From: Yegor Yefremov Date: Thu, 1 Dec 2016 11:52:16 +0000 (+0100) Subject: arm: baltos: remove TI board leftover X-Git-Tag: v2017.01-rc1~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a970727067f10a0bbe5836695dc91c7cbccc6e5b;p=platform%2Fkernel%2Fu-boot.git arm: baltos: remove TI board leftover Remove unneeded pinmux configurations and TI EEPROM struct. Signed-off-by: Yegor Yefremov Reviewed-by: Tom Rini --- diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c index 27056e1..dbf79a5 100644 --- a/board/vscom/baltos/board.c +++ b/board/vscom/baltos/board.c @@ -415,7 +415,6 @@ int board_eth_init(bd_t *bis) int rv, n = 0; uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - __maybe_unused struct am335x_baseboard_id header; /* * Note here that we're using CPSW1 since that has a 1Gbit PHY while diff --git a/board/vscom/baltos/board.h b/board/vscom/baltos/board.h index bcdb648..40ddd90 100644 --- a/board/vscom/baltos/board.h +++ b/board/vscom/baltos/board.h @@ -11,24 +11,6 @@ #ifndef _BOARD_H_ #define _BOARD_H_ -/* - * TI AM335x parts define a system EEPROM that defines certain sub-fields. - * We use these fields to in turn see what board we are on, and what - * that might require us to set or not set. - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[HDR_NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; - typedef struct _BSP_VS_HWPARAM // v1.0 { uint32_t Magic; @@ -41,37 +23,6 @@ typedef struct _BSP_VS_HWPARAM // v1.0 uint8_t MAC3[6]; // WL1271 WLAN } __attribute__ ((packed)) BSP_VS_HWPARAM; -static inline int board_is_bone(struct am335x_baseboard_id *header) -{ - return !strncmp(header->name, "A335BONE", HDR_NAME_LEN); -} - -static inline int board_is_bone_lt(struct am335x_baseboard_id *header) -{ - return !strncmp(header->name, "A335BNLT", HDR_NAME_LEN); -} - -static inline int board_is_evm_sk(struct am335x_baseboard_id *header) -{ - return !strncmp("A335X_SK", header->name, HDR_NAME_LEN); -} - -static inline int board_is_idk(struct am335x_baseboard_id *header) -{ - return !strncmp(header->config, "SKU#02", 6); -} - -static inline int board_is_gp_evm(struct am335x_baseboard_id *header) -{ - return !strncmp("A33515BB", header->name, HDR_NAME_LEN); -} - -static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header) -{ - return (board_is_gp_evm(header) && - strncmp("1.5", header->version, 3) <= 0); -} - /* * We have three pin mux functions that must exist. We must be able to enable * uart0, for initial output and i2c0 to read the main EEPROM. We then have a @@ -79,12 +30,6 @@ static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header) * is required on the board. */ void enable_uart0_pin_mux(void); -void enable_uart1_pin_mux(void); -void enable_uart2_pin_mux(void); -void enable_uart3_pin_mux(void); -void enable_uart4_pin_mux(void); -void enable_uart5_pin_mux(void); -void enable_i2c0_pin_mux(void); void enable_i2c1_pin_mux(void); void enable_board_pin_mux(void); #endif diff --git a/board/vscom/baltos/mux.c b/board/vscom/baltos/mux.c index 8783b25..94410ae 100644 --- a/board/vscom/baltos/mux.c +++ b/board/vscom/baltos/mux.c @@ -27,36 +27,6 @@ static struct module_pin_mux uart0_pin_mux[] = { {-1}, }; -static struct module_pin_mux uart1_pin_mux[] = { - {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ - {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ - {-1}, -}; - -static struct module_pin_mux uart2_pin_mux[] = { - {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ - {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ - {-1}, -}; - -static struct module_pin_mux uart3_pin_mux[] = { - {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ - {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ - {-1}, -}; - -static struct module_pin_mux uart4_pin_mux[] = { - {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ - {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ - {-1}, -}; - -static struct module_pin_mux uart5_pin_mux[] = { - {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ - {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ - {-1}, -}; - static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -68,14 +38,6 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - static struct module_pin_mux i2c1_pin_mux[] = { {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ @@ -144,36 +106,6 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -void enable_uart1_pin_mux(void) -{ - configure_module_pin_mux(uart1_pin_mux); -} - -void enable_uart2_pin_mux(void) -{ - configure_module_pin_mux(uart2_pin_mux); -} - -void enable_uart3_pin_mux(void) -{ - configure_module_pin_mux(uart3_pin_mux); -} - -void enable_uart4_pin_mux(void) -{ - configure_module_pin_mux(uart4_pin_mux); -} - -void enable_uart5_pin_mux(void) -{ - configure_module_pin_mux(uart5_pin_mux); -} - -void enable_i2c0_pin_mux(void) -{ - configure_module_pin_mux(i2c0_pin_mux); -} - void enable_i2c1_pin_mux(void) { configure_module_pin_mux(i2c1_pin_mux); @@ -181,7 +113,6 @@ void enable_i2c1_pin_mux(void) void enable_board_pin_mux() { - /* Baltos */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii2_pin_mux);