From: Feng Tang Date: Wed, 4 Jan 2023 08:19:38 +0000 (+0800) Subject: x86/tsc: Add option to force frequency recalibration with HW timer X-Git-Tag: v6.6.17~5530^2^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a7ec817d55421ac214cac9d3e5ebb65d848198dc;p=platform%2Fkernel%2Flinux-rpi.git x86/tsc: Add option to force frequency recalibration with HW timer The kernel assumes that the TSC frequency which is provided by the hardware / firmware via MSRs or CPUID(0x15) is correct after applying a few basic consistency checks. This disables the TSC recalibration against HPET or PM timer. As a result there is no mechanism to validate that frequency in cases where a firmware or hardware defect is suspected. And there was case that some user used atomic clock to measure the TSC frequency and reported an inaccuracy issue, which was later fixed in firmware. Add an option 'recalibrate' for 'tsc' kernel parameter to force the tsc freq recalibration with HPET or PM timer, and warn if the deviation from previous value is more than about 500 PPM, which provides a way to verify the data from hardware / firmware. There is no functional change to existing work flow. Recently there was a real-world case: "The 40ms/s divergence between TSC and HPET was observed on hardware that is quite recent" [1], on that platform the TSC frequence 1896 MHz was got from CPUID(0x15), and the force-reclibration with HPET/PMTIMER both calibrated out value of 1975 MHz, which also matched with check from software 'chronyd', indicating it's a problem of BIOS or firmware. [Thanks tglx for helping improving the commit log] [ paulmck: Wordsmith Kconfig help text. ] [1]. https://lore.kernel.org/lkml/20221117230910.GI4001@paulmck-ThinkPad-P17-Gen-1/ Signed-off-by: Feng Tang Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: "H. Peter Anvin" Cc: Jonathan Corbet Cc: Cc: Signed-off-by: Paul E. McKenney --- diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 6cfa6e3..95f0d10 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -6369,6 +6369,10 @@ in situations with strict latency requirements (where interruptions from clocksource watchdog are not acceptable). + [x86] recalibrate: force recalibration against a HW timer + (HPET or PM timer) on systems whose TSC frequency was + obtained from HW or FW using either an MSR or CPUID(0x15). + Warn if the difference is more than 500 ppm. tsc_early_khz= [X86] Skip early TSC calibration and use the given value instead. Useful when the early TSC frequency discovery diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a78e73d..92bbc4a 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -48,6 +48,8 @@ static DEFINE_STATIC_KEY_FALSE(__use_tsc); int tsc_clocksource_reliable; +static int __read_mostly tsc_force_recalibrate; + static u32 art_to_tsc_numerator; static u32 art_to_tsc_denominator; static u64 art_to_tsc_offset; @@ -303,6 +305,8 @@ static int __init tsc_setup(char *str) mark_tsc_unstable("boot parameter"); if (!strcmp(str, "nowatchdog")) no_tsc_watchdog = 1; + if (!strcmp(str, "recalibrate")) + tsc_force_recalibrate = 1; return 1; } @@ -1374,6 +1378,25 @@ restart: else freq = calc_pmtimer_ref(delta, ref_start, ref_stop); + /* Will hit this only if tsc_force_recalibrate has been set */ + if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) { + + /* Warn if the deviation exceeds 500 ppm */ + if (abs(tsc_khz - freq) > (tsc_khz >> 11)) { + pr_warn("Warning: TSC freq calibrated by CPUID/MSR differs from what is calibrated by HW timer, please check with vendor!!\n"); + pr_info("Previous calibrated TSC freq:\t %lu.%03lu MHz\n", + (unsigned long)tsc_khz / 1000, + (unsigned long)tsc_khz % 1000); + } + + pr_info("TSC freq recalibrated by [%s]:\t %lu.%03lu MHz\n", + hpet ? "HPET" : "PM_TIMER", + (unsigned long)freq / 1000, + (unsigned long)freq % 1000); + + return; + } + /* Make sure we're within 1% */ if (abs(tsc_khz - freq) > tsc_khz/100) goto out; @@ -1407,8 +1430,10 @@ static int __init init_tsc_clocksource(void) if (!boot_cpu_has(X86_FEATURE_TSC) || !tsc_khz) return 0; - if (tsc_unstable) - goto unreg; + if (tsc_unstable) { + clocksource_unregister(&clocksource_tsc_early); + return 0; + } if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3)) clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; @@ -1421,9 +1446,10 @@ static int __init init_tsc_clocksource(void) if (boot_cpu_has(X86_FEATURE_ART)) art_related_clocksource = &clocksource_tsc; clocksource_register_khz(&clocksource_tsc, tsc_khz); -unreg: clocksource_unregister(&clocksource_tsc_early); - return 0; + + if (!tsc_force_recalibrate) + return 0; } schedule_delayed_work(&tsc_irqwork, 0);