From: Pali Rohár Date: Wed, 11 May 2022 18:27:12 +0000 (+0200) Subject: mmc: fsl_esdhc: Set fallback mode to 1-bit X-Git-Tag: v2022.10~89^2~20^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a29eb319a3f8ccfb657053b2941581fa1933974e;p=platform%2Fkernel%2Fu-boot.git mmc: fsl_esdhc: Set fallback mode to 1-bit 8-bit mode is not supported by SD cards and on P2020 are four SDHC pins shared with SPI (so if P2020 board have also SPI then only 4-bit SDHC mode is provided). So 8-bit SDHC mode is really bad default. When max bus width is not provided then set mode to 1-bit. This mode is supported by all cards, so it is the best option for fallback mode. Also P2020 bootrom sets mode to 1-bit when booting from SD/MMC card. Signed-off-by: Pali Rohár Reviewed-by: Jaehoon Chung --- diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index fdf2cc2..6c6d03d 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -946,9 +946,8 @@ int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg) } else if (cfg->max_bus_width == 1) { mmc_cfg->host_caps |= MMC_MODE_1BIT; } else { - mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT | - MMC_MODE_8BIT; - printf("No max bus width provided. Assume 8-bit supported.\n"); + mmc_cfg->host_caps |= MMC_MODE_1BIT; + printf("No max bus width provided. Fallback to 1-bit mode.\n"); } if (IS_ENABLED(CONFIG_ESDHC_DETECT_8_BIT_QUIRK))