From: Roger Quadros Date: Mon, 25 Aug 2014 23:15:33 +0000 (-0700) Subject: ARM: OMAP2+: GPMC: Support Software ECC scheme via DT X-Git-Tag: v4.14-rc1~6898^2~9^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a3e83f05fbbf6c4994c658521a750bbd68bdf7a6;p=platform%2Fkernel%2Flinux-rpi.git ARM: OMAP2+: GPMC: Support Software ECC scheme via DT For v3.14 and prior, 1-bit Hamming code ECC via software was the default choice for some boards e.g. 3430sdp. Commit ac65caf514ec in v3.15 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.14 and prior to be unusable in v3.15 and later. So don't mark "sw" scheme as deperecated and support it. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 65f4f7c..ee654e9 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -22,7 +22,7 @@ Optional properties: width of 8 is assumed. - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" use "ham1" instead + "sw" 1-bit Hamming ecc code via software "hw" use "ham1" instead "hw-romcode" use "ham1" instead "ham1" 1-bit Hamming ecc code diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8bc1338..9f42d54 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, pr_err("%s: ti,nand-ecc-opt not found\n", __func__); return -ENODEV; } - if (!strcmp(s, "ham1") || !strcmp(s, "sw") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + + if (!strcmp(s, "sw")) + gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_HW; else if (!strcmp(s, "bch4"))