From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 17 Jun 2015 19:16:59 +0000 (+0200)
Subject: sunxi: ga10h: Enable both otg and regular usb host controllers
X-Git-Tag: v2015.10-rc1~69^2~1
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a51c832cc18aeec439648f39f6759a1978206132;p=platform%2Fkernel%2Fu-boot.git

sunxi: ga10h: Enable both otg and regular usb host controllers

This allows using devices plugged into both ports of the tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index 7abd0ae..5cd2e92 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -332,6 +332,24 @@
 			#size-cells = <0>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
index 8667033..da16343 100644
--- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -61,6 +61,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -109,6 +113,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
 		allwinner,pins = "PB4";
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 3d75ecd..e766db4 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291
 CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -23,3 +24,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_EHCI_HCD=y