From: James Bottomley Date: Tue, 7 May 2013 21:44:06 +0000 (-0700) Subject: [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type X-Git-Tag: v3.10-rc1~3^2~1^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=aa9f8328fc51460e15da129caf622b6560fa8c99;p=platform%2Fkernel%2Flinux-exynos.git [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c index 64136c56e706..33072388ea16 100644 --- a/drivers/scsi/aic94xx/aic94xx_dev.c +++ b/drivers/scsi/aic94xx/aic94xx_dev.c @@ -84,7 +84,7 @@ static void asd_set_ddb_type(struct domain_device *dev) struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; int ddb = (int) (unsigned long) dev->lldd_dev; - if (dev->dev_type == SATA_PM_PORT) + if (dev->dev_type == SAS_SATA_PM_PORT) asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT); else if (dev->tproto) asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET); @@ -116,7 +116,7 @@ void asd_set_dmamode(struct domain_device *dev) int ddb = (int) (unsigned long) dev->lldd_dev; u32 qdepth = 0; - if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) { + if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM_PORT) { if (ata_id_has_ncq(ata_dev->id)) qdepth = ata_id_queue_depth(ata_dev->id); asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK, @@ -140,8 +140,8 @@ static int asd_init_sata(struct domain_device *dev) int ddb = (int) (unsigned long) dev->lldd_dev; asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF); - if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || - dev->dev_type == SATA_PM_PORT) { + if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM || + dev->dev_type == SAS_SATA_PM_PORT) { struct dev_to_host_fis *fis = (struct dev_to_host_fis *) dev->frame_rcvd; asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status); @@ -174,7 +174,7 @@ static int asd_init_target_ddb(struct domain_device *dev) asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask); if (dev->port->oob_mode != SATA_OOB_MODE) { flags |= OPEN_REQUIRED; - if ((dev->dev_type == SATA_DEV) || + if ((dev->dev_type == SAS_SATA_DEV) || (dev->tproto & SAS_PROTOCOL_STP)) { struct smp_resp *rps_resp = &dev->sata_dev.rps_resp; if (rps_resp->frame_type == SMP_RESPONSE && @@ -188,8 +188,8 @@ static int asd_init_target_ddb(struct domain_device *dev) } else { flags |= CONCURRENT_CONN_SUPP; if (!dev->parent && - (dev->dev_type == EDGE_DEV || - dev->dev_type == FANOUT_DEV)) + (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || + dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)) asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN, 4); else @@ -198,7 +198,7 @@ static int asd_init_target_ddb(struct domain_device *dev) asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1); } } - if (dev->dev_type == SATA_PM) + if (dev->dev_type == SAS_SATA_PM) flags |= SATA_MULTIPORT; asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags); @@ -211,7 +211,7 @@ static int asd_init_target_ddb(struct domain_device *dev) asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF); asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF); - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { i = asd_init_sata(dev); if (i < 0) { asd_free_ddb(asd_ha, ddb); @@ -219,7 +219,7 @@ static int asd_init_target_ddb(struct domain_device *dev) } } - if (dev->dev_type == SAS_END_DEV) { + if (dev->dev_type == SAS_END_DEVICE) { struct sas_end_device *rdev = rphy_to_end_device(dev->rphy); if (rdev->I_T_nexus_loss_timeout > 0) asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT, @@ -328,10 +328,10 @@ int asd_dev_found(struct domain_device *dev) spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags); switch (dev->dev_type) { - case SATA_PM: + case SAS_SATA_PM: res = asd_init_sata_pm_ddb(dev); break; - case SATA_PM_PORT: + case SAS_SATA_PM_PORT: res = asd_init_sata_pm_port_ddb(dev); break; default: diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c index 81b736c76fff..4df867e07b20 100644 --- a/drivers/scsi/aic94xx/aic94xx_hwi.c +++ b/drivers/scsi/aic94xx/aic94xx_hwi.c @@ -74,7 +74,7 @@ static void asd_init_phy_identify(struct asd_phy *phy) memset(phy->identify_frame, 0, sizeof(*phy->identify_frame)); - phy->identify_frame->dev_type = SAS_END_DEV; + phy->identify_frame->dev_type = SAS_END_DEVICE; if (phy->sas_phy.role & PHY_ROLE_INITIATOR) phy->identify_frame->initiator_bits = phy->sas_phy.iproto; if (phy->sas_phy.role & PHY_ROLE_TARGET) diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index cf9040933da6..d4c35df3d4ae 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -184,7 +184,7 @@ int asd_I_T_nexus_reset(struct domain_device *dev) struct sas_phy *phy = sas_get_local_phy(dev); /* Standard mandates link reset for ATA (type 0) and * hard reset for SSP (type 1) */ - int reset_type = (dev->dev_type == SATA_DEV || + int reset_type = (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1; asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index c3aa6c5457b9..96a26f454673 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1085,7 +1085,7 @@ static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *s struct isci_host *ihost = idev->owning_port->owning_controller; struct domain_device *dev = idev->domain_dev; - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { + if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { sci_change_state(&idev->sm, SCI_STP_DEV_IDLE); } else if (dev_is_expander(dev)) { sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); @@ -1098,7 +1098,7 @@ static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); struct domain_device *dev = idev->domain_dev; - if (dev->dev_type == SAS_END_DEV) { + if (dev->dev_type == SAS_END_DEVICE) { struct isci_host *ihost = idev->owning_port->owning_controller; isci_remote_device_not_ready(ihost, idev, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 7674caae1d88..47a013fffae7 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -297,7 +297,7 @@ static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_conte static inline bool dev_is_expander(struct domain_device *dev) { - return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; + return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE; } static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 9594ab62702b..e3e3bcbd5a9f 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2978,7 +2978,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm) /* all unaccelerated request types (non ssp or ncq) handled with * substates */ - if (!task && dev->dev_type == SAS_END_DEV) { + if (!task && dev->dev_type == SAS_END_DEVICE) { state = SCI_REQ_TASK_WAIT_TC_COMP; } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { state = SCI_REQ_SMP_WAIT_RESP; @@ -3101,7 +3101,7 @@ sci_io_request_construct(struct isci_host *ihost, if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; - if (dev->dev_type == SAS_END_DEV) + if (dev->dev_type == SAS_END_DEVICE) /* pass */; else if (dev_is_sata(dev)) memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); @@ -3125,7 +3125,7 @@ enum sci_status sci_task_request_construct(struct isci_host *ihost, /* Build the common part of the request */ sci_general_request_construct(ihost, idev, ireq); - if (dev->dev_type == SAS_END_DEV || dev_is_sata(dev)) { + if (dev->dev_type == SAS_END_DEVICE || dev_is_sata(dev)) { set_bit(IREQ_TMF, &ireq->flags); memset(ireq->tc, 0, sizeof(struct scu_task_context)); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index b6f19a1db780..9bb020ac089c 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -250,7 +250,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, } /* XXX convert to get this from task->tproto like other drivers */ - if (dev->dev_type == SAS_END_DEV) { + if (dev->dev_type == SAS_END_DEVICE) { isci_tmf->proto = SAS_PROTOCOL_SSP; status = sci_task_request_construct_ssp(ireq); if (status != SCI_SUCCESS) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index bdb81cda8401..161c98efade9 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -285,14 +285,14 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) if (phy->attached_tproto & SAS_PROTOCOL_STP) dev->tproto = phy->attached_tproto; if (phy->attached_sata_dev) - dev->tproto |= SATA_DEV; + dev->tproto |= SAS_SATA_DEV; - if (phy->attached_dev_type == SATA_PENDING) - dev->dev_type = SATA_PENDING; + if (phy->attached_dev_type == SAS_SATA_PENDING) + dev->dev_type = SAS_SATA_PENDING; else { int res; - dev->dev_type = SATA_DEV; + dev->dev_type = SAS_SATA_DEV; res = sas_get_report_phy_sata(dev->parent, phy->phy_id, &dev->sata_dev.rps_resp); if (res) { @@ -314,7 +314,7 @@ static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) int res; /* we weren't pending, so successfully end the reset sequence now */ - if (dev->dev_type != SATA_PENDING) + if (dev->dev_type != SAS_SATA_PENDING) return 1; /* hmmm, if this succeeds do we need to repost the domain_device to the @@ -348,9 +348,9 @@ static int smp_ata_check_ready(struct ata_link *link) return 0; switch (ex_phy->attached_dev_type) { - case SATA_PENDING: + case SAS_SATA_PENDING: return 0; - case SAS_END_DEV: + case SAS_END_DEVICE: if (ex_phy->attached_sata_dev) return sas_ata_clear_pending(dev, ex_phy); default: @@ -631,7 +631,7 @@ static void sas_get_ata_command_set(struct domain_device *dev) struct dev_to_host_fis *fis = (struct dev_to_host_fis *) dev->frame_rcvd; - if (dev->dev_type == SATA_PENDING) + if (dev->dev_type == SAS_SATA_PENDING) return; if ((fis->sector_count == 1 && /* ATA */ @@ -797,7 +797,7 @@ int sas_discover_sata(struct domain_device *dev) { int res; - if (dev->dev_type == SATA_PM) + if (dev->dev_type == SAS_SATA_PM) return -ENODEV; sas_get_ata_command_set(dev); diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index a0c3003e0c7d..62b58d38ce2e 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -39,11 +39,11 @@ void sas_init_dev(struct domain_device *dev) { switch (dev->dev_type) { - case SAS_END_DEV: + case SAS_END_DEVICE: INIT_LIST_HEAD(&dev->ssp_dev.eh_list_node); break; - case EDGE_DEV: - case FANOUT_DEV: + case SAS_EDGE_EXPANDER_DEVICE: + case SAS_FANOUT_EXPANDER_DEVICE: INIT_LIST_HEAD(&dev->ex_dev.children); mutex_init(&dev->ex_dev.cmd_mutex); break; @@ -93,9 +93,9 @@ static int sas_get_port_device(struct asd_sas_port *port) if (fis->interrupt_reason == 1 && fis->lbal == 1 && fis->byte_count_low==0x69 && fis->byte_count_high == 0x96 && (fis->device & ~0x10) == 0) - dev->dev_type = SATA_PM; + dev->dev_type = SAS_SATA_PM; else - dev->dev_type = SATA_DEV; + dev->dev_type = SAS_SATA_DEV; dev->tproto = SAS_PROTOCOL_SATA; } else { struct sas_identify_frame *id = @@ -109,21 +109,21 @@ static int sas_get_port_device(struct asd_sas_port *port) dev->port = port; switch (dev->dev_type) { - case SATA_DEV: + case SAS_SATA_DEV: rc = sas_ata_init(dev); if (rc) { rphy = NULL; break; } /* fall through */ - case SAS_END_DEV: + case SAS_END_DEVICE: rphy = sas_end_device_alloc(port->port); break; - case EDGE_DEV: + case SAS_EDGE_EXPANDER_DEVICE: rphy = sas_expander_alloc(port->port, SAS_EDGE_EXPANDER_DEVICE); break; - case FANOUT_DEV: + case SAS_FANOUT_EXPANDER_DEVICE: rphy = sas_expander_alloc(port->port, SAS_FANOUT_EXPANDER_DEVICE); break; @@ -156,7 +156,7 @@ static int sas_get_port_device(struct asd_sas_port *port) dev->rphy = rphy; get_device(&dev->rphy->dev); - if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV) + if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEVICE) list_add_tail(&dev->disco_list_node, &port->disco_list); else { spin_lock_irq(&port->dev_list_lock); @@ -315,7 +315,7 @@ void sas_free_device(struct kref *kref) dev->phy = NULL; /* remove the phys and ports, everything else should be gone */ - if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) + if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) kfree(dev->ex_dev.ex_phy); if (dev_is_sata(dev) && dev->sata_dev.ap) { @@ -343,7 +343,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d spin_unlock_irq(&port->dev_list_lock); spin_lock_irq(&ha->lock); - if (dev->dev_type == SAS_END_DEV && + if (dev->dev_type == SAS_END_DEVICE && !list_empty(&dev->ssp_dev.eh_list_node)) { list_del_init(&dev->ssp_dev.eh_list_node); ha->eh_active--; @@ -457,15 +457,15 @@ static void sas_discover_domain(struct work_struct *work) task_pid_nr(current)); switch (dev->dev_type) { - case SAS_END_DEV: + case SAS_END_DEVICE: error = sas_discover_end_dev(dev); break; - case EDGE_DEV: - case FANOUT_DEV: + case SAS_EDGE_EXPANDER_DEVICE: + case SAS_FANOUT_EXPANDER_DEVICE: error = sas_discover_root_expander(dev); break; - case SATA_DEV: - case SATA_PM: + case SAS_SATA_DEV: + case SAS_SATA_PM: #ifdef CONFIG_SCSI_SAS_ATA error = sas_discover_sata(dev); break; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 55cbd0180159..74cc4a02092e 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -183,21 +183,21 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy) } } -static enum sas_dev_type to_dev_type(struct discover_resp *dr) +static enum sas_device_type to_dev_type(struct discover_resp *dr) { /* This is detecting a failure to transmit initial dev to host * FIS as described in section J.5 of sas-2 r16 */ - if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev && + if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev && dr->linkrate >= SAS_LINK_RATE_1_5_GBPS) - return SATA_PENDING; + return SAS_SATA_PENDING; else return dr->attached_dev_type; } static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) { - enum sas_dev_type dev_type; + enum sas_device_type dev_type; enum sas_linkrate linkrate; u8 sas_addr[SAS_ADDR_SIZE]; struct smp_resp *resp = rsp; @@ -238,7 +238,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) /* Handle vacant phy - rest of dr data is not valid so skip it */ if (phy->phy_state == PHY_VACANT) { memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); - phy->attached_dev_type = NO_DEVICE; + phy->attached_dev_type = SAS_PHY_UNUSED; if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) { phy->phy_id = phy_id; goto skip; @@ -259,7 +259,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) /* help some expanders that fail to zero sas_address in the 'no * device' case */ - if (phy->attached_dev_type == NO_DEVICE || + if (phy->attached_dev_type == SAS_PHY_UNUSED || phy->linkrate < SAS_LINK_RATE_1_5_GBPS) memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); else @@ -292,13 +292,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) out: switch (phy->attached_dev_type) { - case SATA_PENDING: + case SAS_SATA_PENDING: type = "stp pending"; break; - case NO_DEVICE: + case SAS_PHY_UNUSED: type = "no device"; break; - case SAS_END_DEV: + case SAS_END_DEVICE: if (phy->attached_iproto) { if (phy->attached_tproto) type = "host+target"; @@ -311,8 +311,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) type = "ssp"; } break; - case EDGE_DEV: - case FANOUT_DEV: + case SAS_EDGE_EXPANDER_DEVICE: + case SAS_FANOUT_EXPANDER_DEVICE: type = "smp"; break; default: @@ -833,7 +833,7 @@ static struct domain_device *sas_ex_discover_end_dev( } else #endif if (phy->attached_tproto & SAS_PROTOCOL_SSP) { - child->dev_type = SAS_END_DEV; + child->dev_type = SAS_END_DEVICE; rphy = sas_end_device_alloc(phy->port); /* FIXME: error handling */ if (unlikely(!rphy)) @@ -932,11 +932,11 @@ static struct domain_device *sas_ex_discover_expander( switch (phy->attached_dev_type) { - case EDGE_DEV: + case SAS_EDGE_EXPANDER_DEVICE: rphy = sas_expander_alloc(phy->port, SAS_EDGE_EXPANDER_DEVICE); break; - case FANOUT_DEV: + case SAS_FANOUT_EXPANDER_DEVICE: rphy = sas_expander_alloc(phy->port, SAS_FANOUT_EXPANDER_DEVICE); break; @@ -1013,7 +1013,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) sas_ex_disable_port(dev, ex_phy->attached_sas_addr); - if (ex_phy->attached_dev_type == NO_DEVICE) { + if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) { if (ex_phy->routing_attr == DIRECT_ROUTING) { memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); sas_configure_routing(dev, ex_phy->attached_sas_addr); @@ -1022,10 +1022,10 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) return 0; - if (ex_phy->attached_dev_type != SAS_END_DEV && - ex_phy->attached_dev_type != FANOUT_DEV && - ex_phy->attached_dev_type != EDGE_DEV && - ex_phy->attached_dev_type != SATA_PENDING) { + if (ex_phy->attached_dev_type != SAS_END_DEVICE && + ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE && + ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE && + ex_phy->attached_dev_type != SAS_SATA_PENDING) { SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " "phy 0x%x\n", ex_phy->attached_dev_type, SAS_ADDR(dev->sas_addr), @@ -1049,11 +1049,11 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) } switch (ex_phy->attached_dev_type) { - case SAS_END_DEV: - case SATA_PENDING: + case SAS_END_DEVICE: + case SAS_SATA_PENDING: child = sas_ex_discover_end_dev(dev, phy_id); break; - case FANOUT_DEV: + case SAS_FANOUT_EXPANDER_DEVICE: if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { SAS_DPRINTK("second fanout expander %016llx phy 0x%x " "attached to ex %016llx phy 0x%x\n", @@ -1067,7 +1067,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) memcpy(dev->port->disc.fanout_sas_addr, ex_phy->attached_sas_addr, SAS_ADDR_SIZE); /* fallthrough */ - case EDGE_DEV: + case SAS_EDGE_EXPANDER_DEVICE: child = sas_ex_discover_expander(dev, phy_id); break; default: @@ -1111,8 +1111,8 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) phy->phy_state == PHY_NOT_PRESENT) continue; - if ((phy->attached_dev_type == EDGE_DEV || - phy->attached_dev_type == FANOUT_DEV) && + if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE || + phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) && phy->routing_attr == SUBTRACTIVE_ROUTING) { memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); @@ -1130,8 +1130,8 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev) u8 sub_addr[8] = {0, }; list_for_each_entry(child, &ex->children, siblings) { - if (child->dev_type != EDGE_DEV && - child->dev_type != FANOUT_DEV) + if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE && + child->dev_type != SAS_FANOUT_EXPANDER_DEVICE) continue; if (sub_addr[0] == 0) { sas_find_sub_addr(child, sub_addr); @@ -1208,7 +1208,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev) int i; u8 *sub_sas_addr = NULL; - if (dev->dev_type != EDGE_DEV) + if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE) return 0; for (i = 0; i < ex->num_phys; i++) { @@ -1218,8 +1218,8 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev) phy->phy_state == PHY_NOT_PRESENT) continue; - if ((phy->attached_dev_type == FANOUT_DEV || - phy->attached_dev_type == EDGE_DEV) && + if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE || + phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) && phy->routing_attr == SUBTRACTIVE_ROUTING) { if (!sub_sas_addr) @@ -1245,8 +1245,8 @@ static void sas_print_parent_topology_bug(struct domain_device *child, struct ex_phy *child_phy) { static const char *ex_type[] = { - [EDGE_DEV] = "edge", - [FANOUT_DEV] = "fanout", + [SAS_EDGE_EXPANDER_DEVICE] = "edge", + [SAS_FANOUT_EXPANDER_DEVICE] = "fanout", }; struct domain_device *parent = child->parent; @@ -1321,8 +1321,8 @@ static int sas_check_parent_topology(struct domain_device *child) if (!child->parent) return 0; - if (child->parent->dev_type != EDGE_DEV && - child->parent->dev_type != FANOUT_DEV) + if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE && + child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE) return 0; parent_ex = &child->parent->ex_dev; @@ -1341,8 +1341,8 @@ static int sas_check_parent_topology(struct domain_device *child) child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; switch (child->parent->dev_type) { - case EDGE_DEV: - if (child->dev_type == FANOUT_DEV) { + case SAS_EDGE_EXPANDER_DEVICE: + if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || child_phy->routing_attr != TABLE_ROUTING) { sas_print_parent_topology_bug(child, parent_phy, child_phy); @@ -1366,7 +1366,7 @@ static int sas_check_parent_topology(struct domain_device *child) } } break; - case FANOUT_DEV: + case SAS_FANOUT_EXPANDER_DEVICE: if (parent_phy->routing_attr != TABLE_ROUTING || child_phy->routing_attr != SUBTRACTIVE_ROUTING) { sas_print_parent_topology_bug(child, parent_phy, child_phy); @@ -1619,8 +1619,8 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) struct domain_device *dev; list_for_each_entry(dev, &port->dev_list, dev_list_node) { - if (dev->dev_type == EDGE_DEV || - dev->dev_type == FANOUT_DEV) { + if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || + dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); @@ -1720,7 +1720,7 @@ static int sas_get_phy_change_count(struct domain_device *dev, } static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id, - u8 *sas_addr, enum sas_dev_type *type) + u8 *sas_addr, enum sas_device_type *type) { int res; struct smp_resp *disc_resp; @@ -1849,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev, SAS_DPRINTK("Expander phys DID NOT change\n"); } list_for_each_entry(ch, &ex->children, siblings) { - if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) { + if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { res = sas_find_bcast_dev(ch, src_dev); if (*src_dev) return res; @@ -1866,8 +1866,8 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi list_for_each_entry_safe(child, n, &ex->children, siblings) { set_bit(SAS_DEV_GONE, &child->state); - if (child->dev_type == EDGE_DEV || - child->dev_type == FANOUT_DEV) + if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || + child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) sas_unregister_ex_tree(port, child); else sas_unregister_dev(port, child); @@ -1887,8 +1887,8 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, if (SAS_ADDR(child->sas_addr) == SAS_ADDR(phy->attached_sas_addr)) { set_bit(SAS_DEV_GONE, &child->state); - if (child->dev_type == EDGE_DEV || - child->dev_type == FANOUT_DEV) + if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || + child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) sas_unregister_ex_tree(parent->port, child); else sas_unregister_dev(parent->port, child); @@ -1916,8 +1916,8 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root, int res = 0; list_for_each_entry(child, &ex_root->children, siblings) { - if (child->dev_type == EDGE_DEV || - child->dev_type == FANOUT_DEV) { + if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || + child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { struct sas_expander_device *ex = rphy_to_expander_device(child->rphy); @@ -1970,8 +1970,8 @@ static int sas_discover_new(struct domain_device *dev, int phy_id) list_for_each_entry(child, &dev->ex_dev.children, siblings) { if (SAS_ADDR(child->sas_addr) == SAS_ADDR(ex_phy->attached_sas_addr)) { - if (child->dev_type == EDGE_DEV || - child->dev_type == FANOUT_DEV) + if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE || + child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) res = sas_discover_bfs_by_root(child); break; } @@ -1979,16 +1979,16 @@ static int sas_discover_new(struct domain_device *dev, int phy_id) return res; } -static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old) +static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old) { if (old == new) return true; /* treat device directed resets as flutter, if we went - * SAS_END_DEV to SATA_PENDING the link needs recovery + * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery */ - if ((old == SATA_PENDING && new == SAS_END_DEV) || - (old == SAS_END_DEV && new == SATA_PENDING)) + if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) || + (old == SAS_END_DEVICE && new == SAS_SATA_PENDING)) return true; return false; @@ -1998,7 +1998,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; - enum sas_dev_type type = NO_DEVICE; + enum sas_device_type type = SAS_PHY_UNUSED; u8 sas_addr[8]; int res; @@ -2032,7 +2032,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last) sas_ex_phy_discover(dev, phy_id); - if (ata_dev && phy->attached_dev_type == SATA_PENDING) + if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING) action = ", needs recovery"; SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n", SAS_ADDR(dev->sas_addr), phy_id, action); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 1de67964e5a1..7e7ba83f0a21 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -131,16 +131,16 @@ static inline void sas_fill_in_rphy(struct domain_device *dev, rphy->identify.initiator_port_protocols = dev->iproto; rphy->identify.target_port_protocols = dev->tproto; switch (dev->dev_type) { - case SATA_DEV: + case SAS_SATA_DEV: /* FIXME: need sata device type */ - case SAS_END_DEV: - case SATA_PENDING: + case SAS_END_DEVICE: + case SAS_SATA_PENDING: rphy->identify.device_type = SAS_END_DEVICE; break; - case EDGE_DEV: + case SAS_EDGE_EXPANDER_DEVICE: rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE; break; - case FANOUT_DEV: + case SAS_FANOUT_EXPANDER_DEVICE: rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE; break; default: diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 1398b714c018..d3c5297c6c89 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -69,7 +69,7 @@ static void sas_resume_port(struct asd_sas_phy *phy) continue; } - if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) { + if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { dev->ex_dev.ex_change_count = -1; for (i = 0; i < dev->ex_dev.num_phys; i++) { struct ex_phy *phy = &dev->ex_dev.ex_phy[i]; diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 74550922ad55..7b7381d7671f 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -254,7 +254,7 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost) } for (i = 0; i < MVS_MAX_DEVICES; i++) { mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED; - mvi->devices[i].dev_type = NO_DEVICE; + mvi->devices[i].dev_type = SAS_PHY_UNUSED; mvi->devices[i].device_id = i; mvi->devices[i].dev_status = MVS_DEV_NORMAL; init_timer(&mvi->devices[i].timer); diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index 532110f4562a..c9e244984e30 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -706,7 +706,7 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi, return 0; } -#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE))) +#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == SAS_PHY_UNUSED))) static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf, struct mvs_tmf_task *tmf, int *pass) { @@ -726,7 +726,7 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf * libsas will use dev->port, should * not call task_done for sata */ - if (dev->dev_type != SATA_DEV) + if (dev->dev_type != SAS_SATA_DEV) task->task_done(task); return rc; } @@ -1159,10 +1159,10 @@ void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st) phy->identify.device_type = phy->att_dev_info & PORT_DEV_TYPE_MASK; - if (phy->identify.device_type == SAS_END_DEV) + if (phy->identify.device_type == SAS_END_DEVICE) phy->identify.target_port_protocols = SAS_PROTOCOL_SSP; - else if (phy->identify.device_type != NO_DEVICE) + else if (phy->identify.device_type != SAS_PHY_UNUSED) phy->identify.target_port_protocols = SAS_PROTOCOL_SMP; if (oob_done) @@ -1260,7 +1260,7 @@ struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi) { u32 dev; for (dev = 0; dev < MVS_MAX_DEVICES; dev++) { - if (mvi->devices[dev].dev_type == NO_DEVICE) { + if (mvi->devices[dev].dev_type == SAS_PHY_UNUSED) { mvi->devices[dev].device_id = dev; return &mvi->devices[dev]; } @@ -1278,7 +1278,7 @@ void mvs_free_dev(struct mvs_device *mvi_dev) u32 id = mvi_dev->device_id; memset(mvi_dev, 0, sizeof(*mvi_dev)); mvi_dev->device_id = id; - mvi_dev->dev_type = NO_DEVICE; + mvi_dev->dev_type = SAS_PHY_UNUSED; mvi_dev->dev_status = MVS_DEV_NORMAL; mvi_dev->taskfileset = MVS_ID_NOT_MAPPED; } @@ -1480,7 +1480,7 @@ static int mvs_debug_I_T_nexus_reset(struct domain_device *dev) { int rc; struct sas_phy *phy = sas_get_local_phy(dev); - int reset_type = (dev->dev_type == SATA_DEV || + int reset_type = (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1; rc = sas_phy_reset(phy, reset_type); sas_put_local_phy(phy); @@ -1629,7 +1629,7 @@ int mvs_abort_task(struct sas_task *task) } else if (task->task_proto & SAS_PROTOCOL_SATA || task->task_proto & SAS_PROTOCOL_STP) { - if (SATA_DEV == dev->dev_type) { + if (SAS_SATA_DEV == dev->dev_type) { struct mvs_slot_info *slot = task->lldd_task; u32 slot_idx = (u32)(slot - mvi->slot_info); mv_dprintk("mvs_abort_task() mvi=%p task=%p " diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index 9f3cc13a5ce7..60e2fb7f2dca 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -67,7 +67,7 @@ extern const struct mvs_dispatch mvs_94xx_dispatch; extern struct kmem_cache *mvs_task_list_cache; #define DEV_IS_EXPANDER(type) \ - ((type == EDGE_DEV) || (type == FANOUT_DEV)) + ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE)) #define bit(n) ((u64)1 << n) @@ -241,7 +241,7 @@ struct mvs_phy { struct mvs_device { struct list_head dev_entry; - enum sas_dev_type dev_type; + enum sas_device_type dev_type; struct mvs_info *mvi_info; struct domain_device *sas_device; struct timer_list timer; diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 95d04cc78c0b..69dd49c05f1e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1505,7 +1505,7 @@ void pm8001_work_fn(struct work_struct *work) pm8001_dev = pw->data; /* Most stash device structure */ if ((pm8001_dev == NULL) || ((pw->handler != IO_XFER_ERROR_BREAK) - && (pm8001_dev->dev_type == NO_DEVICE))) { + && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) { kfree(pw); return; } @@ -3443,7 +3443,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) sizeof(struct dev_to_host_fis)); phy->frame_rcvd_size = sizeof(struct dev_to_host_fis); phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; - phy->identify.device_type = SATA_DEV; + phy->identify.device_type = SAS_SATA_DEV; pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); pm8001_bytes_dmaed(pm8001_ha, phy_id); @@ -4465,7 +4465,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | phy_id); - payload.sas_identify.dev_type = SAS_END_DEV; + payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, pm8001_ha->sas_addr, SAS_ADDR_SIZE); @@ -4527,11 +4527,11 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, if (flag == 1) stp_sspsmp_sata = 0x02; /*direct attached sata */ else { - if (pm8001_dev->dev_type == SATA_DEV) + if (pm8001_dev->dev_type == SAS_SATA_DEV) stp_sspsmp_sata = 0x00; /* stp*/ - else if (pm8001_dev->dev_type == SAS_END_DEV || - pm8001_dev->dev_type == EDGE_DEV || - pm8001_dev->dev_type == FANOUT_DEV) + else if (pm8001_dev->dev_type == SAS_END_DEVICE || + pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || + pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) stp_sspsmp_sata = 0x01; /*ssp or smp*/ } if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) @@ -4662,9 +4662,9 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, PM8001_EH_DBG(pm8001_ha, pm8001_printk("cmd_tag = %x, abort task tag = 0x%x", cmd_tag, task_tag)); - if (pm8001_dev->dev_type == SAS_END_DEV) + if (pm8001_dev->dev_type == SAS_END_DEVICE) opc = OPC_INB_SSP_ABORT; - else if (pm8001_dev->dev_type == SATA_DEV) + else if (pm8001_dev->dev_type == SAS_SATA_DEV) opc = OPC_INB_SATA_ABORT; else opc = OPC_INB_SMP_ABORT;/* SMP */ diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 1c718520036a..e4b9bc7f5410 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -361,7 +361,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr; for (i = 0; i < PM8001_MAX_DEVICES; i++) { - pm8001_ha->devices[i].dev_type = NO_DEVICE; + pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED; pm8001_ha->devices[i].id = i; pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES; pm8001_ha->devices[i].running_req = 0; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 9af95853f840..a85d73de7c80 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -357,7 +357,7 @@ static int sas_find_local_port_id(struct domain_device *dev) * @tmf: the task management IU */ #define DEV_IS_GONE(pm8001_dev) \ - ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))) + ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) static int pm8001_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf) { @@ -375,7 +375,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num, struct task_status_struct *tsm = &t->task_status; tsm->resp = SAS_TASK_UNDELIVERED; tsm->stat = SAS_PHY_DOWN; - if (dev->dev_type != SATA_DEV) + if (dev->dev_type != SAS_SATA_DEV) t->task_done(t); return 0; } @@ -553,7 +553,7 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) { u32 dev; for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { - if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) { + if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { pm8001_ha->devices[dev].id = dev; return &pm8001_ha->devices[dev]; } @@ -589,7 +589,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev) u32 id = pm8001_dev->id; memset(pm8001_dev, 0, sizeof(*pm8001_dev)); pm8001_dev->id = id; - pm8001_dev->dev_type = NO_DEVICE; + pm8001_dev->dev_type = SAS_PHY_UNUSED; pm8001_dev->device_id = PM8001_MAX_DEVICES; pm8001_dev->sas_device = NULL; } @@ -647,7 +647,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) res = -1; } } else { - if (dev->dev_type == SATA_DEV) { + if (dev->dev_type == SAS_SATA_DEV) { pm8001_device->attached_phy = dev->rphy->identify.phy_identifier; flag = 1; /* directly sata*/ @@ -657,7 +657,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); spin_unlock_irqrestore(&pm8001_ha->lock, flags); wait_for_completion(&completion); - if (dev->dev_type == SAS_END_DEV) + if (dev->dev_type == SAS_END_DEVICE) msleep(50); pm8001_ha->flags = PM8001F_RUN_TIME; return 0; @@ -927,7 +927,7 @@ void pm8001_open_reject_retry( struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; pm8001_dev = ccb->device; - if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)) + if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) continue; if (!device_to_close) { uintptr_t d = (uintptr_t)pm8001_dev diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 72d46ea398dc..570819464d90 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -103,7 +103,7 @@ do { \ #define PM8001_READ_VPD -#define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV)) +#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE)) #define PM8001_NAME_LENGTH 32/* generic length of strings */ extern struct list_head hba_list; @@ -206,7 +206,7 @@ struct pm8001_phy { }; struct pm8001_device { - enum sas_dev_type dev_type; + enum sas_device_type dev_type; struct domain_device *sas_device; u32 attached_phy; u32 id; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 670998a8ca79..302514d8157b 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -2684,7 +2684,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) sizeof(struct dev_to_host_fis)); phy->frame_rcvd_size = sizeof(struct dev_to_host_fis); phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; - phy->identify.device_type = SATA_DEV; + phy->identify.device_type = SAS_SATA_DEV; pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); pm8001_bytes_dmaed(pm8001_ha, phy_id); @@ -3952,7 +3952,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need **/ - payload.sas_identify.dev_type = SAS_END_DEV; + payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, pm8001_ha->sas_addr, SAS_ADDR_SIZE); @@ -4015,11 +4015,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, if (flag == 1) { stp_sspsmp_sata = 0x02; /*direct attached sata */ } else { - if (pm8001_dev->dev_type == SATA_DEV) + if (pm8001_dev->dev_type == SAS_SATA_DEV) stp_sspsmp_sata = 0x00; /* stp*/ - else if (pm8001_dev->dev_type == SAS_END_DEV || - pm8001_dev->dev_type == EDGE_DEV || - pm8001_dev->dev_type == FANOUT_DEV) + else if (pm8001_dev->dev_type == SAS_END_DEVICE || + pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || + pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) stp_sspsmp_sata = 0x01; /*ssp or smp*/ } if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index ef937b56f9b5..e2c1e66d58ae 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -118,7 +118,7 @@ struct ex_phy { enum ex_phy_state phy_state; - enum sas_dev_type attached_dev_type; + enum sas_device_type attached_dev_type; enum sas_linkrate linkrate; u8 attached_sata_host:1; @@ -195,7 +195,7 @@ enum { struct domain_device { spinlock_t done_lock; - enum sas_dev_type dev_type; + enum sas_device_type dev_type; enum sas_linkrate linkrate; enum sas_linkrate min_linkrate; diff --git a/include/scsi/sas.h b/include/scsi/sas.h index be3eb0bf1ac0..0d2607d12387 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -90,16 +90,18 @@ enum sas_oob_mode { }; /* See sas_discover.c if you plan on changing these */ -enum sas_dev_type { - NO_DEVICE = 0, /* protocol */ - SAS_END_DEV = 1, /* protocol */ - EDGE_DEV = 2, /* protocol */ - FANOUT_DEV = 3, /* protocol */ - SAS_HA = 4, - SATA_DEV = 5, - SATA_PM = 7, - SATA_PM_PORT= 8, - SATA_PENDING = 9, +enum sas_device_type { + /* these are SAS protocol defined (attached device type field) */ + SAS_PHY_UNUSED = 0, + SAS_END_DEVICE = 1, + SAS_EDGE_EXPANDER_DEVICE = 2, + SAS_FANOUT_EXPANDER_DEVICE = 3, + /* these are internal to libsas */ + SAS_HA = 4, + SAS_SATA_DEV = 5, + SAS_SATA_PM = 7, + SAS_SATA_PM_PORT = 8, + SAS_SATA_PENDING = 9, }; enum sas_protocol { diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index ff71a5654684..00f41aeeecf5 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -32,8 +32,8 @@ static inline int dev_is_sata(struct domain_device *dev) { - return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || - dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING; + return dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM || + dev->dev_type == SAS_SATA_PM_PORT || dev->dev_type == SAS_SATA_PENDING; } int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 9b8e08879cfc..0bd71e2702e3 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -10,13 +10,6 @@ struct scsi_transport_template; struct sas_rphy; struct request; -enum sas_device_type { - SAS_PHY_UNUSED = 0, - SAS_END_DEVICE = 1, - SAS_EDGE_EXPANDER_DEVICE = 2, - SAS_FANOUT_EXPANDER_DEVICE = 3, -}; - static inline int sas_protocol_ata(enum sas_protocol proto) { return ((proto & SAS_PROTOCOL_SATA) ||