From: Arnd Bergmann Date: Fri, 21 Oct 2022 20:27:47 +0000 (+0200) Subject: dmaengine: remove s3c24xx driver X-Git-Tag: v6.6.7~3533^2~39 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a7ddf74b784b57ec7c93b780ec8236dc6aa4db02;p=platform%2Fkernel%2Flinux-starfive.git dmaengine: remove s3c24xx driver The s3c24xx platform was removed and this driver is no longer needed. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann --- diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index b6d48d5..2f2a2dd 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -610,18 +610,6 @@ config SPRD_DMA help Enable support for the on-chip DMA controller on Spreadtrum platform. -config S3C24XX_DMAC - bool "Samsung S3C24XX DMA support" - depends on ARCH_S3C24XX || COMPILE_TEST - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - help - Support for the Samsung S3C24XX DMA controller driver. The - DMA controller is having multiple DMA channels which can be - configured for different peripherals like audio, UART, SPI. - The DMA controller can transfer data from memory to peripheral, - periphal to memory, periphal to periphal and memory to memory. - config TXX9_DMAC tristate "Toshiba TXx9 SoC DMA support" depends on MACH_TX49XX diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 5b55ada..a4fd1ce 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -70,7 +70,6 @@ obj-$(CONFIG_STM32_DMA) += stm32-dma.o obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o obj-$(CONFIG_SPRD_DMA) += sprd-dma.o -obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o obj-$(CONFIG_TEGRA186_GPC_DMA) += tegra186-gpc-dma.o obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c deleted file mode 100644 index a09eeb5..0000000 --- a/drivers/dma/s3c24xx-dma.c +++ /dev/null @@ -1,1428 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * S3C24XX DMA handling - * - * Copyright (c) 2013 Heiko Stuebner - * - * based on amba-pl08x.c - * - * Copyright (c) 2006 ARM Ltd. - * Copyright (c) 2010 ST-Ericsson SA - * - * Author: Peter Pearse - * Author: Linus Walleij - * - * The DMA controllers in S3C24XX SoCs have a varying number of DMA signals - * that can be routed to any of the 4 to 8 hardware-channels. - * - * Therefore on these DMA controllers the number of channels - * and the number of incoming DMA signals are two totally different things. - * It is usually not possible to theoretically handle all physical signals, - * so a multiplexing scheme with possible denial of use is necessary. - * - * Open items: - * - bursts - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "dmaengine.h" -#include "virt-dma.h" - -#define MAX_DMA_CHANNELS 8 - -#define S3C24XX_DISRC 0x00 -#define S3C24XX_DISRCC 0x04 -#define S3C24XX_DISRCC_INC_INCREMENT 0 -#define S3C24XX_DISRCC_INC_FIXED BIT(0) -#define S3C24XX_DISRCC_LOC_AHB 0 -#define S3C24XX_DISRCC_LOC_APB BIT(1) - -#define S3C24XX_DIDST 0x08 -#define S3C24XX_DIDSTC 0x0c -#define S3C24XX_DIDSTC_INC_INCREMENT 0 -#define S3C24XX_DIDSTC_INC_FIXED BIT(0) -#define S3C24XX_DIDSTC_LOC_AHB 0 -#define S3C24XX_DIDSTC_LOC_APB BIT(1) -#define S3C24XX_DIDSTC_INT_TC0 0 -#define S3C24XX_DIDSTC_INT_RELOAD BIT(2) - -#define S3C24XX_DCON 0x10 - -#define S3C24XX_DCON_TC_MASK 0xfffff -#define S3C24XX_DCON_DSZ_BYTE (0 << 20) -#define S3C24XX_DCON_DSZ_HALFWORD (1 << 20) -#define S3C24XX_DCON_DSZ_WORD (2 << 20) -#define S3C24XX_DCON_DSZ_MASK (3 << 20) -#define S3C24XX_DCON_DSZ_SHIFT 20 -#define S3C24XX_DCON_AUTORELOAD 0 -#define S3C24XX_DCON_NORELOAD BIT(22) -#define S3C24XX_DCON_HWTRIG BIT(23) -#define S3C24XX_DCON_HWSRC_SHIFT 24 -#define S3C24XX_DCON_SERV_SINGLE 0 -#define S3C24XX_DCON_SERV_WHOLE BIT(27) -#define S3C24XX_DCON_TSZ_UNIT 0 -#define S3C24XX_DCON_TSZ_BURST4 BIT(28) -#define S3C24XX_DCON_INT BIT(29) -#define S3C24XX_DCON_SYNC_PCLK 0 -#define S3C24XX_DCON_SYNC_HCLK BIT(30) -#define S3C24XX_DCON_DEMAND 0 -#define S3C24XX_DCON_HANDSHAKE BIT(31) - -#define S3C24XX_DSTAT 0x14 -#define S3C24XX_DSTAT_STAT_BUSY BIT(20) -#define S3C24XX_DSTAT_CURRTC_MASK 0xfffff - -#define S3C24XX_DMASKTRIG 0x20 -#define S3C24XX_DMASKTRIG_SWTRIG BIT(0) -#define S3C24XX_DMASKTRIG_ON BIT(1) -#define S3C24XX_DMASKTRIG_STOP BIT(2) - -#define S3C24XX_DMAREQSEL 0x24 -#define S3C24XX_DMAREQSEL_HW BIT(0) - -/* - * S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel - * for a DMA source. Instead only specific channels are valid. - * All of these SoCs have 4 physical channels and the number of request - * source bits is 3. Additionally we also need 1 bit to mark the channel - * as valid. - * Therefore we separate the chansel element of the channel data into 4 - * parts of 4 bits each, to hold the information if the channel is valid - * and the hw request source to use. - * - * Example: - * SDI is valid on channels 0, 2 and 3 - with varying hw request sources. - * For it the chansel field would look like - * - * ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1 - * ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2 - * ((BIT(3) | 2) << 0 * 4) // channel 0, with request source 2 - */ -#define S3C24XX_CHANSEL_WIDTH 4 -#define S3C24XX_CHANSEL_VALID BIT(3) -#define S3C24XX_CHANSEL_REQ_MASK 7 - -/* - * struct soc_data - vendor-specific config parameters for individual SoCs - * @stride: spacing between the registers of each channel - * @has_reqsel: does the controller use the newer requestselection mechanism - * @has_clocks: are controllable dma-clocks present - */ -struct soc_data { - int stride; - bool has_reqsel; - bool has_clocks; -}; - -/* - * enum s3c24xx_dma_chan_state - holds the virtual channel states - * @S3C24XX_DMA_CHAN_IDLE: the channel is idle - * @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport - * channel and is running a transfer on it - * @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport - * channel to become available (only pertains to memcpy channels) - */ -enum s3c24xx_dma_chan_state { - S3C24XX_DMA_CHAN_IDLE, - S3C24XX_DMA_CHAN_RUNNING, - S3C24XX_DMA_CHAN_WAITING, -}; - -/* - * struct s3c24xx_sg - structure containing data per sg - * @src_addr: src address of sg - * @dst_addr: dst address of sg - * @len: transfer len in bytes - * @node: node for txd's dsg_list - */ -struct s3c24xx_sg { - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; - struct list_head node; -}; - -/* - * struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor - * @vd: virtual DMA descriptor - * @dsg_list: list of children sg's - * @at: sg currently being transfered - * @width: transfer width - * @disrcc: value for source control register - * @didstc: value for destination control register - * @dcon: base value for dcon register - * @cyclic: indicate cyclic transfer - */ -struct s3c24xx_txd { - struct virt_dma_desc vd; - struct list_head dsg_list; - struct list_head *at; - u8 width; - u32 disrcc; - u32 didstc; - u32 dcon; - bool cyclic; -}; - -struct s3c24xx_dma_chan; - -/* - * struct s3c24xx_dma_phy - holder for the physical channels - * @id: physical index to this channel - * @valid: does the channel have all required elements - * @base: virtual memory base (remapped) for the this channel - * @irq: interrupt for this channel - * @clk: clock for this channel - * @lock: a lock to use when altering an instance of this struct - * @serving: virtual channel currently being served by this physicalchannel - * @host: a pointer to the host (internal use) - */ -struct s3c24xx_dma_phy { - unsigned int id; - bool valid; - void __iomem *base; - int irq; - struct clk *clk; - spinlock_t lock; - struct s3c24xx_dma_chan *serving; - struct s3c24xx_dma_engine *host; -}; - -/* - * struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel - * @id: the id of the channel - * @name: name of the channel - * @vc: wrapped virtual channel - * @phy: the physical channel utilized by this channel, if there is one - * @runtime_addr: address for RX/TX according to the runtime config - * @at: active transaction on this channel - * @lock: a lock for this channel data - * @host: a pointer to the host (internal use) - * @state: whether the channel is idle, running etc - * @slave: whether this channel is a device (slave) or for memcpy - */ -struct s3c24xx_dma_chan { - int id; - const char *name; - struct virt_dma_chan vc; - struct s3c24xx_dma_phy *phy; - struct dma_slave_config cfg; - struct s3c24xx_txd *at; - struct s3c24xx_dma_engine *host; - enum s3c24xx_dma_chan_state state; - bool slave; -}; - -/* - * struct s3c24xx_dma_engine - the local state holder for the S3C24XX - * @pdev: the corresponding platform device - * @pdata: platform data passed in from the platform/machine - * @base: virtual memory base (remapped) - * @slave: slave engine for this instance - * @memcpy: memcpy engine for this instance - * @phy_chans: array of data for the physical channels - */ -struct s3c24xx_dma_engine { - struct platform_device *pdev; - const struct s3c24xx_dma_platdata *pdata; - struct soc_data *sdata; - void __iomem *base; - struct dma_device slave; - struct dma_device memcpy; - struct s3c24xx_dma_phy *phy_chans; -}; - -/* - * Physical channel handling - */ - -/* - * Check whether a certain channel is busy or not. - */ -static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy) -{ - unsigned int val = readl(phy->base + S3C24XX_DSTAT); - return val & S3C24XX_DSTAT_STAT_BUSY; -} - -static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan, - struct s3c24xx_dma_phy *phy) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; - struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; - int phyvalid; - - /* every phy is valid for memcopy channels */ - if (!s3cchan->slave) - return true; - - /* On newer variants all phys can be used for all virtual channels */ - if (s3cdma->sdata->has_reqsel) - return true; - - phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH)); - return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false; -} - -/* - * Allocate a physical channel for a virtual channel - * - * Try to locate a physical channel to be used for this transfer. If all - * are taken return NULL and the requester will have to cope by using - * some fallback PIO mode or retrying later. - */ -static -struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - struct s3c24xx_dma_phy *phy = NULL; - unsigned long flags; - int i; - int ret; - - for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) { - phy = &s3cdma->phy_chans[i]; - - if (!phy->valid) - continue; - - if (!s3c24xx_dma_phy_valid(s3cchan, phy)) - continue; - - spin_lock_irqsave(&phy->lock, flags); - - if (!phy->serving) { - phy->serving = s3cchan; - spin_unlock_irqrestore(&phy->lock, flags); - break; - } - - spin_unlock_irqrestore(&phy->lock, flags); - } - - /* No physical channel available, cope with it */ - if (i == s3cdma->pdata->num_phy_channels) { - dev_warn(&s3cdma->pdev->dev, "no phy channel available\n"); - return NULL; - } - - /* start the phy clock */ - if (s3cdma->sdata->has_clocks) { - ret = clk_enable(phy->clk); - if (ret) { - dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n", - phy->id, ret); - phy->serving = NULL; - return NULL; - } - } - - return phy; -} - -/* - * Mark the physical channel as free. - * - * This drops the link between the physical and virtual channel. - */ -static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy) -{ - struct s3c24xx_dma_engine *s3cdma = phy->host; - - if (s3cdma->sdata->has_clocks) - clk_disable(phy->clk); - - phy->serving = NULL; -} - -/* - * Stops the channel by writing the stop bit. - * This should not be used for an on-going transfer, but as a method of - * shutting down a channel (eg, when it's no longer used) or terminating a - * transfer. - */ -static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy) -{ - writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG); -} - -/* - * Virtual channel handling - */ - -static inline -struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan) -{ - return container_of(chan, struct s3c24xx_dma_chan, vc.chan); -} - -static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_phy *phy = s3cchan->phy; - struct s3c24xx_txd *txd = s3cchan->at; - u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK; - - return tc * txd->width; -} - -static int s3c24xx_dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - unsigned long flags; - int ret = 0; - - /* Reject definitely invalid configurations */ - if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || - config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) - return -EINVAL; - - spin_lock_irqsave(&s3cchan->vc.lock, flags); - - if (!s3cchan->slave) { - ret = -EINVAL; - goto out; - } - - s3cchan->cfg = *config; - -out: - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); - return ret; -} - -/* - * Transfer handling - */ - -static inline -struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx) -{ - return container_of(tx, struct s3c24xx_txd, vd.tx); -} - -static struct s3c24xx_txd *s3c24xx_dma_get_txd(void) -{ - struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); - - if (txd) { - INIT_LIST_HEAD(&txd->dsg_list); - txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD; - } - - return txd; -} - -static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd) -{ - struct s3c24xx_sg *dsg, *_dsg; - - list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { - list_del(&dsg->node); - kfree(dsg); - } - - kfree(txd); -} - -static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan, - struct s3c24xx_txd *txd) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - struct s3c24xx_dma_phy *phy = s3cchan->phy; - const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; - struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node); - u32 dcon = txd->dcon; - u32 val; - - /* transfer-size and -count from len and width */ - switch (txd->width) { - case 1: - dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len; - break; - case 2: - dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2); - break; - case 4: - dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4); - break; - } - - if (s3cchan->slave) { - struct s3c24xx_dma_channel *cdata = - &pdata->channels[s3cchan->id]; - - if (s3cdma->sdata->has_reqsel) { - writel_relaxed((cdata->chansel << 1) | - S3C24XX_DMAREQSEL_HW, - phy->base + S3C24XX_DMAREQSEL); - } else { - int csel = cdata->chansel >> (phy->id * - S3C24XX_CHANSEL_WIDTH); - - csel &= S3C24XX_CHANSEL_REQ_MASK; - dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT; - dcon |= S3C24XX_DCON_HWTRIG; - } - } else { - if (s3cdma->sdata->has_reqsel) - writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL); - } - - writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC); - writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC); - writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST); - writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC); - writel_relaxed(dcon, phy->base + S3C24XX_DCON); - - val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG); - val &= ~S3C24XX_DMASKTRIG_STOP; - val |= S3C24XX_DMASKTRIG_ON; - - /* trigger the dma operation for memcpy transfers */ - if (!s3cchan->slave) - val |= S3C24XX_DMASKTRIG_SWTRIG; - - writel(val, phy->base + S3C24XX_DMASKTRIG); -} - -/* - * Set the initial DMA register values and start first sg. - */ -static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_phy *phy = s3cchan->phy; - struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc); - struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx); - - list_del(&txd->vd.node); - - s3cchan->at = txd; - - /* Wait for channel inactive */ - while (s3c24xx_dma_phy_busy(phy)) - cpu_relax(); - - /* point to the first element of the sg list */ - txd->at = txd->dsg_list.next; - s3c24xx_dma_start_next_sg(s3cchan, txd); -} - -/* - * Try to allocate a physical channel. When successful, assign it to - * this virtual channel, and initiate the next descriptor. The - * virtual channel lock must be held at this point. - */ -static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - struct s3c24xx_dma_phy *phy; - - phy = s3c24xx_dma_get_phy(s3cchan); - if (!phy) { - dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n", - s3cchan->name); - s3cchan->state = S3C24XX_DMA_CHAN_WAITING; - return; - } - - dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n", - phy->id, s3cchan->name); - - s3cchan->phy = phy; - s3cchan->state = S3C24XX_DMA_CHAN_RUNNING; - - s3c24xx_dma_start_next_txd(s3cchan); -} - -static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy, - struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - - dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n", - phy->id, s3cchan->name); - - /* - * We do this without taking the lock; we're really only concerned - * about whether this pointer is NULL or not, and we're guaranteed - * that this will only be called when it _already_ is non-NULL. - */ - phy->serving = s3cchan; - s3cchan->phy = phy; - s3cchan->state = S3C24XX_DMA_CHAN_RUNNING; - s3c24xx_dma_start_next_txd(s3cchan); -} - -/* - * Free a physical DMA channel, potentially reallocating it to another - * virtual channel if we have any pending. - */ -static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan) -{ - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - struct s3c24xx_dma_chan *p, *next; - -retry: - next = NULL; - - /* Find a waiting virtual channel for the next transfer. */ - list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node) - if (p->state == S3C24XX_DMA_CHAN_WAITING) { - next = p; - break; - } - - if (!next) { - list_for_each_entry(p, &s3cdma->slave.channels, - vc.chan.device_node) - if (p->state == S3C24XX_DMA_CHAN_WAITING && - s3c24xx_dma_phy_valid(p, s3cchan->phy)) { - next = p; - break; - } - } - - /* Ensure that the physical channel is stopped */ - s3c24xx_dma_terminate_phy(s3cchan->phy); - - if (next) { - bool success; - - /* - * Eww. We know this isn't going to deadlock - * but lockdep probably doesn't. - */ - spin_lock(&next->vc.lock); - /* Re-check the state now that we have the lock */ - success = next->state == S3C24XX_DMA_CHAN_WAITING; - if (success) - s3c24xx_dma_phy_reassign_start(s3cchan->phy, next); - spin_unlock(&next->vc.lock); - - /* If the state changed, try to find another channel */ - if (!success) - goto retry; - } else { - /* No more jobs, so free up the physical channel */ - s3c24xx_dma_put_phy(s3cchan->phy); - } - - s3cchan->phy = NULL; - s3cchan->state = S3C24XX_DMA_CHAN_IDLE; -} - -static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd) -{ - struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx); - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan); - - if (!s3cchan->slave) - dma_descriptor_unmap(&vd->tx); - - s3c24xx_dma_free_txd(txd); -} - -static irqreturn_t s3c24xx_dma_irq(int irq, void *data) -{ - struct s3c24xx_dma_phy *phy = data; - struct s3c24xx_dma_chan *s3cchan = phy->serving; - struct s3c24xx_txd *txd; - - dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id); - - /* - * Interrupts happen to notify the completion of a transfer and the - * channel should have moved into its stop state already on its own. - * Therefore interrupts on channels not bound to a virtual channel - * should never happen. Nevertheless send a terminate command to the - * channel if the unlikely case happens. - */ - if (unlikely(!s3cchan)) { - dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n", - phy->id); - - s3c24xx_dma_terminate_phy(phy); - - return IRQ_HANDLED; - } - - spin_lock(&s3cchan->vc.lock); - txd = s3cchan->at; - if (txd) { - /* when more sg's are in this txd, start the next one */ - if (!list_is_last(txd->at, &txd->dsg_list)) { - txd->at = txd->at->next; - if (txd->cyclic) - vchan_cyclic_callback(&txd->vd); - s3c24xx_dma_start_next_sg(s3cchan, txd); - } else if (!txd->cyclic) { - s3cchan->at = NULL; - vchan_cookie_complete(&txd->vd); - - /* - * And start the next descriptor (if any), - * otherwise free this channel. - */ - if (vchan_next_desc(&s3cchan->vc)) - s3c24xx_dma_start_next_txd(s3cchan); - else - s3c24xx_dma_phy_free(s3cchan); - } else { - vchan_cyclic_callback(&txd->vd); - - /* Cyclic: reset at beginning */ - txd->at = txd->dsg_list.next; - s3c24xx_dma_start_next_sg(s3cchan, txd); - } - } - spin_unlock(&s3cchan->vc.lock); - - return IRQ_HANDLED; -} - -/* - * The DMA ENGINE API - */ - -static int s3c24xx_dma_terminate_all(struct dma_chan *chan) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - LIST_HEAD(head); - unsigned long flags; - int ret; - - spin_lock_irqsave(&s3cchan->vc.lock, flags); - - if (!s3cchan->phy && !s3cchan->at) { - dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n", - s3cchan->id); - ret = -EINVAL; - goto unlock; - } - - s3cchan->state = S3C24XX_DMA_CHAN_IDLE; - - /* Mark physical channel as free */ - if (s3cchan->phy) - s3c24xx_dma_phy_free(s3cchan); - - /* Dequeue current job */ - if (s3cchan->at) { - vchan_terminate_vdesc(&s3cchan->at->vd); - s3cchan->at = NULL; - } - - /* Dequeue jobs not yet fired as well */ - - vchan_get_all_descriptors(&s3cchan->vc, &head); - - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); - - vchan_dma_desc_free_list(&s3cchan->vc, &head); - - return 0; - -unlock: - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); - - return ret; -} - -static void s3c24xx_dma_synchronize(struct dma_chan *chan) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - - vchan_synchronize(&s3cchan->vc); -} - -static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan) -{ - /* Ensure all queued descriptors are freed */ - vchan_free_chan_resources(to_virt_chan(chan)); -} - -static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan, - dma_cookie_t cookie, struct dma_tx_state *txstate) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - struct s3c24xx_txd *txd; - struct s3c24xx_sg *dsg; - struct virt_dma_desc *vd; - unsigned long flags; - enum dma_status ret; - size_t bytes = 0; - - spin_lock_irqsave(&s3cchan->vc.lock, flags); - ret = dma_cookie_status(chan, cookie, txstate); - - /* - * There's no point calculating the residue if there's - * no txstate to store the value. - */ - if (ret == DMA_COMPLETE || !txstate) { - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); - return ret; - } - - vd = vchan_find_desc(&s3cchan->vc, cookie); - if (vd) { - /* On the issued list, so hasn't been processed yet */ - txd = to_s3c24xx_txd(&vd->tx); - - list_for_each_entry(dsg, &txd->dsg_list, node) - bytes += dsg->len; - } else { - /* - * Currently running, so sum over the pending sg's and - * the currently active one. - */ - txd = s3cchan->at; - - dsg = list_entry(txd->at, struct s3c24xx_sg, node); - list_for_each_entry_from(dsg, &txd->dsg_list, node) - bytes += dsg->len; - - bytes += s3c24xx_dma_getbytes_chan(s3cchan); - } - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); - - /* - * This cookie not complete yet - * Get number of bytes left in the active transactions and queue - */ - dma_set_residue(txstate, bytes); - - /* Whether waiting or running, we're in progress */ - return ret; -} - -/* - * Initialize a descriptor to be used by memcpy submit - */ -static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( - struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, - size_t len, unsigned long flags) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - struct s3c24xx_txd *txd; - struct s3c24xx_sg *dsg; - int src_mod, dest_mod; - - dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %zu bytes from %s\n", - len, s3cchan->name); - - if ((len & S3C24XX_DCON_TC_MASK) != len) { - dev_err(&s3cdma->pdev->dev, "memcpy size %zu to large\n", len); - return NULL; - } - - txd = s3c24xx_dma_get_txd(); - if (!txd) - return NULL; - - dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); - if (!dsg) { - s3c24xx_dma_free_txd(txd); - return NULL; - } - list_add_tail(&dsg->node, &txd->dsg_list); - - dsg->src_addr = src; - dsg->dst_addr = dest; - dsg->len = len; - - /* - * Determine a suitable transfer width. - * The DMA controller cannot fetch/store information which is not - * naturally aligned on the bus, i.e., a 4 byte fetch must start at - * an address divisible by 4 - more generally addr % width must be 0. - */ - src_mod = src % 4; - dest_mod = dest % 4; - switch (len % 4) { - case 0: - txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1; - break; - case 2: - txd->width = ((src_mod == 2 || src_mod == 0) && - (dest_mod == 2 || dest_mod == 0)) ? 2 : 1; - break; - default: - txd->width = 1; - break; - } - - txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT; - txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT; - txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK | - S3C24XX_DCON_SERV_WHOLE; - - return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); -} - -static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic( - struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, - enum dma_transfer_direction direction, unsigned long flags) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; - struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; - struct s3c24xx_txd *txd; - struct s3c24xx_sg *dsg; - unsigned sg_len; - dma_addr_t slave_addr; - u32 hwcfg = 0; - int i; - - dev_dbg(&s3cdma->pdev->dev, - "prepare cyclic transaction of %zu bytes with period %zu from %s\n", - size, period, s3cchan->name); - - if (!is_slave_direction(direction)) { - dev_err(&s3cdma->pdev->dev, - "direction %d unsupported\n", direction); - return NULL; - } - - txd = s3c24xx_dma_get_txd(); - if (!txd) - return NULL; - - txd->cyclic = 1; - - if (cdata->handshake) - txd->dcon |= S3C24XX_DCON_HANDSHAKE; - - switch (cdata->bus) { - case S3C24XX_DMA_APB: - txd->dcon |= S3C24XX_DCON_SYNC_PCLK; - hwcfg |= S3C24XX_DISRCC_LOC_APB; - break; - case S3C24XX_DMA_AHB: - txd->dcon |= S3C24XX_DCON_SYNC_HCLK; - hwcfg |= S3C24XX_DISRCC_LOC_AHB; - break; - } - - /* - * Always assume our peripheral desintation is a fixed - * address in memory. - */ - hwcfg |= S3C24XX_DISRCC_INC_FIXED; - - /* - * Individual dma operations are requested by the slave, - * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE). - */ - txd->dcon |= S3C24XX_DCON_SERV_SINGLE; - - if (direction == DMA_MEM_TO_DEV) { - txd->disrcc = S3C24XX_DISRCC_LOC_AHB | - S3C24XX_DISRCC_INC_INCREMENT; - txd->didstc = hwcfg; - slave_addr = s3cchan->cfg.dst_addr; - txd->width = s3cchan->cfg.dst_addr_width; - } else { - txd->disrcc = hwcfg; - txd->didstc = S3C24XX_DIDSTC_LOC_AHB | - S3C24XX_DIDSTC_INC_INCREMENT; - slave_addr = s3cchan->cfg.src_addr; - txd->width = s3cchan->cfg.src_addr_width; - } - - sg_len = size / period; - - for (i = 0; i < sg_len; i++) { - dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); - if (!dsg) { - s3c24xx_dma_free_txd(txd); - return NULL; - } - list_add_tail(&dsg->node, &txd->dsg_list); - - dsg->len = period; - /* Check last period length */ - if (i == sg_len - 1) - dsg->len = size - period * i; - if (direction == DMA_MEM_TO_DEV) { - dsg->src_addr = addr + period * i; - dsg->dst_addr = slave_addr; - } else { /* DMA_DEV_TO_MEM */ - dsg->src_addr = slave_addr; - dsg->dst_addr = addr + period * i; - } - } - - return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); -} - -static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( - struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; - struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; - struct s3c24xx_txd *txd; - struct s3c24xx_sg *dsg; - struct scatterlist *sg; - dma_addr_t slave_addr; - u32 hwcfg = 0; - int tmp; - - dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n", - sg_dma_len(sgl), s3cchan->name); - - txd = s3c24xx_dma_get_txd(); - if (!txd) - return NULL; - - if (cdata->handshake) - txd->dcon |= S3C24XX_DCON_HANDSHAKE; - - switch (cdata->bus) { - case S3C24XX_DMA_APB: - txd->dcon |= S3C24XX_DCON_SYNC_PCLK; - hwcfg |= S3C24XX_DISRCC_LOC_APB; - break; - case S3C24XX_DMA_AHB: - txd->dcon |= S3C24XX_DCON_SYNC_HCLK; - hwcfg |= S3C24XX_DISRCC_LOC_AHB; - break; - } - - /* - * Always assume our peripheral desintation is a fixed - * address in memory. - */ - hwcfg |= S3C24XX_DISRCC_INC_FIXED; - - /* - * Individual dma operations are requested by the slave, - * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE). - */ - txd->dcon |= S3C24XX_DCON_SERV_SINGLE; - - if (direction == DMA_MEM_TO_DEV) { - txd->disrcc = S3C24XX_DISRCC_LOC_AHB | - S3C24XX_DISRCC_INC_INCREMENT; - txd->didstc = hwcfg; - slave_addr = s3cchan->cfg.dst_addr; - txd->width = s3cchan->cfg.dst_addr_width; - } else if (direction == DMA_DEV_TO_MEM) { - txd->disrcc = hwcfg; - txd->didstc = S3C24XX_DIDSTC_LOC_AHB | - S3C24XX_DIDSTC_INC_INCREMENT; - slave_addr = s3cchan->cfg.src_addr; - txd->width = s3cchan->cfg.src_addr_width; - } else { - s3c24xx_dma_free_txd(txd); - dev_err(&s3cdma->pdev->dev, - "direction %d unsupported\n", direction); - return NULL; - } - - for_each_sg(sgl, sg, sg_len, tmp) { - dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); - if (!dsg) { - s3c24xx_dma_free_txd(txd); - return NULL; - } - list_add_tail(&dsg->node, &txd->dsg_list); - - dsg->len = sg_dma_len(sg); - if (direction == DMA_MEM_TO_DEV) { - dsg->src_addr = sg_dma_address(sg); - dsg->dst_addr = slave_addr; - } else { /* DMA_DEV_TO_MEM */ - dsg->src_addr = slave_addr; - dsg->dst_addr = sg_dma_address(sg); - } - } - - return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); -} - -/* - * Slave transactions callback to the slave device to allow - * synchronization of slave DMA signals with the DMAC enable - */ -static void s3c24xx_dma_issue_pending(struct dma_chan *chan) -{ - struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); - unsigned long flags; - - spin_lock_irqsave(&s3cchan->vc.lock, flags); - if (vchan_issue_pending(&s3cchan->vc)) { - if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING) - s3c24xx_dma_phy_alloc_and_start(s3cchan); - } - spin_unlock_irqrestore(&s3cchan->vc.lock, flags); -} - -/* - * Bringup and teardown - */ - -/* - * Initialise the DMAC memcpy/slave channels. - * Make a local wrapper to hold required data - */ -static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma, - struct dma_device *dmadev, unsigned int channels, bool slave) -{ - struct s3c24xx_dma_chan *chan; - int i; - - INIT_LIST_HEAD(&dmadev->channels); - - /* - * Register as many memcpy as we have physical channels, - * we won't always be able to use all but the code will have - * to cope with that situation. - */ - for (i = 0; i < channels; i++) { - chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL); - if (!chan) - return -ENOMEM; - - chan->id = i; - chan->host = s3cdma; - chan->state = S3C24XX_DMA_CHAN_IDLE; - - if (slave) { - chan->slave = true; - chan->name = kasprintf(GFP_KERNEL, "slave%d", i); - if (!chan->name) - return -ENOMEM; - } else { - chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i); - if (!chan->name) - return -ENOMEM; - } - dev_dbg(dmadev->dev, - "initialize virtual channel \"%s\"\n", - chan->name); - - chan->vc.desc_free = s3c24xx_dma_desc_free; - vchan_init(&chan->vc, dmadev); - } - dev_info(dmadev->dev, "initialized %d virtual %s channels\n", - i, slave ? "slave" : "memcpy"); - return i; -} - -static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev) -{ - struct s3c24xx_dma_chan *chan = NULL; - struct s3c24xx_dma_chan *next; - - list_for_each_entry_safe(chan, - next, &dmadev->channels, vc.chan.device_node) { - list_del(&chan->vc.chan.device_node); - tasklet_kill(&chan->vc.task); - } -} - -/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */ -static struct soc_data soc_s3c2410 = { - .stride = 0x40, - .has_reqsel = false, - .has_clocks = false, -}; - -/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */ -static struct soc_data soc_s3c2412 = { - .stride = 0x40, - .has_reqsel = true, - .has_clocks = true, -}; - -/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */ -static struct soc_data soc_s3c2443 = { - .stride = 0x100, - .has_reqsel = true, - .has_clocks = true, -}; - -static const struct platform_device_id s3c24xx_dma_driver_ids[] = { - { - .name = "s3c2410-dma", - .driver_data = (kernel_ulong_t)&soc_s3c2410, - }, { - .name = "s3c2412-dma", - .driver_data = (kernel_ulong_t)&soc_s3c2412, - }, { - .name = "s3c2443-dma", - .driver_data = (kernel_ulong_t)&soc_s3c2443, - }, - { }, -}; - -static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev) -{ - return (struct soc_data *) - platform_get_device_id(pdev)->driver_data; -} - -static int s3c24xx_dma_probe(struct platform_device *pdev) -{ - const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev); - struct s3c24xx_dma_engine *s3cdma; - struct soc_data *sdata; - struct resource *res; - int ret; - int i; - - if (!pdata) { - dev_err(&pdev->dev, "platform data missing\n"); - return -ENODEV; - } - - /* Basic sanity check */ - if (pdata->num_phy_channels > MAX_DMA_CHANNELS) { - dev_err(&pdev->dev, "too many dma channels %d, max %d\n", - pdata->num_phy_channels, MAX_DMA_CHANNELS); - return -EINVAL; - } - - sdata = s3c24xx_dma_get_soc_data(pdev); - if (!sdata) - return -EINVAL; - - s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL); - if (!s3cdma) - return -ENOMEM; - - s3cdma->pdev = pdev; - s3cdma->pdata = pdata; - s3cdma->sdata = sdata; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - s3cdma->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(s3cdma->base)) - return PTR_ERR(s3cdma->base); - - s3cdma->phy_chans = devm_kcalloc(&pdev->dev, - pdata->num_phy_channels, - sizeof(struct s3c24xx_dma_phy), - GFP_KERNEL); - if (!s3cdma->phy_chans) - return -ENOMEM; - - /* acquire irqs and clocks for all physical channels */ - for (i = 0; i < pdata->num_phy_channels; i++) { - struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; - char clk_name[6]; - - phy->id = i; - phy->base = s3cdma->base + (i * sdata->stride); - phy->host = s3cdma; - - phy->irq = platform_get_irq(pdev, i); - if (phy->irq < 0) - continue; - - ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq, - 0, pdev->name, phy); - if (ret) { - dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n", - i, ret); - continue; - } - - if (sdata->has_clocks) { - sprintf(clk_name, "dma.%d", i); - phy->clk = devm_clk_get(&pdev->dev, clk_name); - if (IS_ERR(phy->clk) && sdata->has_clocks) { - dev_err(&pdev->dev, "unable to acquire clock for channel %d, error %lu\n", - i, PTR_ERR(phy->clk)); - continue; - } - - ret = clk_prepare(phy->clk); - if (ret) { - dev_err(&pdev->dev, "clock for phy %d failed, error %d\n", - i, ret); - continue; - } - } - - spin_lock_init(&phy->lock); - phy->valid = true; - - dev_dbg(&pdev->dev, "physical channel %d is %s\n", - i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE"); - } - - /* Initialize memcpy engine */ - dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask); - dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask); - s3cdma->memcpy.dev = &pdev->dev; - s3cdma->memcpy.device_free_chan_resources = - s3c24xx_dma_free_chan_resources; - s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy; - s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status; - s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending; - s3cdma->memcpy.device_config = s3c24xx_dma_set_runtime_config; - s3cdma->memcpy.device_terminate_all = s3c24xx_dma_terminate_all; - s3cdma->memcpy.device_synchronize = s3c24xx_dma_synchronize; - - /* Initialize slave engine for SoC internal dedicated peripherals */ - dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask); - dma_cap_set(DMA_CYCLIC, s3cdma->slave.cap_mask); - dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask); - s3cdma->slave.dev = &pdev->dev; - s3cdma->slave.device_free_chan_resources = - s3c24xx_dma_free_chan_resources; - s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status; - s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending; - s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg; - s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic; - s3cdma->slave.device_config = s3c24xx_dma_set_runtime_config; - s3cdma->slave.device_terminate_all = s3c24xx_dma_terminate_all; - s3cdma->slave.device_synchronize = s3c24xx_dma_synchronize; - s3cdma->slave.filter.map = pdata->slave_map; - s3cdma->slave.filter.mapcnt = pdata->slavecnt; - s3cdma->slave.filter.fn = s3c24xx_dma_filter; - - /* Register as many memcpy channels as there are physical channels */ - ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy, - pdata->num_phy_channels, false); - if (ret <= 0) { - dev_warn(&pdev->dev, - "%s failed to enumerate memcpy channels - %d\n", - __func__, ret); - goto err_memcpy; - } - - /* Register slave channels */ - ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave, - pdata->num_channels, true); - if (ret <= 0) { - dev_warn(&pdev->dev, - "%s failed to enumerate slave channels - %d\n", - __func__, ret); - goto err_slave; - } - - ret = dma_async_device_register(&s3cdma->memcpy); - if (ret) { - dev_warn(&pdev->dev, - "%s failed to register memcpy as an async device - %d\n", - __func__, ret); - goto err_memcpy_reg; - } - - ret = dma_async_device_register(&s3cdma->slave); - if (ret) { - dev_warn(&pdev->dev, - "%s failed to register slave as an async device - %d\n", - __func__, ret); - goto err_slave_reg; - } - - platform_set_drvdata(pdev, s3cdma); - dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n", - pdata->num_phy_channels); - - return 0; - -err_slave_reg: - dma_async_device_unregister(&s3cdma->memcpy); -err_memcpy_reg: - s3c24xx_dma_free_virtual_channels(&s3cdma->slave); -err_slave: - s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy); -err_memcpy: - if (sdata->has_clocks) - for (i = 0; i < pdata->num_phy_channels; i++) { - struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; - if (phy->valid) - clk_unprepare(phy->clk); - } - - return ret; -} - -static void s3c24xx_dma_free_irq(struct platform_device *pdev, - struct s3c24xx_dma_engine *s3cdma) -{ - int i; - - for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) { - struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; - - devm_free_irq(&pdev->dev, phy->irq, phy); - } -} - -static int s3c24xx_dma_remove(struct platform_device *pdev) -{ - const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev); - struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev); - struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev); - int i; - - dma_async_device_unregister(&s3cdma->slave); - dma_async_device_unregister(&s3cdma->memcpy); - - s3c24xx_dma_free_irq(pdev, s3cdma); - - s3c24xx_dma_free_virtual_channels(&s3cdma->slave); - s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy); - - if (sdata->has_clocks) - for (i = 0; i < pdata->num_phy_channels; i++) { - struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; - if (phy->valid) - clk_unprepare(phy->clk); - } - - return 0; -} - -static struct platform_driver s3c24xx_dma_driver = { - .driver = { - .name = "s3c24xx-dma", - }, - .id_table = s3c24xx_dma_driver_ids, - .probe = s3c24xx_dma_probe, - .remove = s3c24xx_dma_remove, -}; - -module_platform_driver(s3c24xx_dma_driver); - -bool s3c24xx_dma_filter(struct dma_chan *chan, void *param) -{ - struct s3c24xx_dma_chan *s3cchan; - - if (chan->device->dev->driver != &s3c24xx_dma_driver.driver) - return false; - - s3cchan = to_s3c24xx_dma_chan(chan); - - return s3cchan->id == (uintptr_t)param; -} -EXPORT_SYMBOL(s3c24xx_dma_filter); - -MODULE_DESCRIPTION("S3C24XX DMA Driver"); -MODULE_AUTHOR("Heiko Stuebner"); -MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h deleted file mode 100644 index 96d02db..0000000 --- a/include/linux/platform_data/dma-s3c24xx.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * S3C24XX DMA handling - * - * Copyright (c) 2013 Heiko Stuebner - */ - -/* Helper to encode the source selection constraints for early s3c socs. */ -#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) - -enum s3c24xx_dma_bus { - S3C24XX_DMA_APB, - S3C24XX_DMA_AHB, -}; - -/** - * @bus: on which bus does the peripheral reside - AHB or APB. - * @handshake: is a handshake with the peripheral necessary - * @chansel: channel selection information, depending on variant; reqsel for - * s3c2443 and later and channel-selection map for earlier SoCs - * see CHANSEL doc in s3c2443-dma.c - */ -struct s3c24xx_dma_channel { - enum s3c24xx_dma_bus bus; - bool handshake; - u16 chansel; -}; - -struct dma_slave_map; - -/** - * struct s3c24xx_dma_platdata - platform specific settings - * @num_phy_channels: number of physical channels - * @channels: array of virtual channel descriptions - * @num_channels: number of virtual channels - * @slave_map: dma slave map matching table - * @slavecnt: number of elements in slave_map - */ -struct s3c24xx_dma_platdata { - int num_phy_channels; - struct s3c24xx_dma_channel *channels; - int num_channels; - const struct dma_slave_map *slave_map; - int slavecnt; -}; - -struct dma_chan; -bool s3c24xx_dma_filter(struct dma_chan *chan, void *param);