * 13.5 MHz = 1716 samples/line = + * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line = * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples * - * For PAL: + * For systems that use a 15.625 kHz horizontal rate, such as + * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have: * - * (1/15,625 kHz) * 2 * 13.5 MHz = 1728 samples/line = + * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line = * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples * */ + /* FIXME: init these based on tuner std & modify when std changes */ /* CX18-AV-Core number of VBI samples output per horizontal line */ cx->vbi.raw_decoder_line_size = 1444; /* 4 byte SAV + 2 * 720 */ cx->vbi.sliced_decoder_line_size = 272; /* 60 Hz: 268+4, 50 Hz: 280+4 */ @@ -924,6 +927,11 @@ static int __devinit cx18_probe(struct pci_dev *dev, } cx->params.video_gop_size = cx->is_60hz ? 15 : 12; + /* + * FIXME: setting the buffer size based on the tuner standard is + * suboptimal, as the CVBS and SVideo inputs could use a different std + * and the buffer could end up being too small in that case. + */ vbi_buf_size = cx->vbi.raw_size * (cx->is_60hz ? 24 : 36) / 2; cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_buf_size;