From: Daniel Lezcano Date: Mon, 14 Dec 2020 23:38:04 +0000 (+0100) Subject: thermal/core: Remove the 'forced_passive' option X-Git-Tag: v5.15~1713^2~24 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a7d6ba14efb778fc8c65c627a057d5dd29debd04;p=platform%2Fkernel%2Flinux-starfive.git thermal/core: Remove the 'forced_passive' option The code was reorganized in 2012 with the commit 0c01ebbfd3caf1. The main change is a loop on the trip points array and a unconditional call to the throttle() ops of the governors for each of them even if the trip temperature is not reached yet. With this change, the 'forced_passive' is no longer checked in the thermal_zone_device_update() function but in the step wise governor's throttle() callback. As the force_passive does no belong to the trip point array, the thermal_zone_device_update() can not compare with the specified passive temperature, thus does not detect the passive limit has been crossed. Consequently, throttle() is never called and the 'forced_passive' branch is unreached. In addition, the default processor cooling device is not automatically bound to the thermal zone if there is not passive trip point, thus the 'forced_passive' can not operate. If there is an active trip point, then the throttle function will be called to mitigate at this temperature and the 'forced_passive' will override the mitigation of the active trip point in this case but with the default cooling device bound to the thermal zone, so usually a fan, and that is not a passive cooling effect. Given the regression exists since more than 8 years, nobody complained and at the best of my knowledge there is no bug open in https://bugzilla.kernel.org, it is reasonable to say it is unused. Remove the 'forced_passive' related code. Signed-off-by: Daniel Lezcano Reviewed-by: Thara Gopinath Link: https://lore.kernel.org/r/20201214233811.485669-1-daniel.lezcano@linaro.org --- diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index e7520cb..a4969c4 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -520,19 +520,6 @@ available_policies RW, Optional -passive - Attribute is only present for zones in which the passive cooling - policy is not supported by native thermal driver. Default is zero - and can be set to a temperature (in millidegrees) to enable a - passive trip point for the zone. Activation is done by polling with - an interval of 1 second. - - Unit: millidegrees Celsius - - Valid values: 0 (disabled) or greater than 1000 - - RW, Optional - emul_temp Interface to set the emulated temperature method in thermal zone (sensor). After setting this temperature, the thermal zone may pass diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c index 2ae7198..12acb12 100644 --- a/drivers/thermal/gov_step_wise.c +++ b/drivers/thermal/gov_step_wise.c @@ -109,7 +109,7 @@ static void update_passive_instance(struct thermal_zone_device *tz, * If value is +1, activate a passive instance. * If value is -1, deactivate a passive instance. */ - if (type == THERMAL_TRIP_PASSIVE || type == THERMAL_TRIPS_NONE) + if (type == THERMAL_TRIP_PASSIVE) tz->passive += value; } @@ -122,13 +122,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) bool throttle = false; int old_target; - if (trip == THERMAL_TRIPS_NONE) { - trip_temp = tz->forced_passive; - trip_type = THERMAL_TRIPS_NONE; - } else { - tz->ops->get_trip_temp(tz, trip, &trip_temp); - tz->ops->get_trip_type(tz, trip, &trip_type); - } + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_type(tz, trip, &trip_type); trend = get_tz_trend(tz, trip); @@ -189,9 +184,6 @@ static int step_wise_throttle(struct thermal_zone_device *tz, int trip) thermal_zone_trip_update(tz, trip); - if (tz->forced_passive) - thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE); - mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index 0866e94..4e7f9e8 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -217,49 +217,6 @@ trip_point_hyst_show(struct device *dev, struct device_attribute *attr, } static ssize_t -passive_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int state; - - if (sscanf(buf, "%d\n", &state) != 1) - return -EINVAL; - - /* sanity check: values below 1000 millicelcius don't make sense - * and can cause the system to go into a thermal heart attack - */ - if (state && state < 1000) - return -EINVAL; - - if (state && !tz->forced_passive) { - if (!tz->passive_delay) - tz->passive_delay = 1000; - thermal_zone_device_rebind_exception(tz, "Processor", - sizeof("Processor")); - } else if (!state && tz->forced_passive) { - tz->passive_delay = 0; - thermal_zone_device_unbind_exception(tz, "Processor", - sizeof("Processor")); - } - - tz->forced_passive = state; - - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return count; -} - -static ssize_t -passive_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - - return sprintf(buf, "%d\n", tz->forced_passive); -} - -static ssize_t policy_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -403,7 +360,6 @@ static DEVICE_ATTR_RW(sustainable_power); /* These thermal zone device attributes are created based on conditions */ static DEVICE_ATTR_RW(mode); -static DEVICE_ATTR_RW(passive); /* These attributes are unconditionally added to a thermal zone */ static struct attribute *thermal_zone_dev_attrs[] = { @@ -438,45 +394,9 @@ static const struct attribute_group thermal_zone_mode_attribute_group = { .attrs = thermal_zone_mode_attrs, }; -/* We expose passive only if passive trips are present */ -static struct attribute *thermal_zone_passive_attrs[] = { - &dev_attr_passive.attr, - NULL, -}; - -static umode_t thermal_zone_passive_is_visible(struct kobject *kobj, - struct attribute *attr, - int attrno) -{ - struct device *dev = kobj_to_dev(kobj); - struct thermal_zone_device *tz; - enum thermal_trip_type trip_type; - int count, passive = 0; - - tz = container_of(dev, struct thermal_zone_device, device); - - for (count = 0; count < tz->trips && !passive; count++) { - tz->ops->get_trip_type(tz, count, &trip_type); - - if (trip_type == THERMAL_TRIP_PASSIVE) - passive = 1; - } - - if (!passive) - return attr->mode; - - return 0; -} - -static const struct attribute_group thermal_zone_passive_attribute_group = { - .attrs = thermal_zone_passive_attrs, - .is_visible = thermal_zone_passive_is_visible, -}; - static const struct attribute_group *thermal_zone_attribute_groups[] = { &thermal_zone_attribute_group, &thermal_zone_mode_attribute_group, - &thermal_zone_passive_attribute_group, /* This is not NULL terminated as we create the group dynamically */ }; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index c800323..a57232a 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -131,9 +131,6 @@ struct thermal_cooling_device { trip point. * @prev_high_trip: the above current temperature if you've crossed a passive trip point. - * @forced_passive: If > 0, temperature at which to switch on all ACPI - * processor cooling devices. Currently only used by the - * step-wise governor. * @need_update: if equals 1, thermal_zone_device_update needs to be invoked. * @ops: operations this &thermal_zone_device supports * @tzp: thermal zone parameters @@ -167,7 +164,6 @@ struct thermal_zone_device { int passive; int prev_low_trip; int prev_high_trip; - unsigned int forced_passive; atomic_t need_update; struct thermal_zone_device_ops *ops; struct thermal_zone_params *tzp;