From: Pratyush Yadav
Date: Fri, 25 Jun 2021 19:17:03 +0000 (+0530)
Subject: spi: spi-mem: allow specifying whether an op is DTR or not
X-Git-Tag: v2021.10~124^2~4^2~26
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a1eb40b70b40d208a72765c0f56cffed4e22ff30;p=platform%2Fkernel%2Fu-boot.git
spi: spi-mem: allow specifying whether an op is DTR or not
Each phase is given a separate 'dtr' field so mixed protocols like
4S-4D-4D can be supported.
Signed-off-by: Pratyush Yadav
Reviewed-by: Jagan Teki
---
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index c095ae9..427f7c1 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -164,6 +164,9 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
+ if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+ return false;
+
return true;
}
EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
diff --git a/include/spi-mem.h b/include/spi-mem.h
index e354c38..8bd4459 100644
--- a/include/spi-mem.h
+++ b/include/spi-mem.h
@@ -71,6 +71,7 @@ enum spi_mem_data_dir {
* struct spi_mem_op - describes a SPI memory operation
* @cmd.buswidth: number of IO lines used to transmit the command
* @cmd.opcode: operation opcode
+ * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
* @addr.nbytes: number of address bytes to send. Can be zero if the operation
* does not need to send an address
* @addr.buswidth: number of IO lines used to transmit the address cycles
@@ -78,10 +79,13 @@ enum spi_mem_data_dir {
* Note that only @addr.nbytes are taken into account in this
* address value, so users should make sure the value fits in the
* assigned number of bytes.
+ * @addr.dtr: whether the address should be sent in DTR mode or not
* @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
* be zero if the operation does not require dummy bytes
* @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not
* @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dtr: whether the data should be sent in DTR mode or not
* @data.dir: direction of the transfer
* @data.buf.in: input buffer
* @data.buf.out: output buffer
@@ -90,21 +94,25 @@ struct spi_mem_op {
struct {
u8 buswidth;
u8 opcode;
+ u8 dtr : 1;
} cmd;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
u64 val;
} addr;
struct {
u8 nbytes;
u8 buswidth;
+ u8 dtr : 1;
} dummy;
struct {
u8 buswidth;
+ u8 dtr : 1;
enum spi_mem_data_dir dir;
unsigned int nbytes;
/* buf.{in,out} must be DMA-able. */