From: Rajendra Nayak Date: Fri, 3 Jul 2020 09:41:33 +0000 (+0530) Subject: arm64: dts: sc7180: Add qspi opps and power-domains X-Git-Tag: v5.10.7~1993^2^2~47 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a24ad4878c6bd6c71968fff764fce31f9863b136;p=platform%2Fkernel%2Flinux-rpi.git arm64: dts: sc7180: Add qspi opps and power-domains Add the power domain supporting performance state and the corresponding OPP tables for the qspi device on sc7180 Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593769293-6354-4-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 2be81a2..34a6d83 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2407,6 +2407,25 @@ status = "disabled"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qspi: spi@88dc000 { compatible = "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; @@ -2419,6 +2438,8 @@ interconnects = <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QSPI_0>; interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qspi_opp_table>; status = "disabled"; };