From: Grygorii Strashko Date: Sat, 12 Jun 2021 01:14:31 +0000 (+0300) Subject: ARM: dts: am335x-pdu001: switch to new cpsw switch drv X-Git-Tag: accepted/tizen/unified/20230118.172025~6510^2~17^2~8 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a2f2cd466e7f5b383b8adb26487df3fd072bdfdc;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: am335x-pdu001: switch to new cpsw switch drv The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers. So, switch EETS,PDU001 to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index d41a5ff..b793bee 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -494,17 +494,15 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <&cpsw_default>; - dual_emac; /* no switch, two distinct MACs */ status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; @@ -515,16 +513,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "mii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "mii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &tscadc {