From: Lucas Stach <dev@lynxeye.de>
Date: Tue, 25 Sep 2012 22:14:37 +0000 (+0200)
Subject: tegra20: port to new ehci interface
X-Git-Tag: v2013.01-rc1~269
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a896211ff11d6eba553df710168fcab2a1b2d9ec;p=kernel%2Fu-boot.git

tegra20: port to new ehci interface

EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---

diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
index cac0918..eda8e6f 100644
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -77,7 +77,6 @@ struct fdt_usb {
 
 static struct fdt_usb port[USB_PORTS_MAX];	/* List of valid USB ports */
 static unsigned port_count;			/* Number of available ports */
-static int port_current;			/* Current port (-1 = none) */
 
 /*
  * This table has USB timing parameters for each Oscillator frequency we
@@ -351,30 +350,25 @@ static int add_port(struct fdt_usb *config, const u32 timing[])
 	return 0;
 }
 
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
+int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
 {
 	struct usb_ctlr *usbctlr;
 
 	if (portnum >= port_count)
 		return -1;
-	tegrausb_stop_port();
 	set_host_mode(&port[portnum]);
 
 	usbctlr = port[portnum].reg;
 	*hccr = (u32)&usbctlr->cap_length;
 	*hcor = (u32)&usbctlr->usb_cmd;
-	port_current = portnum;
 	return 0;
 }
 
-int tegrausb_stop_port(void)
+int tegrausb_stop_port(int portnum)
 {
 	struct usb_ctlr *usbctlr;
 
-	if (port_current == -1)
-		return -1;
-
-	usbctlr = port[port_current].reg;
+	usbctlr = port[portnum].reg;
 
 	/* Stop controller */
 	writel(0, &usbctlr->usb_cmd);
@@ -383,7 +377,7 @@ int tegrausb_stop_port(void)
 	/* Initiate controller reset */
 	writel(2, &usbctlr->usb_cmd);
 	udelay(1000);
-	port_current = -1;
+
 	return 0;
 }
 
@@ -459,7 +453,6 @@ int board_usb_init(const void *blob)
 			return -1;
 		set_host_mode(&config);
 	}
-	port_current = -1;
 
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
index 638033b..4bbd4aa 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -240,13 +240,13 @@ int board_usb_init(const void *blob);
  * @param hcor		returns start address of EHCI HCOR registers
  * @return 0 if ok, -1 on error (generally invalid port number)
  */
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
+int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
 
 /**
  * Stop the current port
  *
  * @return 0 if ok, -1 if no port was active
  */
-int tegrausb_stop_port(void);
+int tegrausb_stop_port(int portnum);
 
 #endif	/* _TEGRA_USB_H_ */
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index bb5a68e..a1c43f8 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -57,7 +57,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 	 * Select the first port, as we don't have a way of selecting others
 	 * yet
 	 */
-	if (tegrausb_start_port(0, &our_hccr, &our_hcor))
+	if (tegrausb_start_port(index, &our_hccr, &our_hcor))
 		return -1;
 
 	*hccr = (struct ehci_hccr *)our_hccr;
@@ -72,6 +72,5 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
  */
 int ehci_hcd_stop(int index)
 {
-	tegrausb_stop_port();
-	return 0;
+	return tegrausb_stop_port(index);
 }