From: Moiz Sonasath Date: Wed, 17 Feb 2010 00:57:21 +0000 (-0600) Subject: mfd: Disable TWL4030/5030 I2C1/I2C4 internal pull-ups X-Git-Tag: v2.6.34-rc1~9^2~20 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a29aaf55cd6faa75e35abfe00bd3ffc537490485;p=platform%2Fkernel%2Flinux-stable.git mfd: Disable TWL4030/5030 I2C1/I2C4 internal pull-ups This patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to use only the external HW resistor >=470 Ohm for the assured functionality in HS mode. While testing the I2C in High Speed mode, it was discovered that without a proper pull-up resistor, there is data corruption during multi-byte transfer. RTC(time_set) test case was used for testing. From the analysis done, it was concluded that ideally we need a pull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for assured performance in HS mode. Signed-off-by: Moiz Sonasath Signed-off-by: Allen Pais Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 942a1e8..7ccc39f 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -958,6 +958,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) int status; unsigned i; struct twl4030_platform_data *pdata = client->dev.platform_data; + u8 temp; if (!pdata) { dev_dbg(&client->dev, "no platform data?\n"); @@ -1025,6 +1026,18 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) goto fail; } + /* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. + * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, + * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. + */ + + if (twl_class_is_4030()) { + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); + temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ + I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); + } + status = add_children(pdata, id->driver_data); fail: if (status < 0) diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 9733e9e..e28d4c0 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -239,6 +239,21 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset); /*----------------------------------------------------------------------*/ +/*Interface Bit Register (INTBR) offsets + *(Use TWL_4030_MODULE_INTBR) + */ + +#define REG_GPPUPDCTR1 0x0F + +/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */ + +#define I2C_SCL_CTRL_PU BIT(0) +#define I2C_SDA_CTRL_PU BIT(2) +#define SR_I2C_SCL_CTRL_PU BIT(4) +#define SR_I2C_SDA_CTRL_PU BIT(6) + +/*----------------------------------------------------------------------*/ + /* * Keypad register offsets (use TWL4030_MODULE_KEYPAD) * ... SIH/interrupt only