From: Niklas Cassel Date: Thu, 26 May 2022 13:57:21 +0000 (+0200) Subject: nvme: set controller enable bit in a separate write X-Git-Tag: v6.6.17~7350^2~1^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=aa41d2fe60ee2e4452b0f9ca9f0f6d80a4ff9f9d;p=platform%2Fkernel%2Flinux-rpi.git nvme: set controller enable bit in a separate write The NVM Express Base Specification 2.0 specifies in the description of the CC – Controller Configuration register: "Host software shall set the Arbitration Mechanism Selected (CC.AMS), the Memory Page Size (CC.MPS), and the I/O Command Set Selected (CC.CSS) to valid values prior to enabling the controller by setting CC.EN to ‘1’. While we haven't seen any controller misbehaving while setting all bits in a single write, let's do it in the order that it is written in the spec, as there could potentially be controllers that are implemented to rely on the configuration bits being set before enabling the controller. Signed-off-by: Niklas Cassel Signed-off-by: Christoph Hellwig --- diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index a7660e4..98e343c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2227,8 +2227,16 @@ int nvme_enable_ctrl(struct nvme_ctrl *ctrl) ctrl->ctrl_config |= (NVME_CTRL_PAGE_SHIFT - 12) << NVME_CC_MPS_SHIFT; ctrl->ctrl_config |= NVME_CC_AMS_RR | NVME_CC_SHN_NONE; ctrl->ctrl_config |= NVME_CC_IOSQES | NVME_CC_IOCQES; - ctrl->ctrl_config |= NVME_CC_ENABLE; + ret = ctrl->ops->reg_write32(ctrl, NVME_REG_CC, ctrl->ctrl_config); + if (ret) + return ret; + /* Flush write to device (required if transport is PCI) */ + ret = ctrl->ops->reg_read32(ctrl, NVME_REG_CC, &ctrl->ctrl_config); + if (ret) + return ret; + + ctrl->ctrl_config |= NVME_CC_ENABLE; ret = ctrl->ops->reg_write32(ctrl, NVME_REG_CC, ctrl->ctrl_config); if (ret) return ret;