From: Dmitry Baryshkov Date: Fri, 11 Jun 2010 01:52:34 +0000 (+0000) Subject: powerpc/5200: add lite5200 onboard I2C eeprom and flash X-Git-Tag: v2.6.35-rc4~67^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a2c9a603c72be0d9a0780f196bff53ab0d517347;p=platform%2Fkernel%2Flinux-3.10.git powerpc/5200: add lite5200 onboard I2C eeprom and flash Add dts descriptions for onboard 256 byte I2C eeprom (pcf8582C-2) and 16MB NOR flash (am29lv652d). Signed-off-by: Dmitry Eremin-Solenikov [grant.likely@secretlab.ca: added lite5200b eeprom and declared lite5200 gpios] Signed-off-by: Grant Likely --- diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 82ff2b1..d1502ef 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -134,12 +134,16 @@ compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { @@ -255,7 +259,13 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; }; + sram@8000 { compatible = "fsl,mpc5200-sram"; reg = <0x8000 0x4000>; @@ -281,4 +291,18 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff000000 0x01000000>; + + flash@0,0 { + compatible = "amd,am29lv652d", "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index e45a63b..59702ac 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -259,6 +259,11 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; }; sram@8000 {